×
- 1. Installation (Setup → Configuration)
- 2. We Appreciate Your Trust And Preference For Purchasing One Of Our Devices, We Are Sure That You Will Obtain Great Benefits.
- 3. Legal Information (Limitation Of Liability)
- 4. Know The Product (Instruction And Operations → Sim Installation → Battery Charging → Turn On Your Hotspot Hs2 → Internet Connection → Change Ssid And Password)
- 5. Get To Know The Product (Package Content → Warning: Use Only Accessories And Devices Approved By Quamtum Connectivity De Sa De Cv)
- 6. Product Diagram (General Specifications → Led Indicators → Device Case → Power Button → Usb Connector → Wps Button)
- 7. Led Indicators (G(lte) Indicator → Message → Battery → Wi-fi)
- 8. Sim Card Installation (Battery Charge)
- 9. Turn On Your Hotspot (Internet Connection → Logging In To The Web Administration Page)
- 10. Configure Your Wi-fi Network (Manage Connected Devices → Access Your Statistics → Status Information Section → Usb Connection)
- 11. Press To Start The Installation: Choose The Path Where The Hotspot Hs2 Program Will Be Installed, As Well As Its Shortcut On The Desktop Of …
- 12. Once The Installation Process Is Complete, Confirm The Path In The Program Has Been Installed And Press That.
- 13. When Installing The Driver It Will Allow The Connection Of Router Portable Wireless (lte) And Internet Use Through The Port Usb.
- 14. Restore Factory Settings (Hold Down The Reset Button Until The Device Reboots → Through The Web Manager → Connect Your Portable Wireless (lte) Router → Enter The Following Ip Address: 192.168.8.1 → Enter The Default Credentials)
- 15. Factory Reset
- 16. Changingssidandpassword (Locatenetworkname(ssid) → Logintothewebui → Defaultcredentials → Managementip → Webuser → Webpassword)
- 17. Now, Inside The Web Manager, Go To Fi
- 18. Enter Your Preferred Network Name And Password. Press The Apply Button. Devices Previously Connected To Your Network Will Ask You To Enter T…
- 19. Establish Wireless Connection (Connect To The Network → Management Ip Configuration → Web User And Password Setup)
- 20. Establishwpsconnection (To Connect Using The Wps Connection Please Follow The Steps Below: → Turnonthedevicethatneedstobeconnected → Activate Thewpsfunctionontheterminaltobecconnected → Pressandholdthewpsbuttonofyourportablewirelessrouter(lte)devicefor3seconds)
- 21. Use Of The Interface (Access To The Web Administrator → Main Screen)
- 22. Within This Interface We Can See Information Related To Imei, Serial Number (s/n), Imsi, Service Provider, Type Of Network, Signal Reception…
- 23. Messages (Contacts)
- 24. Advanced Configuration (Energy Saving → Wifi Waiting Time)
- 25. Quick Setup (Configure Basic Parameters → Network Name → Password → Apply Button → Advanced Options)
- 26. Battery Care
- 27. Notes (Radio → On Use With Children)
- 28. Product Disposal (Declaration Of Environmental Protection)
- 29. Applicable Environment (Electrical Specifications → Use Of The Radioelectric Spectrum)
- 30. Frequently Asked Questions (Low Signal Or No 4g Signal → It Does Not Recognize The Sim Card → The Equipment Does Not Have Internet)
- 31. Imei Location
- 32. The Quamtum Hotspot Hs2 Product Complies With Part 15 The Us Federal Communications Commission (fcc) Rules. Its Operation Is Subject To The …
- 33. $5 Phdvxuhphqw Uhvxowv ($5 9doxh → Rvlwlrq → Fdohg → &rqgxfwhg 7xqhꢇxs → Rzhu → Rgh)
- 34. Installation (Setup → Configuration → Power Mode → Test Channel → Data Plot → Front)
- 35. Installation (Setup → Configuration → Power → Test → Troubleshooting → Maintenance)
- 36. Installation Instructions (Configuration Settings → Setup Requirements → Troubleshooting Guide → Safety Precautions → User Guidelines → Maintenance Procedures)
- 37. Installation (Configuration → Setup → Troubleshooting → Power Requirements → Safety Information → Maintenance)
- 38. Installation (Setup → Configuration → Power Requirements → Test Results → Troubleshooting → Maintenance)
- 39. Installation (Setup → Configuration → Testing → Power → Warning → Reference)
- 40. Installation (Setup → Configuration → Testing → Power → Warning → Positioning)
- 41. Installation Instructions (Compliance Information → Interference Mitigation Measures → Equipment Testing And Compliance → User Authority And Modifications)
×
Quamtum HS2 HotSpot Wireless Portable Router User Manual
LED indicators
No.
1
Icon
Description
1. 4G(LTE) indicator
Green: Connected to the 4G network.
Blue: Connected in data roaming mode. Red: No
signal or
SIM card not recognized.
2
3
2. Message
Intermittent
Flashing: New message
3. Battery
Green: Battery over 70% Red: Low
battery Flashing:
Battery is charging
Intermittent
4. Wi-Fi
4
Blue: Wi-Fi access point enabled Flashing: WPS
active
Intermittent
7
| General | Details |
|---|---|
| Name | Quamtum HS2 HotSpot Wireless Portable Router User Manual |
| Make | Quamtum |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.6 MB |
If you have any questions regarding Quamtum HS2 HotSpot Wireless Portable Router User Manual, please ask here and describe the problem in detail.


xiaomi CB0401 5G CPE Pro Router Instructions

Siretta QUARTZ-ONYX 5G NR Router User Guide

eero Pro 6E Mesh Router User Guide

D-Link DIR-2660 AC2600 Mesh Wifi Router Installation Guide

GL iNet GL-B2200 Tri-Band Wireless Gigabit Router User Manual

WIS HOME WIS-AC1200 WiFi Router User Guide

Edge-core AS7926-40XKFB 100G Aggregation Router User Guide

UfiSpace S9600-64X 100G Aggregation Router Installation Guide

peplink MAX Transit Pro Router User Manual

ASUS AC1750 WiFi Dual Band Wireless Internet Router User Guide
Table of Contents
- 1. Installation - Setup →
- 2. We Appreciate Your Trust And Preference For Purchasing One O... →
- 3. Legal Information - Limitation Of Liability →
- 4. Know The Product - Instruction And Operations →
- 5. Get To Know The Product - Package Content →
- 6. Product Diagram - General Specifications →
- 7. Led Indicators - G(lte) Indicator →
- 8. Sim Card Installation - Battery Charge →
- 9. Turn On Your Hotspot - Internet Connection →
- 10. Configure Your Wi-fi Network - Manage Connected Devices →
- 11. Press To Start The Installation: Choose The Path Where The H... →
- 12. Once The Installation Process Is Complete, Confirm The Path ... →
- 13. When Installing The Driver It Will Allow The Connection Of R... →
- 14. Restore Factory Settings - Hold Down The Reset Button Until ... →
- 15. Factory Reset →
- 16. Changingssidandpassw... - Locatenetworkname(ss... →
- 17. Now, Inside The Web Manager, Go To Fi →
- 18. Enter Your Preferred Network Name And Password. Press The Ap... →
- 19. Establish Wireless Connection - Connect To The Network →
- 20. Establishwpsconnection - To Connect Using The Wps Connection... →
- 21. Use Of The Interface - Access To The Web Administrator →
- 22. Within This Interface We Can See Information Related To Imei... →
- 23. Messages - Contacts →
- 24. Advanced Configuration - Energy Saving →
- 25. Quick Setup - Configure Basic Parameters →
- 26. Battery Care →
- 27. Notes - Radio →
- 28. Product Disposal - Declaration Of Environmental Protection →
- 29. Applicable Environment - Electrical Specifications →
- 30. Frequently Asked Questions - Low Signal Or No 4g Signal →
- 31. Imei Location →
- 32. The Quamtum Hotspot Hs2 Product Complies With Part 15 The Us... →
- 33. $5 Phdvxuhphqw Uhvxowv - $5 9doxh →
- 34. Installation - Setup →
- 35. Installation - Setup →
- 36. Installation Instructions - Configuration Settings →
- 37. Installation - Configuration →
- 38. Installation - Setup →
- 39. Installation - Setup →
- 40. Installation - Setup →
- 41. Installation Instructions - Compliance Information →












































