Home > VIMAR > VIMAR 01507 By me KNX Router Instruction Manual

VIMAR 01507 By me KNX Router Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

BUILDING AUTOMATION

Description of operation

5.5 Programming

5.5.1 Programming the individual address (and application)

To download the individual address in a device, the Programming mode must be active. Press the programming button to activate or deactivate the program-

ming mode. A red lit conﬁguration LED (I) indicates the programming mode is active. When the download from ETS is activated and you press the programming

button, the device stores the new individual address in the memory. The security settings are updated by downloading the individual address and application (L).

The KNX address can be assigned to the device by setting the desired address in the ETS properties window. At the end of download from ETS, the device will

restart.

The device is supplied with the individual address 15.15.255 (default factory setting). We advise against using this address for normal operation of a system

and recommend assigning a different address when commissioning.

If the conﬁguration LED (I) ﬂashes red, this means the Ethernet cable is not connected correctly or that a connection with an IP network is not available.

The ETS database is available on the company website and in the ETS on-line catalogue.