inseego FX3100-1 Wavemaker 5G Router User Guide
WAN failback interval: The interval used to re-activate the priority WAN interface after the device has
failed over to a backup WAN interface. For example, if cellular WAN is your priority WAN interface, this
interval allows the device to resume use of a cellular WAN connection after it has failed over to an
Ethernet WAN interface. The interval begins when the active WAN interface has failed over to a backup
WAN interface. Once the interval expires, the device re-establishes the priority WAN interface as the
active connection. The default interval is 15 minutes.
WAN Switching Rules
When WAN automatic switching is enabled, WAN switching is determined by connectivity testing. To
turn connectivity testing off, uncheck the Active box.
WAN Interfaces
Use this table to configure Ethernet WAN ports as WAN or LAN and to set a priority for your WAN
interfaces.
WAN: The type of interface (Cellular, Ethernet1, or Ethernet2).
WAN/LAN: Although Ethernet ports are labeled as WAN or LAN on the device, you can
configure them to be either WAN or LAN. Use the drop-down to select WAN or LAN for your
Ethernet interfaces. NOTE: When IP Passthrough is turned on, you cannot configure Ethernet
ports as WAN.
Status: The status of the interface (Connected, Online, Offline).
Priority: Use the drop-down to set a priority for each WAN interface.
Click Save changes to save new settings. A pop-up appears alerting you that your FX3100 will reboot.
Click OK to restart the device.
5G INDOOR ROUTER FX3100 USER GUIDE
78
Port Filtering tab
Port Filtering allows you to block outgoing internet connections and permit only selected applications
to access the internet. Traffic is identified by port numbers. Some applications are pre-defined. You
can define additional applications if you know the details of the traffic used and generated by the
applications.
NOTE: When IP Passthrough is turned on, port filtering capabilities are set through the connected host
routing system. Settings on this page are not available. Go to Advanced > LAN to turn IP Passthrough
off.
Port Filtering Configuration
Port Filtering: To turn on port filtering, move the ON/OFF slider to ON. To turn off port filtering, so
that any application can connect to the internet, move the slider to OFF.
Applications
Select the applications you want to be able to access the internet.
5G INDOOR ROUTER FX3100 USER GUIDE
79
| General | Details |
|---|---|
| Name | inseego FX3100-1 Wavemaker 5G Router User Guide |
| Make | inseego |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding inseego FX3100-1 Wavemaker 5G Router User Guide, please ask here and describe the problem in detail.
inseego 5G FG2000 Router User Guide
inseego FG2000e PRO 5G Router User Guide
inseego FW2000e Wavemaker 5G Outdoor CPE Router Owner’s Manual
inseego 5G Router FG2000e User Guide
inseego 5G Router FG2000 User Guide
inseego 5G Router FX2000e User Guide
inseego FX3100 Wavemaker 5G Router User Guide
Inseego FX2000 5G Router User Guide
ASUS ZenWiFi XT9 AX7800 Tri Band WiFi Router User Guide
NETGEAR Nighthawk BE6500 BE5000 Dual Band Wi-Fi Router User Guide
NETGEAR AC2600 Wi-Fi Router User Guide
NETGEAR MH3150 M3 Mobile Hotspot Router Owner’s Manual
oppo AX5400 WiFi 6 Router User Guide
Tenda Wi-Fi 6 Router Installation Guide
TP-Link BE450 Dual Band Wi-Fi 7 Router Installation Guide
robustel R5020 5G WiFi Wireless Router Owner’s Manual
LANCOM SYSTEMS LANCOM 1790-4G Plus High-Performance VPN Router Instruction Manual
TAIKO AUDIO ES9039MSPRO Extreme Switch Router Instruction Manual