inseego FX3100-1 Wavemaker 5G Router User Guide
IKE Phase 1
Key lifetime: The lifetime of the phase 1 key, in seconds.
Select desired items from each column. NOTE: Each phase should support at least one matching
option in each column. For example, if Phase 1 on this page is configured to support Hash SHA2 512,
SHA2 384, and SHA2 256, then at least one of those selections must be selected in Phase 2 on the next
page in order to be a common Hash.
Click Next.
IKE Phase 2
Key lifetime: The lifetime of the phase 2 key, in seconds.
Select desired items from each column. NOTE: Each phase should support at least one matching
option in each column. For example, if Phase 1 on the previous page is configured to support Hash
SHA2 512, SHA2 384, and SHA2 256, then at least one of those selections must be selected on this
page to be a common Hash.
Click Next.
Dead Peer Detection (DPD)
Dead Peer Detection (DPD) is a keep-alive method that ensures the tunnel is up and will take action if
it is not able to reach the remote side of the tunnel, depending on what DPD action you select. You
can use the default values, if desired.
Enable: Check this box to enable DPD.
DPD action: Use the drop-down to select a DPD action.
DPD delay: The number of seconds between DPD packets.
DPD timeout: The number of seconds the router will allow an IPSec session to be idle before
beginning to send DPD packets to the peer machine.
Click Next and implement your settings. The new VPN tunnel is displayed on the IPSec VPN page.
5G INDOOR ROUTER FX3100 USER GUIDE
50
GPS tab
The FX3100 incorporates a GPS receiver. The GPS receiver can determine your current location. Use
this tab to enable GPS, view current location information, and to enable GPS streaming to devices with
the GPS over Wi-Fi feature.
GPS Settings
Enable GPS: This setting enables or disables the GPS radio on your FX3100. When the ON/OFF slider is
ON, the device acquires GPS and makes GPS location data available on this page. A GPS Agreement
appears, click Confirm to proceed. When OFF, no GPS data is available.
Turn off GPS when the Device Restarts: This setting determines when the GPS receiver will turn off,
once it is on. When the ON/OFF slider is ON, the GPS receiver turns off when the FX3100is shut down.
You will need to turn it on again the next time the GPS receiver is needed.
Turn OFF GPS over Wi-Fi: GPS over Wi-Fi allows you to share location information with connected
devices. Raw GPS data is provided in the form of a National Marine Electronics Association (NMEA) text
stream. You can use third-party applications to utilize or forward the GPS data to a remote server.
When the ON/OFF slider is ON, location information is NOT shared.
Port Number: The TCP port number used to establish a connection to the FX3100 and obtain raw GPS
data for the GPS over Wi-Fi feature. Unless there is a good reason to do so, you should not change the
port number. Acceptable port values are between 1024 and 65535.
Click Save Changes to update settings.
GPS Driver
5G INDOOR ROUTER FX3100 USER GUIDE
51
| General | Details |
|---|---|
| Name | inseego FX3100-1 Wavemaker 5G Router User Guide |
| Make | inseego |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
If you have any questions regarding inseego FX3100-1 Wavemaker 5G Router User Guide, please ask here and describe the problem in detail.

inseego 5G FG2000 Router User Guide

inseego FG2000e PRO 5G Router User Guide

inseego FW2000e Wavemaker 5G Outdoor CPE Router Owner’s Manual

inseego 5G Router FG2000e User Guide

inseego 5G Router FG2000 User Guide

inseego 5G Router FX2000e User Guide

inseego FX3100 Wavemaker 5G Router User Guide

Inseego FX2000 5G Router User Guide













