LANCOM SYSTEMS LANCOM 1790VAW Supervectoring Performance and WiFi Router User Guide

1

Hardware  

LANCOM 1790VAW  

Gigabit Ethernet 10/100/1000  

Power supply  

12 V DC, external power adapter (230 V); bayonet connector to secure against discon-  

nection  

Power consumption Max. 16 W  

Environment  

Housing  

Temperature range 0–40 °C; humidity 0–95 %; non-condensing  

Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock;  

measures 210 x 45 x 140 mm (W x H x D)  

VDSL / ADSL  

ETH 4  

ETH 3  

ETH 2  

ETH 1  

Config (Com)  

USB  

DC 12 V  

➀

➁

➂

➃

➄

➆

➅

Number of fans  

Interfaces  

1 quiet fan  

WAN: VDSL2  

VDSL2 as per ITU G.993.2; profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a, 35b  

VDSL Supervectoring as per ITU G.993.2 (Annex Q)  

VDSL2 vectoring as per ITU G.993.5 (G.Vector)  

➀

➁

➂

➃

➄

➀ Power  

➃ ETH  

Compatible to VDSL2 from Deutsche Telekom  

Compatible to U-R2 from Deutsche Telekom (1TR112)  

ADSL2+ over ISDN as per ITU G.992.5 Annex B/J with DPBO, ITU G.992.3, and ITU G.992.1  

ADSL2+ over POTS as per ITU G.992.5 Annex A/M with DPBO, ITU G.992.3, and ITU.G.992.1  

Supports just one virtual connection at a time in ATM (VPI-VCI pair)  

Off  

Device switched off  

Off  

No networking device attached  

Green, permanently* Device operational, resp. device  

paired / claimed and LANCOM  

Management Cloud (LMC)  

Green, permanently Connection to network device  

operational, no data traffic  

Green, flickering  

➄ WLAN  

Off  

Data transmission  

VDSL / ADSL interface  

USB interface  

You can use the USB interface to connect a USB  

printer or a USB memory stick.  

➀

➃

➄

Hardware Quick Reference  

accessible  

Use the supplied DSL cable for the IP-based line to  

connect the VDSL interface and the provider’s telephone  

socket. For more information, please contact your Internet  

service provider.  

Wi-Fi  

Frequency band: 2400-2483.5 MHz (ISM) or 5150-5825 MHz (restrictions vary bet-  

ween countries)  

Radio channels 2.4 GHz: Up to 13 channels, max. 3 non-overlapping (2.4-GHz band)  

Radio channels 5 GHz: Up to 26 non-overlapping channels (channels available vary  

according to country regulations; DFS for automatic dynamic channel selection  

required)  

Red / green blinking Configuration password not set.  

Without a configuration password,  

the configuration data in the device  

is unprotected.  

No Wi-Fi network defined or Wi-Fi  

module deactivated. The Wi-Fi  

module is not transmitting beacons.  

LANCOM 1790VAW  

Power  

After connecting the cable to the device, turn the bay-  

onet connector 90° clockwise until it clicks into place.  

Use only the supplied power adapter.  

Red blinking  

Charge or time limit reached  

Green, permanently At least one Wi-Fi network is defined  

and Wi-Fi module activated. The  

Wi-Fi module is transmitting  

Ethernet interfaces  

Use an Ethernet cable to connect one of the interfaces  

ETH 1 to ETH 4 to your PC or a LAN switch.  

➁

➂

1x green inverse  

blinking*  

Connection to the LMC active,  

pairing OK, device not claimed  

ETH  

USB  

4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch  

mode.  

Up to 3ꢀports can be operated as additional WAN ports. Ethernet ports can be electri-  

cally disabled in the LCOS configuration.  

beacons.  

2x green inverse  

blinking*  

Pairing error, resp. LMC activation  

code not available  

Green, blinking  

Red, blinking  

DFS scanning or other scan  

procedure  

USB 2.0 hi-speed host port for connecting USB printers (USB print server),  

serial devices (COM-port server) or USB drives (FAT file system)  

Configuration interface  

3x green inverse  

blinking*  

LMC not accessible, resp.  

communication error  

Hardware error in Wi-Fi module  

Use a serial configuration cable to connect the serial  

interface (COM) to the serial interface of the device  

you want to use for configuring / monitoring (separately  

available).  

Config (Com) /  

V.24  

Serial configuration interface/COM-port (8-pin mini-DIN): 9,600 - 115,200 baud,  

suitable for optional connection of analog/GPRS modems. Supports internal COM-port  

server and provides transparent asynchronous serial-data transfer via TCP.  

➁ Online  

➅ VPN  

Off  

WAN connection inactive  

Off  

VPN connection inactive  

WAN protocols  

Green, blinking  

WAN connection is established  

(e.g. PPP negotiation)  

Green, permanently VPN connection active  

VDSL, ADSL,  

Ethernet  

PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or  

without DHCP), RIP-1, RIP-2, VLAN  

Green, flashing  

VPN connecting  

Green, permanently WAN connection active  

➆ Reset  

Red, permanently  

WAN connection error  

Package content  

Cables  

1 Ethernet cable, 3 m (kiwi colored connectors);  

1 DSL cable for an IP-based line, 4.25 m  

➂ DSL  

Reset button  

Operated e.g. with a paper clip  

short press: Restart the device  

long press: Reset the device  

Off  

Interface deactivated  

Power adapter  

External power supply adapter (230 V), 12 V / 2 A DC/S; barrel / bayonet (EU),  

LANCOM item no. 111303 (not for WW devices)  

Green, permanently DSL connection active  

Green, flickering  

Red, flickering  

DSL data transfer  

DSL transfer error  

DSL hardware error  

Red / orange,  

blinking  

Orange, blinking  

DSL training  

DSL sync  

Orange,  

permanently  

Before initial startup, please make sure to take notice of the information  

regarding the intended use in the enclosed installation guide!  

Please observe the following when setting up the device  

→The power plug of the device must be freely accessible.  

Green, blinking  

DSL connecting  

i

→For devices to be operated on the desktop, please attach the adhesive rubber footpads  

→Do not rest any objects on top of the device  

Operate the device only with a professionally installed power supply at a  

nearby power socket that is freely accessible at all times.  

*) The additional power LED statuses are displayed in 5-seconds rotation if the device is configured to be managed by the LANCOM Manage-  

ment Cloud.  

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance  

with Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU  

Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc  

→Keep all ventilation slots on the side of the device clear of obstruction  

→In case of wall mounting, use the drilling template as supplied  

→Rack installation with the optional LANCOM Rack Mount (separately available)  

This product contains separate open-source software components which are subject to their own licenses, in particular the General Public  

License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License  

information“. If the respective license demands, the source files for the corresponding software components will be made available on a down-  

load server upon request.  

Cloud-ready  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	LANCOM SYSTEMS LANCOM 1790VAW Supervectoring Performance and WiFi Router User Guide
Make	LANCOM SYSTEMS
Language	English
Filetype	PDF (Download)
File size	0.08 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• LANCOM SYSTEMS

Questions and Answers (0)

If you have any questions regarding LANCOM SYSTEMS LANCOM 1790VAW Supervectoring Performance and WiFi Router User Guide, please ask here and describe the problem in detail.