CNC3D QB2 CNC Router User Guide
From here it is now time to upload the job and get it started!
There are two different methods depending on how you are connected to your Nighthawk.
If you are connected via WiFi then please skip ahead to the next page.
If you are connected to your Nighthawk via USB or Bluetooth
Back in our Commander software, Click the “Zero job” button. Then click on Load Job and
select the file you saved out of the surfacing wizard. Once loaded, hit the green run button
on your VFD and wait until the spindle is up to speed. Once at speed, turn on your vacuum
extraction (if attached) and hit the ‘Run Job’ button. See sequence here:
This will start the process of surfacing your spoil board. It may take a long time to complete
this process. If something doesn’t seem right then immediately hit the E‐stop button on your
control box or via our Commander software.
Note: Using the E‐stop on your Nighthawk controller or via our Commander software will
only stop your machine moving but will not stop your spindle. If you want to stop both the
spindle and machine quickly, we recommend using the mechanical E‐stop on your control
box.
QB2 Page 10
QB2 User and Maintenance Guide – Revised 28/09/2022
| General | Details |
|---|---|
| Name | CNC3D QB2 CNC Router User Guide |
| Make | CNC3D |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.11 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding CNC3D QB2 CNC Router User Guide, please ask here and describe the problem in detail.
ASUS TUF-AX4200 TUF Gaming AX4200 Dual Band WiFi Router User Guide
Mercury TD-W8960 Modem Router User Manual
WolfPack HDTVHDMX0808 4K 8×8 HDMI Matrix Router User Manual
inseego FX3100-1 Wavemaker 5G Router User Guide
CSG m212 Dual SIM Wi-Fi 6 Router User Guide
TP-Link Archer C80 Wi-Fi 5 Router Instructions
Cudy WR2100 Gigabit Dualband WLAN Mesh Router Installation Guide
Cisco Router RV345/RV345P User Guide
GUDE OF 1200 E Router Instructions
HUAWEI Router User Guide