Helmholz 700-875-LTE11, 700-875-LTE61 REX 100 Router User Guide

10.4 myREX24 V2 portal LEDs  

The device is not connected with the portal.  

The device has logged in at the portal and is thus online.  

Depending on the device type, the router is connected to:  

- a machine (PLC) connected on the REX  

- the website of a connected machine  

- the integrated web server of the device (router)  

The device configuration is not up to date.  

This means: the configuration of a newly created device has not yet been transferred to the device or the changed  

configuration of an existing device has not yet been transferred to the device/no synchronization has been carried  

out. This symbol can be displayed in connection with any of the symbols named above.  

Example of the visual representation of the information points on the status of the interfaces in the  

"simple view".  

11 Restoring the REX 100 router to its default settings  

In order to reset the REX 100 to the factory settings, the following steps are necessary:  

•

•

•

•

Apply a supply voltage (or press “RST”) until the PWR LED lights up.  

Wait until the RDY LED flashes.  

Press the FCN button for approx. 10–15 seconds until the USR LED flashes orange.  

After you release the FCN button, the REX 100 reboots and once again has the factory settings.  

The IP address of the REX 100 LAN interface is reset to 192.168.0.100/24.  

QuickStart Guide REX 100 | Version 14 | 22.01.2025  

25  

   

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Helmholz

Questions and Answers (0)

If you have any questions regarding Helmholz 700-875-LTE11, 700-875-LTE61 REX 100 Router User Guide, please ask here and describe the problem in detail.