Home > VIMAR > VIMAR 01507 By me KNX Router Instruction Manual

VIMAR 01507 By me KNX Router Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

BUILDING AUTOMATION

Product description - KNXnet/IP

2.6 Keeping the device Certiﬁcate

The device Certiﬁcate is on the label afﬁxed to the side of the casing. To avoid unauthorised access, the device Certiﬁcate should be removed from the device once it

has been commissioned. To this end, the label is divided into two parts, one ﬁxed part which remains afﬁxed to the casing (for identiﬁcation), and the other removable

part (to be kept).

Art. 01507

Serial number: 0072031B45CB

MAC address:

D0 76 50 00 57 EC

Art. 01507

part to detach

0072031B45CB

Device certiﬁcate:

ABZAGG-2BZKDF

54SHGN-OIPIXZ

RRPF6Z-A5GESR

After adding the device Certiﬁcate to the dedicated list in ETS, keep the removed part of the label in a safe place. The list of device Certiﬁcates must only include certiﬁ-

cates of KNX Secure devices used for ETS projects. ETS will automatically use the correct certiﬁcates for device programming.

To identify the device clearly after the detachable part has been removed, the serial number is printed on both parts of the label, the one you have removed and the one

that remains on the casing.

If you lose the removed part with the device Certiﬁcate, it will only be available in the password-protected ETS project.

Caution! If the device Certiﬁcate is lost and cannot be retrieved, in other words if the part of the label removed can no longer be found and the project password has

also been lost, the device can no longer be used securely (the Security function will no longer be available for activation). If this is the case, even after performing a

factory reset, the device may only be used in the non-protected mode, like a “normal” device.

2.7 Summary of functions

• The device Certiﬁcate guarantees that only authorised persons may access device 01507.

• When the ETS “Secure Commissioning” function is active, the conﬁguration data are only downloaded in encrypted KNX Data Secure format.

• The device is powered by the By-me bus.

• The ﬁrmware can easily be updated from a web browser.

• Router 01507 supports KNXnet/IP, ARP, ICMP, IGMP, HTTP, UPnP discovery, UDP/IP, TCP/IP, DHCP and AutoIP.

3. KNXnet/IP

The presence of the Internet protocol (IP) has made the definition of the KNXnet/IP protocol possible. As documented in the specifications of the KNXnet/IP protocol, the

KNX data can be transmitted encapsulated in IP packages.

3.1 Updating the IP ﬁrmware

Thanks to the IP bootloader function, the ﬁrmware can be updated remotely and the contents of the ﬂash memory can be re-written via an IP connection. This is not a

simple application download. The communication stack and application software are downloaded.

The ﬁrmware update procedure via IP can be carried out from the front-end Web of router 01507, which is independent of the ETS and which uses special messages

to speed up the process. In order to protect this process, it uses special encryption.