ADVANTECH ICR-3200 Cellular Router Instruction Manual
ICR-3200
4.5 WiFi Access Point Configuration
This item is available only if the router is equipped with a WiFi module.
ICR-3241(W)-1ND models may have some default configurations different or restricted.
Configuration of two separated WLANs (Multiple SSIDs) is supported.
Multi-role mode, which allows to operate as access point (AP) and station (STA) simultane-
ously, is supported. The multichannel mode is not supported, so the AP and the STA must
operate on the same channel only. Please note, that only one AP can be activated together
with the STA in operation.
RADIUS (Remote Authentication Dial-In User Service) networking protocol that provides cen-
tralized Authentication, Authorization, and Accounting (AAA) management for users is sup-
ported on WiFi. The router can be RADIUS client only (not the server) – typically as a WiFi
AP (Access Point) negotiating with the RADIUS server.
Activate WiFi access point mode by checking Enable WiFi AP box at the top of the Con-
figuration -> WiFi -> Access Point 1 or Access Point 2 configuration pages. In this mode the
router becomes an access point to which other devices in station (STA) mode can connect.
You may set the following properties listed in the table below.
Item
Description
Enable WiFi AP
IP Address
Enable WiFi access point (AP).
A fixed IP address of the WiFi interface. Use IPv4 notation in IPv4
column and IPv6 notation in IPv6 column. Shortened IPv6 notation
is supported.
Subnet Mask / Pre- Specifies a Subnet Mask for the IPv4 address. In the IPv6 column,
fix
fill in the Prefix for the IPv6 address – number in range 0 to 128.
Bridged
Activates bridge mode:
• no – Bridged mode is not allowed (default value). WLAN net-
work is not connected with LAN network of the router.
• yes – Bridged mode is allowed. WLAN network is connected
with one or more LAN networks of the router. In this case,
the setting of most items in this table are ignored. Instead,
the router uses the settings of the selected network interface
(LAN).
Enable dynamic Enable dynamic allocation of IP addresses using the DHCP
DHCP leases (DHCPv6) server.
Continued on next page
53
| General | Details |
|---|---|
| Name | ADVANTECH ICR-3200 Cellular Router Instruction Manual |
| Make | Advantech |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.17 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding ADVANTECH ICR-3200 Cellular Router Instruction Manual, please ask here and describe the problem in detail.
ADVANTECH ICR-2701 Engineering Portal Cellular Router User Guide
ADVANTECH ICR-2531 LTE Router User Manual
advantech ICR-3831 RAILWAY 4G LTE ROUTER & GATEWAY User Guide
ADVANTECH SL302 SmartStart LTE Router User Manual
ADVANTECH ICR-2431 LTE Router User Manual
ADVANTECH ICR-2041 LTE Router User Manual
Cudy LT700 4G LTE CAT 6 Wi-Fi Router Installation Guide
DrayTek Vigor2962 Series Security VPN Router User Guide
D-Link DSR-250V2 Unified Services Router Installation Guide
D-Link DIR-400 Wireless Router Instructions
D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router Installation Guide
ASUS RT-AC67P Dual Band AC Wi-Fi Router User Guide
ADDAC System ADDAC809 Chain Router User Guide
LITE-ON WPXE8326 Wi-Fi 6E Access Point Mesh Router User Manual
D-Link N300 4G Smart Router User Guide
TP-Link AX6600 Tri Band WiFi 6 Router Installation Guide