logoWi-Fi Router
Instructions & User Guides
Home > mafell > mafell LO 55 Hand Router Instruction Manual

mafell LO 55 Hand Router Instruction Manual

23

6.1.1 Switching on and off (see Fig. 1)  
Danger  
•
•
Push the tool clamping lever 20 upwards to close  
it.  
Place the machine onto the base plate 14 (Fig.  
1).  
Only switch on the machine if the  
milling cutter has no contact with  
the workpiece and the tool  
Unclamping  
clamping lever has engaged.  
•
•
Set the machine to the topmost position.  
Open the tool clamping lever 20 (Fig. 3)  
completely downwards.  
If the machine is switched on when  
it is in contact with the workpiece,  
the LED display lights up red  
(steady light). The machine  
•
Place the machine on its head or put it down on  
its side.  
switches off automatically. Release  
the switch trigger, remove the  
machine from the workpiece and  
press the switch trigger again.  
•
•
Remove the milling cutter from the collet.  
Push the tool clamping lever 20 upwards to close  
it.  
•
Place the machine onto the base plate 14 (Fig.  
1).  
If the mains plug is plugged in, the working range of  
the machine is illuminated as soon as it is moved.  
A special application is at hand  
when working with guide sleeves of  
the dovetail jig (Leigh) and a comb  
jointer. If the internal diameter of  
the guide sleeve is smaller than the  
diameter of the milling cutter, the  
tool clamp must be opened as  
follows:  
When the machine is switched on, the LED display  
indicates the last speed set. The LED display lights up  
blue.  
If the LED display lights up red, there is an error (see  
chapter 8).  
Short operation  
•
Switching on: Press the switch trigger 10 (Fig.  
1).  
•
•
•
Use a Ø 6 mm round bar (see Fig. 4) and push it  
through the bore in the fan housing.  
Turn the tool clamp until the round bar engages  
and blocks the tool clamp.  
•
Switching off: Release the switch trigger.  
Continuous operation  
Use a ring wrench or open end wrench AF19 to  
open the clamping sleeve by approx. 4 turns  
(clockwise rotation, left-hand thread).  
•
Switching on: Press the switch trigger 10 (Fig.  
1) and the switch-on lock 7 in succession. The  
motor runs without pressure on the switch.  
•
•
You can now remove the milling cutter from the  
collet or insert it into the collet.  
•
Switching off: Press switch trigger 10 until the  
locking button disengages, then release the  
switch trigger.  
Re-tighten the clamping sleeve (anti-clockwise  
rotation, left-hand thread) and pull off the round  
bar.  
6.2 Motor protection  
Extreme and continuous overloading of the machine  
can lead to a motor failure. Before reaching a critical  
motor temperature, the motor is automatically switched  
off by the electronic temperature monitoring. When it is  
switched on again, the machine goes into cooling  
mode. The LED display flashes red. The bar value  
indicates the remaining cooling mode run time before  
the machine switches off automatically. When the  
6
Operation  
6.1 Initial operation  
Personnel entrusted to work with the machine must be  
made aware of the operating instructions, calling  
particular attention to the chapter "Safety instructions".  
-26-  
VIEW FULL SCREEN PDF MANUAL
GeneralDetails
Namemafell LO 55 Hand Router Instruction Manual
Makemafell
LanguageEnglish
FiletypePDF (Download)
File size2.24 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
More User Manuals

Questions and Answers (0)

If you have any questions regarding mafell LO 55 Hand Router Instruction Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

3 × 1 =

More User Manuals

mafell Instructions & User Manuals

mafell LO65EC Wood Carving Hand Router Instruction Manual
mafell LO65EC Wood Carving Hand Router Instruction Manual

mafell LO 55 Hand Router Instruction Manual
Popular

Popular User Manuals

GL iNet GL-B3000 Marble AX3000 Wireless Router User Guide
GL iNet GL-B3000 Marble AX3000 Wireless Router User Guide
EDR-G9004 Series Moxa Secure Router Installation Guide
EDR-G9004 Series Moxa Secure Router Installation Guide
TELTONIKA Networks RUTM50 Cellular 5G Router User Guide
TELTONIKA Networks RUTM50 Cellular 5G Router User Guide
TELTONIKA RUTX12 Dual Cat 6 Cellular Router Owner’s Manual
TELTONIKA RUTX12 Dual Cat 6 Cellular Router Owner’s Manual
eero 609R010111 6+ Dual-Band Mesh Wi-Fi 6 Router User Guide
eero 609R010111 6+ Dual-Band Mesh Wi-Fi 6 Router User Guide
DrayTek Vigor3910 Series Multi-WAN Security Router User Guide
DrayTek Vigor3910 Series Multi-WAN Security Router User Guide
Tenda 5G03 Wi-Fi 6 5G NR Router Installation Guide
Tenda 5G03 Wi-Fi 6 5G NR Router Installation Guide
Cudy WR1200 AC1200 Dual Band Wi-Fi Router Installation Guide
Cudy WR1200 AC1200 Dual Band Wi-Fi Router Installation Guide
TP-Link Archer A7 Wireless Dual Band Gigabit Router User Guide
TP-Link Archer A7 Wireless Dual Band Gigabit Router User Guide
Edge-core AS7926-40XKFB 100G Aggregation Router User Guide
Edge-core AS7926-40XKFB 100G Aggregation Router User Guide