inhandgo CR202 InHand Networks Portable 4G Router User Manual

cellular interface in the "Network>>Cellular" should be closed.)  

The SSID scan function is enabled only when Client is selected as WLAN interface. Click “Scan”  

button to get all available AP and status, select AP and configure corresponding parameter to  

connect. After configure WLAN Client, please configure access type in “Network>>WAN(STA)”.  

Table 3-2-6 Parameters of WLAN Client  

WLAN Client  

Function description: Support Wi-Fi function and access to wireless LAN as client.  

Parameters  

Description  

Support multiple modes including  

802.11b/g/n  

Default  

802.11b/g/n  

Mode  

SSID  

Name of the SSID to be connected  

inhand  

Auth Mode  

Keep consistent with the access point to be Open type  

connected  

Encryption Method  

Keep consistent with the access point to be NONE  

connected  

3.2.7 IP Passthrough  

IP penetration function distributes the address obtained by WAN port to the device at the lower  

end of LAN port. When external access to the router downstream devices the router transmits data  

to the downstream device. Click "Network >>IP Passthrough" menu, then enter “IP Passthrough”  

page.  

Table 3-2-7 IP Passthrough Parameters  

IP Passthrough  

Function description: LAN port device to obtain WAN port address, used for external access to  

router downstream devices.  

Parameters  

IP Passthrough  

Description  

Enable IP Passthrough  

Select work mode（DHCP Dynamic/DHCP fix MAC) DHCP  

Dynamic  

Default  

Disable  

IP Passthrough Mode  

Fix MAC Address  

Set fix MAC address if in DHCP fix MAC mode  

00:00:00:00:0  

0:00  

2 0  

 

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• inhandgo

Questions and Answers (0)

If you have any questions regarding inhandgo CR202 InHand Networks Portable 4G Router User Manual, please ask here and describe the problem in detail.