AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

AKYPACH  

Using the Trimmer Guide:  

Trimming thin stock or veneers can be accomplished with a 1/4” straight bit and  

the trimming guide.  

Install the bit into the collet and adjust the bit height to just slightly taller than the  

stock you will be trimming.  

Using the clamping screw (A), secure the trimming guide to the router base so that  

the ball bearing guide is located just below the straight bit, but make sure the bit  

does not contact the roller bearing assembly.  

To adjust the roller flush with the edge of the router bit, loosen clamping screw  

(B) on the trimmer guide. Use the lower knob on the trimmer guide to adjust the  

position of the roller flush with the bit.  

Once they are flush, secure the position of the roller by tightening clamping screw  

(B). When you make your cut, the roller will follow the substrate, which will act as  

your template while the router bit trims the thin stock or veneer flush to the substrate.  

The roller can also be offset to allow a slight overhang when working with veneer  

and you prefer to butt the vertical and horizontal veneer pieces and sand the edge  

to relieve the sharp corner.  

Using the Template Guide Bushing:  

The template guide provides a sleeve that allows the router bit to pass through  

for following a template commonly used for sign lettering or hinge mortising  

operations.  

To install the template guide bushing, you must remove the four screws that attach  

the sub base to the router base.  

Remove the sub base and position the template guide bushing, tip facing downward  

on the router base.  

Reinstall the sub base and screws to “trap” the template guide bushing in place.  

To use the template guide, place the router base onto the template and move the  

router around the template, keeping the tip of the template guide bushing in contact  

with the template.  

- 15 -  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual
Make	AKYPACH
Language	English
Filetype	PDF (Download)
File size	0.45 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• AKYPACH
• ALL WI-FI INSTRUCTIONS & USER MANUALS

Questions and Answers (0)

If you have any questions regarding AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual, please ask here and describe the problem in detail.