inhandgo CR202 InHand Networks Portable 4G Router User Manual

ICMP Detection Timeout  

ICMP Detection Retries  

Set ICMP detection timeout  

20 s  

3

Set ICMP detection max. retries  

3.2.3 LAN  

Click “Network >> LAN” to configure LAN interface of router and other devices can access to  

Internet via Ethernet cable in LAN.  

Table 3-2-3 LAN Parameters  

LAN – Static IP  

Function description: Devices in LAN use static IP to connect to network.  

Parameters  

Description  

MAC Address of router’s LAN  

gateway  

Default  

MAC Address  

Router’s LAN MAC address  

IP Address  

Netmask  

IP Address of router’s LAN gateway  

Subnet mask of LAN gateway  

Max. transmission unit, default/manual  

settings  

192.168.2.1  

255.255.255.0  

MTU  

default (1500)  

LAN Mode  

Set transport mode in LAN interface  

Auto Negotiation  

Multi-IP Settings (at most 8 additional IP addresses can be set)  

IP Address  

Set additional IP address of LAN  

Set subnet mask  

N/A  

N/A  

Subnet mask  

For recording significance of  

additional IP address  

Description  

N/A  

LAN Port Enable  

port1/port2  

Enable corresponding LAN port  

GARP  

Enable  

Disable  

Router will send ARP broadcast to  

LAN devices automatically  

Set ARP broadcast times  

Enable  

Broadcast Count  

5

Broadcast Timeout Set ARP broadcast timeout time  

10  

3.2.4 Switch WLAN Mode  

CR202 supports two types of WLAN mode: AP and STA  

Click the “Network>>Switch WLAN Mode” menu in the navigation tree to set WLAN mode of  

the router. After change and save the configuration, please reboot the device to make the  

18  

   

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• inhandgo

Questions and Answers (0)

If you have any questions regarding inhandgo CR202 InHand Networks Portable 4G Router User Manual, please ask here and describe the problem in detail.