×
- 1. Ax1800 Dual-band Wi-fi 6 Router (Installation → Setup → Configuration → Network Settings → Troubleshooting → Safety Information)
- 2. About This Guide (Connect The Hardware → Log In To Your Router → Set Up Internet Connection → Use Quick Setup Wizard → Manually Set Up Your Internet Connection → Set Up The Router As An Access Point)
- 3. Maximum Wireless Signal Rates (Use Of 802.11ax (wi-fi 6) → Standardized Modifications To Ieee 802.11 → ,000 Mbps Internet Speeds → Use Of Wpa3 → Router Compatibility With Ieee 802.11ax)
- 4. Get To Know About Your Router (Product Overview → Appearance → Top Panel)
- 5. Get To Know About Your Router (The Back Panel → Button And Port Explanation)
- 6. Get To Know About Your Router (Reset Button → Wps/wi-fi Button → Antennas)
- 7. Connect The Hardware (Position Your Router → Connect Your Router)
- 8. Connect The Hardware (Position Your Router → Connect Your Router)
- 9. Connect The Hardware (Method 1: Wired → Method 2: Wirelessly → Method 3: Use The Wps Button)
- 10. Log In To Your Router
- 11. Log In To Your Router (Set Up The Tcp/ip Protocol → Visit Http://tplinkwifi.net → Create A Login Password → Refer To The Faq Section → Tp-link Id And Cloud Router Login)
- 12. Set Up Internet Connection (Use Quick Setup Wizard → Quick Setup Via Tp-link Tether App → Manually Set Up Your Internet Connection → Set Up The Router As An Access Point → Set Up An Ipv6 Internet Connection)
- 13. Set Up Internet Connection (Use Quick Setup Wizard → Set Up An Ipv6 Internet Connection → Quick Setup Via Tp-link Tether App → Tp-link Cloud Service)
- 14. Set Up Internet Connection (Manually Set Up Your Internet Connection → Connect Your Device To The Routers Wireless Network → Log In With Your Tp-link Id → Modify Internet Connection Settings → Select Your Internet Connection Type → Follow The Instructions On The Page)
- 15. Set Up Internet Connection (Static Ip → Pppoe)
- 16. Set Up Internet Connection (Secondary Connection → Dynamic Ip And Pppoe Configuration → Advanced Network Configuration → Faq Section)
- 17. Set Up Internet Connection (Set Up The Router As An Access Point → Set Up An Ipv6 Internet Connection)
- 18. Set Up Internet Connection (Enable Ipv6 → Fill In Information As Required By Different Connection Types → Static Ip → Dynamic Ip(slaac/dhcpv6) → Pppoe)
- 19. Set Up Internet Connection (Manually Set Up Your Internet Connection → To4 Tunnel → Pass-through (bridge))
- 20. Set Up Internet Connection (Configure Lan Ports → Check Ipv6 Connection → Visit The Faq Section)
- 21. Register A Tp-link Id (Change Your Tp-link Id Information → Manage The User Tp-link Ids → Manage The Router Via The Tp-link Tether App)
- 22. Register A Tp-link Id (Change Your Tp-link Id Information)
- 23. Tp-link Cloud Service (Manage The User Tp-link Ids)
- 24. Tp-link Cloud Service (Add Tp-link Id To Manage The Router → Remove Tp-link Id(s) From Managing The Router)
- 25. Manage The Router Via The Tp-link Tether App (Launch The Apple App Store Or Google Play Store → Connect Your Device To The Routers Wireless Network → Log In With Your Tp-link Id → Register A Tp-link Id)
- 26. Guest Network (Create A Network For Guests → Customize Guest Network Options)
- 27. Create A Network For Guests (Warning → Customize The Ssid → Select The Security Type)
- 28. Guest Network (Customize Guest Network Options)
- 29. Guest Network (Allow Guests To Access Your Local Network)
- 30. Usb Settings (Access The Usb Storage Device → Media Sharing → Time Machine)
- 31. Usb Settings (Access The Usb Storage Device → Access The Usb Device Locally)
- 32. Usb Settings (Access The Usb Device Remotely → To Set Up Authentication For Data Security → To Customize The Address Of The Usb Storage Device)
- 33. Usb Settings (Configure Remote Access Settings → Internet Ftp → Save)
- 34. Usb Settings (Set Up Authentication For Data Security → Customize The Access Settings → Access With The Username And Password → Set Up A Dynamic Dns Service Account → Customize The Address Of The Usb Storage Device → Use A Third-party App For Network Files Management)
- 35. Usb Settings (To Only Share Specific Content → To Set Up Authentication For Data Security)
- 36. Usb Settings (Media Sharing)
- 37. Usb Settings (Time Machine)
- 38. Usbsettings (Timemachine → Sizelimitforbackups → Save)
- 39. Parental Controls (Setting Up Access Restrictions → Monitoring Internet Usage)
- 40. Parental Controls (Setting Up Access Restrictions → Blocked Content)
- 41. Parental Controls (Set Time Restrictions On Internet Access)
- 42. Parental Controls (Monitoring Internet Usage → Setting Up Access Restrictions)
- 43. Parentalcontrols
- 44. Qos
- 45. Enableqosandsetbandwidthallocation (Go Toadvanced>qos>globalsettings → Ticktoenableqos → Inputthemaximumuploadanddownloadbandwidth → Clicksave → In Thedeviceprioritysection → Toggleonpriority)
- 46. Set Up A Onemesh Network (Manage Devices In The Onemesh Network)
- 47. Onemesh With Seamless Roaming (Same Network Name & Password → Internet → Unified Wi-fi Network → Seamless Roaming → Easy Setup And Management → Set Up A Onemesh Network)
- 48. Onemesh With Seamless Roaming (Connect A Onemesh Extender To This Router → Check Full List Of Tp-link Onemesh Devices → Set Up The Extender To Join The Onemesh Network → Find It In The Available Onemesh Devices List → Click Add To Add It To The Onemesh Network → Router And Extender Successfully Form A Onemesh Network!)
- 49. Onemesh With Seamless Roaming (Manage Devices In The Onemesh Network → View Mesh Devices And Connected Clients → Manage A Onemesh Device In The Network)
- 50. Onemesh With Seamless Roaming (Manage The Onemesh Device As Needed → Change Device Information → Click Manage Device To Redirect To The Web Management Page Of This Device → Click Leave Onemesh To Delete This Device From The Onemesh Network)
- 51. Protect The Network From Cyber Attacks (Access Control → Ip & Mac Binding)
- 52. Protect The Network From Cyber Attacks (Access Control)
- 53. Network Security (Allow Specific Device(s) → Add Connected Devices)
- 54. Network Security (Add Unconnected Devices → Ip & Mac Binding)
- 55. Network Security (Ip & Mac Binding → Bind Your Device(s) According To Your Need)
- 56. Network Security
- 57. Sharelocalresourcesontheinternetbyportforwarding (Openportsdynamicallybyporttriggering → Makeapplicationsfreefromportrestrictionbydmz → Makexboxonlinegamesrunsmoothlybyupnp)
- 58. Nat Forwarding (Share Local Resources On The Internet By Port Forwarding → Assign A Static Ip Address To Your Pc → Visit Http://tplinkwifi.net → Go To Advanced > Nat Forwarding > Port Forwarding)
- 59. Nat Forwarding (View Common Services → View Connected Devices → Device Ip Address → Save → Tips)
- 60. Nat Forwarding (Set Up A Dynamic Dns Service Account → Open Ports Dynamically By Port Triggering → Configure The Port Triggering Rules)
- 61. Natforwarding (Makeapplicationsfreefromportrestrictionbydmz → Tips)
- 62. Nat Forwarding (Assign A Static Ip Address To Your Pc → Enable Dmz → Make Xbox Online Games Run Smoothly By Upnp)
- 63. Nat Forwarding (Upnp)
- 64. Vpn Server (Use Openvpn To Access Your Home Network → Use Pptp Vpn To Access Your Home Network)
- 65. Useopenvpntoaccessyourhomenetwork (Setupopenvpnserveronyourrouter → Configuredynamicdnsservice → Generateacertificate → Selectservicetype → Entervpnserviceport → Entervpnsubnetnetmask)
- 66. Vpn Server (Configure Openvpn Connection On Your Remote Device → Use Pptp Vpn To Access Your Home Network → Set Up Pptp Vpn Server On Your Router)
- 67. Vpn Server (Enable Pptp → Dynamic Dns Service → Client Ip Address → Pptp Connection Permission → Save → Pptp Vpn Connection Account)
- 68. Vpn Server (Configure Pptp Vpn Connection On Your Remote Device → Set Up A New Connection Or Network → Connect To A Workplace)
- 69. Vpn Server
- 70. Vpn Server
- 71. Vpn Server
- 72. Customizeyournetworksettings (Change Thelansettings → Configuretosupportiptvservice → Specifydhcpserversettings → Setupadynamicdnsserviceaccount → Createstaticroutes → Specifywirelesssettings)
- 73. Change Thelansettings (Configuretosupportiptvservice)
- 74. Customizeyournetworksettings (Enableiptv/vlan → Selecttheappropriatemode → Selectbridgeifyourispisnotlisted → Selectcustomifyourispisnotlistedbutprovidesnecessaryparameters → Clicksave → Connecttheset-topboxtothecorrespondinglanport)
- 75. Customizeyournetworksettings (Specifydhcpserversettings → Visithttp://tplinkwifi.net → Go Toadvanced>network>dhcpserver → Tospecifytheipaddress → Toreserveanipaddressforaspecifiedclientdevice)
- 76. Customizeyournetworksettings (Setupadynamicdnsserviceaccount)
- 77. Customizeyournetworksettings (Createstaticroutes)
- 78. Customize Your Network Settings (Change The Routers Lan Ip Addresses → Disable Router Bs Dhcp Function → Visit Http://tplinkwifi.net → Log In With Your Tp-link Id → Go To Advanced > Network > Routing → Click Add And Finish The Settings)
- 79. Customizeyournetworksettings (Subnetmask → Defaultgateway → Interface → Description → Specifywirelesssettings)
- 80. Customizeyournetworksettings (Enableordisablewirelessfunction → Changewirelessnetworkname(ssid)andwirelesspassword → Hidessid → Usesmartconnectfunction)
- 81. Customizeyournetworksettings (Changethesecurityoption → Wpawpa2personalorwpawpa2enterprise → Wpa2wpa3personal → Transmitpower → Channelwidth → Channel)
- 82. Customizeyournetworksettings (Scheduleyourwirelessfunction)
- 83. Customizeyournetworksettings (Usewpsforwirelessconnection → Connectviatheclientspin → Connectviatherouterspin)
- 84. Customizeyournetworksettings (Pushthewpsbutton → Advancedwirelesssettings)
- 85. Customizeyournetworksettings (Wmm → Shortgi → Apisolation → Airtimefairness → Beaconinterval → Rtsthreshold)
- 86. Manage The Router (Upgrade The Firmware → Backup And Restore Configuration Settings → Change The Login Password → Password Recovery → Local Management → Remote Management)
- 87. Manage The Router (Upgrade The Firmware → Online Upgrade)
- 88. Manage The Router (Local Upgrade → Backup And Restore Configuration Settings)
- 89. Manage The Router (Restore Configuration Settings → Reset The Router Except Your Login Password And Tp-link Id → Reset The Router To Factory Default Settings)
- 90. Change The Login Password (Password Recovery)
- 91. Manage The Router (Local Management)
- 92. Manage The Router (Allow All Lan Connected Devices To Manage The Router → Allow Specific Devices To Manage The Router)
- 93. Manage The Router (Remote Management)
- 94. Manage The Router (Set Up A Dynamic Dns Service Account → Remote Management → System Log)
- 95. Manage The Router (Save Log → Send The System Log To A Mailbox)
- 96. Manage The Router (Test The Network Connectivity)
- 97. Manage The Router (Diagnostics → Ping → Traceroute → Ip Address Or Domain Name → Ping Count → Ping Packet Size)
- 98. Manage The Router (Set Up System Time → Get Time From The Internet)
- 99. Manage The Router (Set Time → Get From Managing Device → Manually Set The Date And Time → Set Up Daylight Saving Time)
- 100. Manage The Router (Set The Router To Reboot Regularly → Reboot Schedule)
- 101. Manage The Router (Control The Led → Night Mode → Led Control)
- 102. Wireless Password Recovery (Web Management Password Reset → Router Reset Instructions → Logging Into The Router's Web Management Page → Ip Address Configuration → Network Settings Verification)
- 103. Lan Settings (Advanced → Restore Advanced Settings)
- 104. Reset The Router To Factory Default Settings (Reconfigure The Router To Surf The Internet → Check Internet Status → Manually Configure The Dns Server → Enter 8.8.8.8 As Primary Dns)
- 105. Restart The Modem And The Router (Reset The Router To Factory Default Settings And Reconfigure The Router → Upgrade The Firmware Of The Router → Check The Tcp/ip Settings On The Particular Device → Make Sure The Physical Connection Between The Router And The Modem Is Proper → Clone The Mac Address Of Your Computer)
- 106. Visit Http://tplinkwifi.net, And Log In With Your Tp-link Id Or The Password You Set For The Router.
- 107. Power Off Your Modem And Router (Confirm Your Internet Connection Type → Visit Http://tplinkwifi.net → Select Your Internet Connection Type → Click Save → Restart The Modem And The Router Again → Please Upgrade The Firmware Of The Router)
- 108. Make Sure The Wireless Adapter Driver Is Installed Successfully And The Wireless Adapter Is Enabled. (On Windows 7 → On Windows Xp → Check The Wlan Led Indicator On Your Wireless Router/modem. → Make Sure Your Computer/device Is Still In The Range Of Your Router/modem. → Go To Wireless Or Advanced > Wireless > Wireless Settings.)
- 109. Check The Wireless Signal Strength Of Your Network (Change The Wireless Channel Of The Router → Re-install Or Update The Driver For Your Wireless Adapter)
- 110. Fcc Rf Radiation Exposure Statement (Compliance With Fcc Rf Exposure Requirements → Equipment Compliance Information Statement → Product Information → Installation And Use Instructions → Contact Information)
- 111. Caution (Radiation Exposure Statement → Industry Canada Statement → Korea Warning Statements → Ncc Notice & Bsmi Notice)
- 112. Safety Information (Explanations Of The Symbols On The Product Label → Recycling)
×
TP-Link Archer AX20 AX1800 WiFi 6 WiFi Router User Guide
Chapter 12
VPN Server
6. Select your Client Access type. Select Home Network Only if you only want the
remote device to access your home network; select Internet and Home Network if
you also want the remote device to access internet through the VPN Server.
7. Click SAVE.
8. Click GENERATE to get a new certificate.
Note: If you have already generated one, please skip this step, or click GENERATE to update the certificate.
9. Click EXPORT to save the OpenVPN configuration file which will be used by the
remote device to access your router.
Step 2. Configure OpenVPN Connection on Your Remote Device
1. Visit http://openvpn.net/index.php/download/community-downloads.html to
download the OpenVPN software, and install it on your device where you want to
run the OpenVPN client utility.
Note: You need to install the OpenVPN client utility on each device that you plan to apply the VPN function to access
your router. Mobile devices should download a third-party app from Google Play or Apple App Store.
2. After the installation, copy the file exported from your router to the OpenVPN client
utility’s “config” folder (for example, C:\Program Files\OpenVPN\config on Windows).
The path depends on where the OpenVPN client utility is installed.
3. Run the OpenVPN client utility and connect it to OpenVPN Server.
12. 2. Use PPTP VPN to Access Your Home Network
PPTP VPN Server is used to create a VPN connection for remote device. To use the VPN
feature, you should enable PPTP VPN Server on your router, and configure the PPTP
connection on the remote device. Please follow the steps below to set up a PPTP VPN
connection.
Step 1. Set up PPTP VPN Server on Your Router
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
66
| General | Details |
|---|---|
| Name | TP-Link Archer AX20 AX1800 WiFi 6 WiFi Router User Guide |
| Make | TP-Link |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.24 MB |
If you have any questions regarding TP-Link Archer AX20 AX1800 WiFi 6 WiFi Router User Guide, please ask here and describe the problem in detail.

TP-Link VR300 Archer Modem Router User Guide

TP-Link T150500-2-DT WiFi Router Instruction Manual

TP-Link Archer AX55 Wi-Fi 6 Router Installation Guide

TP-Link Omada ER8411 VPN Router Instructions

TP-Link Configure VDSL Router User Guide

TP-Link Archer BE805 BE19000 Tri-Band Wi-Fi 7 Router User Manual

TP-Link AX6000 8-Stream Wi-Fi 6 Router Installation Guide

TP-Link VR600 Wireless DSL Modem Router Installation Guide

TP-Link AX58 Dual Band Gigabit Wi-Fi 6 Router Installation Guide

TP-Link AC750 Wireless Dual Band Router Owner’s Manual


NETGEAR RBE971SB Quad Band WiFi 7 Mesh Router Instructions

TANGERINE Inseego FX2000 Wavemaker 5G Router User Guide

dahua DH-MAX18-3 MAX18 Mesh Wireless Router User Guide

TP-Link BE220_V1 Dual Band Wi-Fi 7 Router Installation Guide

SERCOMM RP582B Router or Extender User Manual

Helmholz LTE11 Router Owner’s Manual

xiaomi RA67 AX1800 Mi Router User Manual

BIGXI AX1800 Wireless Router Installation Guide

TP-Link Archer MR400 4G LTE 300 Mbps Router Installation Guide

TELTONIKA Networks RUT906 E-Mark 4G Router Owner’s Manual
Table of Contents
- 1. Ax1800 Dual-band Wi-fi 6 Router - Installation →
- 2. About This Guide - Connect The Hardware →
- 3. Maximum Wireless Signal Rates - Use Of 802.11ax (wi-fi 6) →
- 4. Get To Know About Your Router - Product Overview →
- 5. Get To Know About Your Router - The Back Panel →
- 6. Get To Know About Your Router - Reset Button →
- 7. Connect The Hardware - Position Your Router →
- 8. Connect The Hardware - Position Your Router →
- 9. Connect The Hardware - Method 1: Wired →
- 10. Log In To Your Router →
- 11. Log In To Your Router - Set Up The Tcp/ip Protocol →
- 12. Set Up Internet Connection - Use Quick Setup Wizard →
- 13. Set Up Internet Connection - Use Quick Setup Wizard →
- 14. Set Up Internet Connection - Manually Set Up Your Internet C... →
- 15. Set Up Internet Connection - Static Ip →
- 16. Set Up Internet Connection - Secondary Connection →
- 17. Set Up Internet Connection - Set Up The Router As An Access ... →
- 18. Set Up Internet Connection - Enable Ipv6 →
- 19. Set Up Internet Connection - Manually Set Up Your Internet C... →
- 20. Set Up Internet Connection - Configure Lan Ports →
- 21. Register A Tp-link Id - Change Your Tp-link Id Information →
- 22. Register A Tp-link Id - Change Your Tp-link Id Information →
- 23. Tp-link Cloud Service - Manage The User Tp-link Ids →
- 24. Tp-link Cloud Service - Add Tp-link Id To Manage The Router →
- 25. Manage The Router Via The Tp-link Tether App - Launch The Ap... →
- 26. Guest Network - Create A Network For Guests →
- 27. Create A Network For Guests - Warning →
- 28. Guest Network - Customize Guest Network Options →
- 29. Guest Network - Allow Guests To Access Your Local Network →
- 30. Usb Settings - Access The Usb Storage Device →
- 31. Usb Settings - Access The Usb Storage Device →
- 32. Usb Settings - Access The Usb Device Remotely →
- 33. Usb Settings - Configure Remote Access Settings →
- 34. Usb Settings - Set Up Authentication For Data Security →
- 35. Usb Settings - To Only Share Specific Content →
- 36. Usb Settings - Media Sharing →
- 37. Usb Settings - Time Machine →
- 38. Usbsettings - Timemachine →
- 39. Parental Controls - Setting Up Access Restrictions →
- 40. Parental Controls - Setting Up Access Restrictions →
- 41. Parental Controls - Set Time Restrictions On Internet Access →
- 42. Parental Controls - Monitoring Internet Usage →
- 43. Parentalcontrols →
- 44. Qos →
- 45. Enableqosandsetbandwidthallocation - Go Toadvanced>qos>globa... →
- 46. Set Up A Onemesh Network - Manage Devices In The Onemesh Net... →
- 47. Onemesh With Seamless Roaming - Same Network Name & Password →
- 48. Onemesh With Seamless Roaming - Connect A Onemesh Extender T... →
- 49. Onemesh With Seamless Roaming - Manage Devices In The Onemes... →
- 50. Onemesh With Seamless Roaming - Manage The Onemesh Device As... →
- 51. Protect The Network From Cyber Attacks - Access Control →
- 52. Protect The Network From Cyber Attacks - Access Control →
- 53. Network Security - Allow Specific Device(s) →
- 54. Network Security - Add Unconnected Devices →
- 55. Network Security - Ip & Mac Binding →
- 56. Network Security →
- 57. Sharelocalresourcesontheinternetbyportforwarding - Openports... →
- 58. Nat Forwarding - Share Local Resources On The Internet By Po... →
- 59. Nat Forwarding - View Common Services →
- 60. Nat Forwarding - Set Up A Dynamic Dns Service Account →
- 61. Natforwarding - Makeapplicationsfree... →
- 62. Nat Forwarding - Assign A Static Ip Address To Your Pc →
- 63. Nat Forwarding - Upnp →
- 64. Vpn Server - Use Openvpn To Access Your Home Network →
- 65. Useopenvpntoaccessyourhomenetwork - Setupopenvpnserveronyour... →
- 66. Vpn Server - Configure Openvpn Connection On Your Remote Dev... →
- 67. Vpn Server - Enable Pptp →
- 68. Vpn Server - Configure Pptp Vpn Connection On Your Remote De... →
- 69. Vpn Server →
- 70. Vpn Server →
- 71. Vpn Server →
- 72. Customizeyournetwork... - Change Thelansettings →
- 73. Change Thelansettings - Configuretosupportip... →
- 74. Customizeyournetwork... - Enableiptv/vlan →
- 75. Customizeyournetwork... - Specifydhcpserverset... →
- 76. Customizeyournetworksettings - Setupadynamicdnsserviceaccoun... →
- 77. Customizeyournetwork... - Createstaticroutes →
- 78. Customize Your Network Settings - Change The Routers Lan Ip ... →
- 79. Customizeyournetwork... - Subnetmask →
- 80. Customizeyournetworksettings - Enableordisablewirelessfuncti... →
- 81. Customizeyournetwork... - Changethesecurityopt... →
- 82. Customizeyournetwork... - Scheduleyourwireless... →
- 83. Customizeyournetwork... - Usewpsforwirelesscon... →
- 84. Customizeyournetwork... - Pushthewpsbutton →
- 85. Customizeyournetwork... - Wmm →
- 86. Manage The Router - Upgrade The Firmware →
- 87. Manage The Router - Upgrade The Firmware →
- 88. Manage The Router - Local Upgrade →
- 89. Manage The Router - Restore Configuration Settings →
- 90. Change The Login Password - Password Recovery →
- 91. Manage The Router - Local Management →
- 92. Manage The Router - Allow All Lan Connected Devices To Manag... →
- 93. Manage The Router - Remote Management →
- 94. Manage The Router - Set Up A Dynamic Dns Service Account →
- 95. Manage The Router - Save Log →
- 96. Manage The Router - Test The Network Connectivity →
- 97. Manage The Router - Diagnostics →
- 98. Manage The Router - Set Up System Time →
- 99. Manage The Router - Set Time →
- 100. Manage The Router - Set The Router To Reboot Regularly →
- 101. Manage The Router - Control The Led →
- 102. Wireless Password Recovery - Web Management Password Reset →
- 103. Lan Settings - Advanced →
- 104. Reset The Router To Factory Default Settings - Reconfigure T... →
- 105. Restart The Modem And The Router - Reset The Router To Facto... →
- 106. Visit Http://tplinkwifi.net, And Log In With Your Tp-link Id... →
- 107. Power Off Your Modem And Router - Confirm Your Internet Conn... →
- 108. Make Sure The Wireless Adapter Driver Is Installed Successfu... →
- 109. Check The Wireless Signal Strength Of Your Network - Change ... →
- 110. Fcc Rf Radiation Exposure Statement - Compliance With Fcc Rf... →
- 111. Caution - Radiation Exposure Statement →
- 112. Safety Information - Explanations Of The Symbols On The Prod... →



























































































































