Home > OptConnect > OptConnect neo 4 Cellular Router User Manual

OptConnect neo 4 Cellular Router User Manual

9. Identify remote access ports for non-ATM  
equipment  
neo is configured for common remote access protocols  
such as https, RDP, vnc, ssh, GoToMyPC, etc. for two clients  
• Learn your preferred protocol’s TCP/IP port number from a  
manual or published resources, ex. https is port 443  
• Prepend a digit to the protocol’s port number to reach  
your equipment according to the table below where xxx is  
the port number on which your equipment will respond:  
To reach your equip on port xxx  
Contact port  
192.168.1.11.................................... xxx  
192.168.1.12.................................... 2xxx  
Ex: directing your browser to <neo IP address> : 2443  
establishes an https session on port 443 with your  
equipment at IP address 192.168.1.12, the 2nd device in  
the table above  
neo is pre-configured for remote access to two static IP  
clients as per the table above. Contact our Customer Care  
Center at 877.678.3343 for custom port configurations or  
to support remote access for more than two clients.  
GeneralDetails
NameOptConnect neo 4 Cellular Router User Manual
MakeOptConnect
LanguageEnglish
FiletypePDF (Download)
File size0.12 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding OptConnect neo 4 Cellular Router User Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

9 − 6 =

OptConnect neo2 dura 4 Multi Carrier Cellular Router User Guide
OptConnect neo2 dura 4 Multi Carrier Cellular Router User Guide

OptConnect neo 4 Cellular Router User Manual