Home > CalAmp > CalAmp LMU-5541 Telematics Router Installation Guide

CalAmp LMU-5541 Telematics Router Installation Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

9/28/23, 4:30 PM

LMU-5541 Hardware & Installation Guide - PULS Wiki

This is the current UDP port the LMU will use to deliver its LM Direct™ data. This value should match UDP port you are using on your LM Direct™ server. It is

typically 20500.

<Inbound Protocol (LMD/LMX)>:

This is the current UDP/IP messaging protocol in use by the LMU. In general it should be LMD.

APP:081 8.3d

COM:0

GPS:No Time Sync INP:11100111 13.7V

MID:4141000100 ESN

INB:207.7.101.227:20500 LMD

7 LMU-LMU5541 Router Configuration & Management

7.1 Configure Maintenance Computer

Change the IP settings on the maintenance computer to match the subnet of the LMU-LMU5541™

Go to Control Panel ? Network and Internet ? Network and Sharing Center ? Change adaptor settings ? Local Area Connection ? Properties ? Internet Protocol

Version 4 (TCP/IPv4) ? Properties ?

Select “Use the following IP address:”

Enter the following IP settings:

Ethernet IP address = 192.168.1.189

Subnet mask = 255.255.255.0

Default gateway = 192.168.1.55

Select OK to apply changes.

7.2 Connect to the router

Use a web browser to log into the LuCI interface. Type 192.168.1.55 into the browser:

7.3 LuCI

Enter Username: root

https://puls.calamp.com/wiki/LMU-5541_Hardware_%26_Installation_Guide