inhandgo CR202 InHand Networks Portable 4G Router User Manual
PPPoE is a point-to-point protocol over Ethernet. User has to install a PPPoE Client on the basis
of original connection way. Through PPPoE, remote access devices could achieve the control and
charging of each accessed user.
WAN/LAN1 is working as LAN by default.
Table 3-2-2-1 Static IP Parameters of WAN
WAN - Static IP
Function description: Access to Internet via wired lines with fixed IP.
Parameters
Description
Default
Enable—Local device connected to
Router can access to the Internet via
Router.
Shared connection (NAT)
Enable
Disable—Local device connected to
Router cannot access to the Internet via
Router.
Default route
MAC Address
Enable default route
Enable
Device’s MAC
address
MAC Address of the device
IP Address
Netmask
Gateway
Set IP address of WAN
Set subnet mask of WAN
Set gateway of WAN
192.168.1.29
255. 255. 255. 0
192. 168. 1. 1
Max. transmission unit, default/manual
settings
MTU
default (1500)
Multiple IP support (at most 8 additional IP addresses can be set)
IP Address
Set additional IP address of LAN
Set subnet mask
N/A
N/A
Subnet mask
For recording significance of additional
IP address
Description
N/A
Table 3-2-2-2 Dynamic Address (DHCP) Parameters of WAN
WAN - Dynamic Address (DHCP)
Function description: Set WAN in DHCP mode to get the address allocated by other routers
automatically.
Parameters
Description
Default
Enable—Local device connected to
Router can access to the Internet via
Router.
Shared connection (NAT)
Enable
Disable—Local device connected to
Router cannot access to the Internet via
Router.
16
| General | Details |
|---|---|
| Name | inhandgo CR202 InHand Networks Portable 4G Router User Manual |
| Make | inhandgo |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
If you have any questions regarding inhandgo CR202 InHand Networks Portable 4G Router User Manual, please ask here and describe the problem in detail.













