Home > Helmholz > Helmholz 700-875-LTE11, 700-875-LTE61 REX 100 Router User Guide

Helmholz 700-875-LTE11, 700-875-LTE61 REX 100 Router User Guide

12 Load configuration/firmware update from USB stick

To provide the REX 100 with a configuration or perform a firmware update from a USB stick, please carry

out the following steps:

•

The start process of the device must be completed (PWR & RDY LEDs light up continuously).

Save the file in the root directory of a standard FAT-formatted USB stick. Important! Do not

change the file name.

•

Insert the USB stick into the USB interface of the REX 100.

Once the USR LED starts flashing, you will have ten seconds to press the FCN button. Then hold

it pressed until the USR LED lights steadily.

•

During the operation, the voltage supply should not be interrupted.

Once the USR LED lights up continuously, you can release the FCN button, at which point the

data will be loaded from the USB stick.

•

The process is complete once the PWR and RDY LEDs light up again permanently.

Ensure that either only the firmware file or only the configuration file is found in the root directory of

the USB stick. If you wish to update both the firmware and the configuration, carry out the following

steps consecutively for each file.

Once the configuration file has been successfully transferred, the file will automatically be renamed

“Xmyrex24.mbne”, making it impossible to accidentally reuse it a second time.

The firmware and the client software „shDIALUP“ of the REX 100 can be easily updated via the website.

QuickStart Guide REX 100 | Version 14 | 22.01.2025

General	Details
Name	Helmholz 700-875-LTE11, 700-875-LTE61 REX 100 Router User Guide
Make	Helmholz
Language	English
Filetype	PDF (Download)
File size	MB

(1 votes, average: 5.00 out of 5)

Questions and Answers (0)