Home > VIMAR > VIMAR 01507 By me KNX Router Instruction Manual

VIMAR 01507 By me KNX Router Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

BUILDING AUTOMATION

The KNX Secure protocol

4. The KNX Secure protocol

The device is used to activate the “KNX SECURE” data encryption protocol, entering the QR code or the digits in ETS and also creating a password associated to the

project.

N.B.: If the QR code printed on the label is too small, take a photo of it with a smartphone and enlarge it.

The password is mandatory in the following cases:

- when enabling the Secure part of the devices in the project

- when entering the certificate of a Secure device in the project

If the Secure part of a device is disabled, it acts exactly like a device that does not support this protocol.

If you do not wish to enable the Secure part, when importing the device into the project close the Secure request window as described in the following procedure.

1. Add the Secure device to the ETS project.

KNX Secure device

2. Ignore the set password request.



Close the window

select Cancel

