Home > VIMAR > VIMAR 01507 By me KNX Router Instruction Manual

VIMAR 01507 By me KNX Router Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

BUILDING AUTOMATION

Description of operation

5.5.2 Network backbone conﬁguration with KNX Secure active.

If you want to use KNX Secure we recommend you set the Backbone IP to Secure (by default ETS sets it to “Automatic”). To set the backbone to secure, display

the Topology and edit the “Security” property.

This means that all the IP/KNX devices connected to the system support and are conﬁgured with KNX Secure.

In the presence of IP/KNX devices that are not conﬁgured in KNX Secure, ETS will display the following warning:

N.B. If reset devices are present, the default physical address 15.15.255 is not read by the ETS diagnostics because it is transmitted unencrypted when the

Backbone is Secure. Once the Backbone secure is activated, the conﬁguration status of the various Secure devices will show as not up to date and so the ap-

plication programmes will have to be downloaded again.

5.5.3 01548 interface conﬁguration

For the correct operation of the router 01507 conﬁguration procedure, the physical addresses on the secondary line (TP) must be ﬁltered.