Helmholz 700-875-LTE11, 700-875-LTE61 REX 100 Router User Guide

1.  

2.  

Download configuration to PC (via USB flash drive). The configuration file is saved on the PC and  

can subsequently be transferred to the REX 100 using a USB stick (subsequent procedure described  

in chapter 6.1).  

Synchronize (recommended for subsequent modifications). If the router has already been config-  

ured and a connection with the portal is established, each subsequent change to the configuration  

can be carried out via the existing VPN remote connection (further procedure described in Section  

6.2).  

3.  

Transfer configuration to the device (with LAN connection, only possible via shDIALUP). For this  

configuration option, the REX 100 must be accessible directly in the LAN from the PC. The PC  

must also be logged in on the Internet via the shDIALUP dial-up client using your myREX24 ac-  

count at the same time.  

The transfer via USB stick (point 1) is explained in this Quick Start Guide, and how retroactive changes  

can be transferred via the function “Synchronization” (Point 2).  

6.1 Transferring the configuration using a USB flash drive  

Ensure that the power supply is connected to the REX 100. Download the configuration file provided  

through the myREX24 portal to the FAT-formatted USB flash drive connected to your PC using the  

download symbol.  

The myrex24.initial configuration file must be stored in the root directory of your USB flash drive  

and may not be renamed.  

Now carry out the steps described in chapter 12 “Load configuration/ firmware update from the USB  

stick”.  

QuickStart Guide REX 100 | Version 14 | 22.01.2025  

16  

 

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• Helmholz

Questions and Answers (0)

If you have any questions regarding Helmholz 700-875-LTE11, 700-875-LTE61 REX 100 Router User Guide, please ask here and describe the problem in detail.