Helmholz 700-875-LTE11, 700-875-LTE61 REX 100 Router User Guide

10 Description of LEDs and buttons  

10.1 Function and status LEDs in normal operation  

PWR Indicator light for the power supply  

RDY  

Readiness indicator (this LED must show a solid light after a max. of 110 sec.)  

CON Off: There is no active Internet or VPN connection  

Solid light: Internet connection active or possible, but VPN connection inactive  

Flashing (1.5 Hz): VPN connection is active.  

Rapid flashing (3 Hz): The router is attempting to establish a VPN connection  

USR  

Solid light: When loading default settings, firmware files, or device configurations  

Flashing (1.5 Hz): A portal configuration was recognized on the USB stick (see FCN button)  

Rapid flashing (3 Hz): A firmware file was recognized on the USB stick (see FCN button)  

10.2 RJ45 network LEDs  

LED  

WAN & LAN  

LED-color  

Green  

Orange  

LED-status  

LED on  

LED flashing  

Description  

Network connection present  

Network data traffic active  

10.3 Buttons  

FCN  

1. Function key for manually establishing the connection with the portal server.  

2. If the USR LED starts flashing, this means that you have ten seconds to press this button in order to load data from an  

inserted USB stick.  

RST  

Reset button for restarting the router  

If necessary, use the provided tool to activate the buttons (SIM card ejector).  

QuickStart Guide REX 100 | Version 14 | 22.01.2025  

24  

       

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Helmholz

Questions and Answers (0)

If you have any questions regarding Helmholz 700-875-LTE11, 700-875-LTE61 REX 100 Router User Guide, please ask here and describe the problem in detail.