ufiSpace S9600-72XC Router Installation Guide
attached) to the terminal block as depicted in the following figure.
Figure 25.
4. Tighten the screws to the specified torque.
Tighten the screws to a torque value of 14.0+/‐0.5kgf.cm. If the torque is not enough, the lug
will not be secure and may cause malfunctions. If the torque is too much, the terminal block or
lug may be damaged. Secure the plastic cover back onto the terminal block. The figure below
depicts how it should look once the lug is attached and the protective plastic cover reinstalled.
Figure 26.
5. Feed DC power into the system.
The PSU will immediately output 12V and 5VSB to the system with a ‐40 to ‐75V DC power
source. The PSU has a built in 60A, fast acting fuse based on the PSU maximum capacity, which
will act as a second tier system protection in case the power distribution unit’s fuse is not
functioning.
6. Verify that the power supply is operating.
If connected correctly, when turned on, the LED on the PSU will light up with a Green color
designating normal operation.
AC Version
1. Ensure there is enough power to supply the system.
The maximum system power consumption is 685 watts. It is recommended to ensure that
S9600‐72XC Hardware Installation Guide | 20
| General | Details |
|---|---|
| Name | ufiSpace S9600-72XC Router Installation Guide |
| Make | UfiSpace |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.84 MB |
If you have any questions regarding ufiSpace S9600-72XC Router Installation Guide, please ask here and describe the problem in detail.

UfiSpace S9500-30XS Gateway Router Installation Guide

UfiSpace S9600-64X 100G Aggregation Router Installation Guide

UfiSpace S9600-32X 100G Aggregation Router Installation Guide

UfiSpace S9501-28SMT Gateway Router Installation Guide
















































