inhandgo CR202 InHand Networks Portable 4G Router User Manual

3.1.7 Upgrade  

The upgrading process can be divided into two steps. In the first step, firmware will be written in  

backup file zone, in the second step: frimware in backup file zone will be copied to main firmware  

zone, which should be carried out during system restart. During software upgrading, any operation  

on web page is not allowed, otherwise software upgrading may be interrupted.  

From the navigation tree, select “System >> Upgrade”, then enter the “Upgrade” page.  

To upgrade the system, firstly, click <Browse> choose the upgrade file, secondly, click <Upgrade>  

and then click <OK> to begin upgrade; thirdly, upgrade firmware succeed, and click <Reboot> to  

restart the device.  

3.1.8 Reboot  

Please save the configurations before reboot, otherwise the configurations that are not saved will  

be lost after reboot.  

To reboot the system, please click the “System>>Reboot”, then click <OK>.  

3.1.9 Logout  

To logout, click “System >> Logout”, and then click <OK>.  

3.2 NETWORK  

3.2.1 CELLULAR  

Insert SIM card and dial up to achieve the wireless network connection.  

Click the “Network>>Cellular” in the navigation tree to enter Cellular configure page.  

Table3-2-1-1 Parameters of Cellular  

Cellular  

Function description: Configure parameters of PPP dialup. Generally, users only need to set  

13  

         

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• inhandgo

Questions and Answers (0)

If you have any questions regarding inhandgo CR202 InHand Networks Portable 4G Router User Manual, please ask here and describe the problem in detail.