AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual
AKYPACH
Inserting A Router Bit into the Collet:
With the collet nut loose, slide the router bit into the collet insert. Make sure that
you have at least 3/4” of the router bit shank inserted into the collet.
Do not bottom out the bit in the collet. If you insert the shank to the bottom of the
collet bore, make sure to pull it out at least 1/16” to 1/8” to allow the collet insert
to properly secure the router bit in the collet.
There is a button on the motor housing that will lock the spindle to allow you to
tighten and loosen the collet nut using the supplied wrench.
It will be necessary for the spindle to rotate until the spindle lock pinengages the
locking hole on the spindle. Before tightening the bit, make sure the flutes of the
bit are completely visible outside the collet.
Otherwise, it can result in broken bits and possible injury. The power cord should
be unplugged from the power source when making bit changes to prevent the router
from being turned on by accident.
WARNING! Never use dull or damaged bits. Damaged bits can break without
warning.Dull bits may overload the motor, cut slowly and are difficult to control.
They will also overheat and possibly break.
- 11 -
| General | Details |
|---|---|
| Name | AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual |
| Make | AKYPACH |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.45 MB |
If you have any questions regarding AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual, please ask here and describe the problem in detail.

AKYPACH B0C28L468H Wood Router Instruction Manual

AKYPACH A2 Wood Router Instruction Manual

AKYPACH 15PCS Wood Router Instruction Manual






























