CNC3D QB2 CNC Router User Guide
Tramming Front to back
As time goes on, we here at CNC3D like to innovate and improve on our machine designs to
make things like tramming your spindle an easier and user‐friendly process. One of these
improvements is the addition of a “shoulder bolt” on the big Y‐axis plates. There will be
some machines that have these bolts and some that do not so ensure you are following the
correct tramming procedure for your machine.
If your gantry has a shoulder bolt
Shoulder bolts have a washer on the bolt as seen below in BLUE. If you have no washer then you need to follow
the below guide for “NO shoulder bolt”.
If you need to adjust your tramming front to back then we need to look at adjusting the
gantry angle.
To do this, we first need to loosen off *slightly* the shoulder bolt highlighted below in BLUE.
Once these are loose, loosen all of the bolts highlighted in YELLOW below.
QB2 Page 15
QB2 User and Maintenance Guide – Revised 28/09/2022
| General | Details |
|---|---|
| Name | CNC3D QB2 CNC Router User Guide |
| Make | CNC3D |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.11 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding CNC3D QB2 CNC Router User Guide, please ask here and describe the problem in detail.
TELTONIKA RUT950 CAT4 LTE Router User Guide
TP-Link X50-5G Whole Home Mesh Wi-Fi 6 Router User Guide
HFCL Weave Home Mesh Router User Guide
Juniper NETWORKS PTX10001-36MR Packet Transport Router User Guide
PIX-LINK LV-WR09 Wireless-N Repeater AP Router Installation Guide
Zbtlink WE2805-B 4G LTE Router User Guide
Cudy WR1300 Wi-Fi Mesh Router Instruction Manual
Cisco Router RV345/RV345P User Guide
MAGNADYNE RV2458 Router User Guide
Zetronix WiFi Network Router User Manual