Home > VIMAR > VIMAR 01507 By me KNX Router Instruction Manual

VIMAR 01507 By me KNX Router Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

BUILDING AUTOMATION

Organising the DCA for customising associations

To complete conﬁguration, you need to specify the KNX format that the By-me Plus KNX SECURE Router should adopt; the options are:

• 2 levels

• 3 levels.

Next, the installer can set the KNX group address of the communication object they have just deﬁned.

The group address is inserted in the “By-me Addr” column in the chosen KNX format.

6.10 Assigning By-me data to Communication Objects

After adding the KNX communication objects to the By-me Plus KNX SECURE Router device, proceed as follows:

1. Conﬁgure the By-me system with the home automation system gateway;

2. Export the system in xml format;

3. Access the “DCA” of the By-me/KNX gateway;

4. Import the xml ﬁle;

5. Drag&Drop the By-me Plus node to the row associated with the By-me Plus KNX SECURE Router of the routing table.

In this case the DCA should check the consistency of the “Data Type of the By-me DPTx” selected with what is already set in the destination row (Main DPT). Only if

the respective Main DPTs match will the Drop be permitted (permitting the same format of the Main DPT on the By-me side with respect to the one on the KNX side:

e.g. By-me Data Type 1.001  KNX Main Data Type 1.xxx).

6.11 Copying Communication Objects

The Copy function

allows you to make a copy of a Communication Object for those which only have KNX data.

Once you have selected a row in the Communication Objects table, you can duplicate the related Communication Object, whose window appears with the “Direction”

and “Data Type” ﬁelds already set. ou will need to edit the “Name” (which must be different).

6.12 Errors

The following errors are envisaged:

• “Copy Communication Object is disabled when there is no row in the By-me/KNX Gateway or it hasn’t been selected

• “Addition” of a Communication Object when the By-me/KNX Gateway table has already reached 500 rows.

• Communication Object selected has all the By-me parameters deﬁned: in this case only the KNX part is duplicated (the name changes everywhere) whereas the

By-me part stays empty and has to be associated starting with a node of the By-me tree.

N.B.: In the event that the By-me parameters are deﬁned, the copy function is disabled.