logoWi-Fi Router
Instructions & User Guides
Home > mafell > mafell LO 55 Hand Router Instruction Manual

mafell LO 55 Hand Router Instruction Manual

25

The column clamping can also be deactivated, for 6.4.4 Fine adjustment of milling depth  
instance to drill rows of holes without having to  
If a delicate correction of the milling depth should  
constantly actuate the column clamping lever 18 (see  
become necessary, this is done by turning the fine  
Fig. 5). To do so, keep the column clamping lever 18  
adjustment 16 (Fig. 1). One turn of the adjusting nut  
depressed. Insert an Allen wrench (2.5 mm) into the  
causes a milling depth adjustment of 1 mm. The entire  
hexagon and turn 90° in clockwise direction.  
travel of the fine adjustment is approx. 10 mm.  
Releasing is done in reverse order.  
6.5 Work instructions  
6.4.2 Revolving depth stop  
Hold onto the machine with both  
The revolving depth stop 15 (Fig. 6) can be used to set  
hands during operation.  
three different milling depths. In addition, a fine  
adjustment of the highest and medium milling depth  
can be made via two grub screws 21.  
6.5.1 Plunge milling  
To prevent a misadjustment of the milling depth in case  
A reduction plate reducing the tool opening to Ø 32 mm  
of an accidental actuation of the column clamping lever  
is mounted on the underside of the base plate 14 (Fig.  
18 (Fig. 1), the depth stop can be hooked into the  
1). The reduction plate facilitates machining in angular  
revolving depth stop:  
wooden areas and reduces the risk of slipping.  
•
•
•
First move the revolving depth stop 15 all the way  
to the left.  
If necessary, the reduction plate can be removed to the  
top.  
During milling ensure that the workpiece is secured  
and the router is resting evenly against the workpiece  
with the base plate 14 and / or the limit stops on an as  
large as possible surface.  
Then turn the revolving depth stop 15 in anti-  
clockwise direction.  
Now hook in the bar of the depth stop 1 (Fig. 1)  
by turning the revolving depth stop 15 in  
clockwise direction.  
Mill large depths progressively.  
Once you have set the milling cutter speed, firmly hold  
onto the machine with both hands and switch on the  
machine. Actuate the column clamping lever 18 (Fig.  
2) and plunge the milling cutter into the material up to  
the stop with an even feed. Releasing the column  
clamping lever 18 locks the machine. Only mill in  
counter direction.  
6.4.3 Adjustment of milling depth according to  
scale  
The milling depth is set via the scale 3 (Fig. 1) for the  
depth stop.  
•
•
•
Clamp the milling cutter and place the machine  
onto the workpiece.  
Actuate the column clamping lever 18 (Fig. 2)  
and keep it depressed.  
6.5.2 Milling with parallel guide fence  
The parallel guide fence is used to accurately guide the  
machine along a straight workpiece edge (see Fig. 7).  
The parallel guide fence is included in the scope of  
supply.  
Move the machine downwards until the milling  
cutter touches the workpiece surface. Now  
release the column clamping lever 18.  
•
•
Open the cam lever 17 (Fig. 1).  
Conversion:  
Adjust depth stop 1 up to the stop screw on the  
revolving depth stop 15.  
•
•
Push the guide rods 22 into the two openings of  
the base plate.  
•
•
•
Set the slidable scale needle on the depth stop 1  
to the zero point of scale 3.  
Roughly set the parallel guide fence to the  
desired distance to the milling cutter and tighten  
the wing screws 23.  
Set the depth stop 1 to the desired milling depth  
and clamp it with the cam lever 17.  
•
Use knurled screw 24 to accurately set the  
distance to the milling cutter and then tighten the  
wing screws 25.  
Actuate the column clamping lever 18 (Fig. 2) to  
actuate a reverse stroke.  
-28-  
VIEW FULL SCREEN PDF MANUAL
GeneralDetails
Namemafell LO 55 Hand Router Instruction Manual
Makemafell
LanguageEnglish
FiletypePDF (Download)
File size2.24 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
More User Manuals

Questions and Answers (0)

If you have any questions regarding mafell LO 55 Hand Router Instruction Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

five × 3 =

More User Manuals

mafell Instructions & User Manuals

mafell LO65EC Wood Carving Hand Router Instruction Manual
mafell LO65EC Wood Carving Hand Router Instruction Manual

mafell LO 55 Hand Router Instruction Manual
Popular

Popular User Manuals

rock space RSD0616 AX1800 Wi-Fi 6 WiFi Router Installation Guide
rock space RSD0616 AX1800 Wi-Fi 6 WiFi Router Installation Guide
ZYXEL NR5103EV2 5G NR Router User Guide
ZYXEL NR5103EV2 5G NR Router User Guide
GL Technologies 2AFIW-X2000 Wi-Fi 6 4G LTE CAT 12 Router User Guide
GL Technologies 2AFIW-X2000 Wi-Fi 6 4G LTE CAT 12 Router User Guide
TP-Link EC223-G5 Aginet AC1200 MU-MIMO Wi-Fi Router User Manual
TP-Link EC223-G5 Aginet AC1200 MU-MIMO Wi-Fi Router User Manual
GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
AIRCONNECT BEC 8231 5G CBRS Outdoor Router Owner’s Manual
AIRCONNECT BEC 8231 5G CBRS Outdoor Router Owner’s Manual
AT T MF985 Velocity 2 WiFi Hotspot Router Instruction Manual
AT T MF985 Velocity 2 WiFi Hotspot Router Instruction Manual
LANCOM 1790VA-4G Router User Guide
LANCOM 1790VA-4G Router User Guide
HNK RAX1810 Smart Wi-Fi Router User Manual
HNK RAX1810 Smart Wi-Fi Router User Manual
LINOVISION IOT-R32 Wholesale Rugged and Versatile Cellular Router User Guide
LINOVISION IOT-R32 Wholesale Rugged and Versatile Cellular Router User Guide