inhandgo CR202 InHand Networks Portable 4G Router User Manual
configuration take effort.
3.2.5 WLAN Client (AP Mode)
When working in AP mode, CR202 WLAN will provide network access point for other wireless
network devices. Please sure that CR202 has already connect to Internet via WAN or cellular.
Click the “Network>>WLAN” menu in the navigation tree to enter the “WLAN" interface.
Table 3-2-5 Parameters of WLAN Access Port
WLAN
Function description: Support Wi-Fi function and provide wireless LAN access on site and
identity authentication of wireless user.
Parameters
Description
After turning on, clients can search the WLAN via SSID
name
Default
SSID broadcast
Enable
Six type for options: 802. 11g/n, 802. 11g, 802. 11n, 802.
11b, 802. 11b/g , 802. 11b/g/n
Mode
802.11b/g/n
Channel
SSID
Select the channel
11
SSID name defined by user
inhand
Support OPEN, SHARED, WEPAUTO, WPA-PSK, WPA,
WPA2-PSK, WPA2, WPA/WPA2, WPAPSK/WPA2PSK
Auth Mode
OPEN
Encryption
Method
Select encryption method of AP
NONE
20MHz
Disable
Disable
None
Bandwidth
Support 20MHz and 40MHz
Click to enable WDS, router will connect other AP to
extend wireless coverage
Enable WDS
Default Route
Bridged SSID
Click to enable Route
Set bridged SSID of other AP, support to click “Scan”
button to connect to available AP in network
Bridged BSSID Set bridged BSSID of AP
None
Auth Mode
Encryption
Method
Open type, shared type, WPA-PSK, WPA2-PSK
Open type
Support NONE, WEP
None
3.2.6 WLAN Client (STA Mode)
When working in STA mode, the router can access the Internet by connecting to other AP.
Click the “Network>>WLAN Client” menu in the navigation tree to enter the “WLAN” interface.
Select “Client” for the interface type and configure relevant parameters. (At this moment, the
19
| General | Details |
|---|---|
| Name | inhandgo CR202 InHand Networks Portable 4G Router User Manual |
| Make | inhandgo |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
If you have any questions regarding inhandgo CR202 InHand Networks Portable 4G Router User Manual, please ask here and describe the problem in detail.













