Home > WavLink > WAVLINK 575A3 Dual Band WiFi Extender Repeater Access Point Router Instruction Manual

WAVLINK 575A3 Dual Band WiFi Extender Repeater Access Point Router Instruction Manual

1

2

3

4

(3.Enable the DHCP of your router.Or the repeater could not get the ip address（. If the dhcp of the

router is enabled,pls skip this step）

(4.Disable the MAC filter of your router.If you enable the mac filter in your router,the wavlink

device might be not in the white list.So it could not repeat the signal of the router.(If the mac filer

is not enabled,pls skip this step)

(5.Change the encryption of your router to WPA2,WPA1 or WPA1/WPA2 MIX.Our device does

not support WPA3.

(6.Try to repeat the 5g signal of your host router,if there is no 5G signal,you could change the

2.4g channel of your host router to 1 or 6 or 11.For 5g signal,we also suggest you should change

to channel to 36,40 or 44.Then repeat the signal again.

In some case,the congested channel might cause this problem.

(7.Try to choose bridge mode.This is main to avoid the gateway conflict.

(8.Place the repeater closer to your router,make sure you could get at less 3 bar of the signal from

the router,a strong signal from router will be easier to repeat.

4. If the internet speed from the extender is not as expected,what should I do?(In extender

mode)

Actually the device work as the wifi ranger extender,it could help help the user to get a larger wifi

coverage.But it could not increase the internet speed from the host router.And the internet speed

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	WAVLINK 575A3 Dual Band WiFi Extender Repeater Access Point Router Instruction Manual
Make	WavLink
Language	English
Filetype	PDF (Download)
File size	0.13 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Questions and Answers (0)

If you have any questions regarding WAVLINK 575A3 Dual Band WiFi Extender Repeater Access Point Router Instruction Manual, please ask here and describe the problem in detail.