AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

AKYPACH  

Additional Safety instructions for use of Routers  

1

Make sure you have read and fully understood the General instructions and  

safety precautions that are printed in the preceding pages of this manual.  

2

Before connecting the router to the power supply, check the tool for obvious  

signs of damage, paying particular attention to the plug and the power cord. Correct  

any damage you discover. Be sure the router bit you are about to fit is the correct  

tool for the job. Check the bit for damage, make sure it is sharp and clean, check  

that you have the correct collet for the tool shank size you are about to fit, and  

ensure that a sufficient length of the shank is inserted in the collet to guarantee  

a secure hold of the bit. Make sure the tools you use to fit the router bit, or the  

accessories, are the correct ones. DO NOT risk damaging the tool by using the  

wrong size collet wrenches, allen keys, etc. Make sure the 'chip screens' (if available)  

are fitted securely. If dust extraction is available, connect it.  

3

Check that there are no foreign objects, e.g. old nails, screws, small stones  

etc., embedded in the work-piece.  

4

Set the depth of cut, either as a single depth or incrementally (for deep  

cuts). Install and set the guide fence if required.  

5

Ensure the machine is switched off. ('0' showing) (Never turn on the power  

unless you are actually holding the machine). Plug the power cord into a correctly  

rated switched outlet. If you are working outside, check that any extension cords  

in use are rated for outside work.  

6

Make sure you are holding the machine in a safe position, the cutter bit  

is not in contact with anything, and the 'cutting depth' is locked. Give the machine  

a quick "burst", to ensure that everything is working correctly, checking especially  

for vibration that might indicate that the cutter is incorrectly installed. If a vibration  

is present, disconnect the machine, re-install the cutter, and test again.  

7

Make sure that the power cord is safely routed away from the operating  

area, and that the router movement during the operation will not drag it within range  

of the cutter.  

- 6 -  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual
Make	AKYPACH
Language	English
Filetype	PDF (Download)
File size	0.45 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• AKYPACH
• ALL WI-FI INSTRUCTIONS & USER MANUALS

Questions and Answers (0)

If you have any questions regarding AKYPACH A2 Wood Router Tool Compact Trim Router Instruction Manual, please ask here and describe the problem in detail.