Doonink FW40-WIFI Wi-Fi Router User Manual
3.Connection
This industrial-grade router is set by default to self-test when disconnected (the
default setting is dialing 3-5 times, about 10 seconds at a time), the device will
automatically detect network dialing after powering on, and it will automatically
restart if the network is not recognized, so the common installation steps for
first-time installation users are as follows:
Connect the device
You can connect to your router in the following ways.。
1. Wired connection Set the IP address of the computer
Before accessing the web settings page, it is recommended that you set your
computer to "automatically get an IP address" and "automatically get a
DNS serveraddress",andtherouterwillautomaticallyassign anIP address. If
you need to specify a static IP address for a computer, you need to set
the IP address of the computer in the same subnet as the LAN port IP address
of the router (the default IP address of the LAN port of the router
is:192.168.10.1 with a subnet mask of 255.255.255.0).
2. Connect via WIFI
Detect the wireless network of the wireless router
DEFAULT WIFI NAME (SSID): WIFI-7628-XXXX (4 digits after MAC address)
Default WIFI password (Key): 12345678
Then click the 'Connect' button and enter the corresponding password to establish
a connection network, please see the device nameplate for details
4
| General | Details |
|---|---|
| Name | Doonink FW40-WIFI Wi-Fi Router User Manual |
| Make | Doonink |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.62 MB |
If you have any questions regarding Doonink FW40-WIFI Wi-Fi Router User Manual, please ask here and describe the problem in detail.

Doonink FW70 WIFI Router User Manual





























