Home > UfiSpace > ufiSpace S9600-72XC Router Installation Guide

ufiSpace S9600-72XC Router Installation Guide

3. Place the bail (wire handle) in the unlocked position and align the transceiver with the port.  
4. Slide the transceiver into the port and gently push until it is secured in place. An audible click  
can be heard when the transceiver is secured in the port.  
Installing an Antenna  
Make sure the satellite signal strength is greater than 30db, when using a GNSS  
simulator for testing.  
Read the following guidelines before installing your antenna.  
The S960072XC supports various types of receiver frequency types, including GPS/QZSS  
L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN Galileo  
E1B/C.  
The minimum sensitivity of the receiver frequency (RF) is 166dBm.  
The S960072XC supports both passive and active GNSS antennas, and will automatically  
detect which type of antenna is installed.  
If the received signal strength is lower than 30db, the GNSS receiver will fail to produce  
accurate location estimates.  
To optimize antenna performance, it is highly recommended to choose a roof or top floor that is  
free from any signal blockage or obstruction.  
Read the following guidelines before installing an active antenna:  
When an active antenna is installed, the S960072XC can supply up to 5V DC/150mA on the  
GNSS port.  
If any GNSS amplifier, DCblocked or cascaded splitter is inserted, the GNSS detection  
function might be affected, resulting in GNSS satellite clock errors.  
We recommend that you use an active antenna equipped with 50 ohm impedance  
matching, 5V DC power supply capable, max. NF 1.5dB and 35~42dB internal LNA gain to  
get a strong enough signal strength in various weather conditions.  
To prevent damages caused by power surges or lightning strikes, ensure a surge protector  
is attached to the GNSS antenna.  
Figure 35.  
S960072XC Hardware Installation Guide | 29  
GeneralDetails
NameufiSpace S9600-72XC Router Installation Guide
MakeUfiSpace
LanguageEnglish
FiletypePDF (Download)
File size0.84 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

If you have any questions regarding ufiSpace S9600-72XC Router Installation Guide, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

nine + 12 =

UfiSpace S9500-30XS Gateway Router Installation Guide
UfiSpace S9500-30XS Gateway Router Installation Guide
UfiSpace S9600-64X 100G Aggregation Router Installation Guide
UfiSpace S9600-64X 100G Aggregation Router Installation Guide
UfiSpace S9600-32X 100G Aggregation Router Installation Guide
UfiSpace S9600-32X 100G Aggregation Router Installation Guide
UfiSpace S9501-28SMT Gateway Router Installation Guide
UfiSpace S9501-28SMT Gateway Router Installation Guide

ufiSpace S9600-72XC Router Installation Guide