logoWi-Fi Router
Instructions & User Guides
Home > mafell > mafell LO 55 Hand Router Instruction Manual

mafell LO 55 Hand Router Instruction Manual

24

machine has switched off, the LED display lights up the machine is switched on, the LED display indicates  
red. the last speed set.  
The machine is switched off due to overtemperature if Which electronic level must be set for which milling  
the permissible motor temperature is exceeded while cutter Ø and material can be gathered from the  
processing a workpiece. The LED display lights up red. following table.  
When it is switched on again, the machine goes into  
cooling mode.  
As an alternative, you can allow the machine to cool  
while it is switched off.  
Material  
(Recommended  
cutting)  
Milling  
Milling  
Milling  
cutter Ø cutter Ø cutter Ø  
3 – 14  
mm  
15 – 25 26 – 35  
mm  
mm  
Hardwood  
(TCT / HSS)  
Softwood  
(HSS / TCT)  
Coated chip  
board  
6 - 4  
6 - 5  
6 - 5  
5 - 3  
3 - 1  
6.3 Speed adjustment  
The router is equipped with an electronic speed control  
(see Fig. 1).  
6 - 3  
6 - 3  
4 - 1  
4 - 2  
Speed normal operation  
The milling cutter speed can be adjusted in 6 levels  
between 10000 and 24000 rpm via the speed button 5  
(Fig. 1) below the LED display. When the machine is  
switched on with a soft start, the speed increases to  
the set final speed. The electronic levels are depicted  
in the following figure.  
(TCT)  
Plastic  
(TCT)  
Danger  
Do not work with the LO 55 if the  
electronic system is defective, as  
this may lead to excessive speeds.  
A faulty electronic system can be  
recognised by the lacking soft start,  
by a heightened idling noise or if no  
speed control is possible.  
Speed cooling mode  
Speed setting  
If the machine is in cooling mode, the speed is  
automatically reduced to 8000 rpm.  
(1) Normal operation  
(2) Throttled operation  
(3) Cooling run  
Irrespective of the previously set speed, the spindle  
speed remains constantly at 8000 rpm.  
The machine switches off when cooling mode is  
complete. When the machine is switched on again, it  
continues to run in normal operation.  
Speed throttled operation  
When processing end-grained wood surfaces, the  
speed can be lowered by 30%. To do so, press the  
speed reduction button 6 (Fig. 1). The LED display  
then flashes blue. The speed reduction is reset by  
pressing the speed reduction button again; the  
machine runs in normal operation again.  
After a disconnection from the mains, the speed  
reduction is reset; the machine runs in normal  
operation again. The LED display lights up blue. When  
6.4 Milling depth adjustment  
6.4.1 Column clamping  
The machine is equipped with a permanent column  
clamping.  
By actuating the column clamping lever 18 (Fig. 2), the  
clamping is released and you can adjust the machine  
height.  
Releasing the column clamping lever reactivates the  
clamping.  
-27-  
VIEW FULL SCREEN PDF MANUAL
GeneralDetails
Namemafell LO 55 Hand Router Instruction Manual
Makemafell
LanguageEnglish
FiletypePDF (Download)
File size2.24 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
More User Manuals

Questions and Answers (0)

If you have any questions regarding mafell LO 55 Hand Router Instruction Manual, please ask here and describe the problem in detail.

Leave a Reply

Your email address will not be published. Required fields are marked *

5 × 4 =

More User Manuals

mafell Instructions & User Manuals

mafell LO65EC Wood Carving Hand Router Instruction Manual
mafell LO65EC Wood Carving Hand Router Instruction Manual

mafell LO 55 Hand Router Instruction Manual
Popular

Popular User Manuals

FiberHome SR1021Y Wireless Router User Manual
FiberHome SR1021Y Wireless Router User Manual
EDiMAX EW-7489WAX Wireless Router Installation Guide
EDiMAX EW-7489WAX Wireless Router Installation Guide
MikroTik RBcAPGi-5acD2nD-XL Wireless Router User Guide
MikroTik RBcAPGi-5acD2nD-XL Wireless Router User Guide
TP-Link Archer AX53 Dual Band Wi-Fi 6 Router Installation Guide
TP-Link Archer AX53 Dual Band Wi-Fi 6 Router Installation Guide
KEENETIC KN-3911 Mesh Wi-Fi 6 Multi-Gigabit Router User Guide
KEENETIC KN-3911 Mesh Wi-Fi 6 Multi-Gigabit Router User Guide
TELTONIKA RUTX14 CAT12 Cellular IoT Router User Guide
TELTONIKA RUTX14 CAT12 Cellular IoT Router User Guide
STARLINK Mini Kit Dish With Router User Guide
STARLINK Mini Kit Dish With Router User Guide
REGIN M4G951 Router Instructions
REGIN M4G951 Router Instructions
WM Systems M2M LTE Cat.4 Router Installation Guide
WM Systems M2M LTE Cat.4 Router Installation Guide
QUARK-ELEC QK-R041 Wireless 4G LTE Router User Guide
QUARK-ELEC QK-R041 Wireless 4G LTE Router User Guide