eero Outdoor 7 Dual Band Mesh Wi-fi Router Installation Guide

1

2

3

4

5

6

7

8

9

10

11

12

Mounting on stucco, fiber cement, or wood:  

1. Use the mounting bracket to mark the position of the  

mounting screws and a level to make sure they are at the  

same height. Make sure the eero logo on the mounting  

bracket is right side up.  

2. For stucco: Drill pilot holes; then insert the anchors. Pilot  

holes should be 9/64 in. for the provided 30 mm anchors  

and #8 screws. Use the screws to attach the mounting  

bracket to the anchors.  

3. For wood or fiber cement: Use the screws to attach  

the mounting bracket.  

Note: Fiber cement panels and shingles often have a  

downward slope. The eero Outdoor 7 will operate properly  

at an angle. Alternatively, the retaining screws can be  

backed off, and the leveling screws in the mounting bracket  

can be used to adjust the up/down angle. If the leveling  

screws are not used, they may be removed.  

Stucco  

Wood  

08  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	eero Outdoor 7 Dual Band Mesh Wi-fi Router Installation Guide
Make	eero
Language	English
Filetype	PDF (Download)
File size	0.2 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• eero

Questions and Answers (0)

If you have any questions regarding eero Outdoor 7 Dual Band Mesh Wi-fi Router Installation Guide, please ask here and describe the problem in detail.