Home > grass valley > Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual
×
- 1. Mv-825-rtr Multiviewer With Integrated Router User Manual
- 2. Notices (Fcc Compliance → Patent Information → Copyright And Trademark Notice → Terms And Conditions → Warranty Information)
- 3. Read Me First (About This Manual → Installation → Configuration → Operation → Safety Information → Related Documents)
- 4. Notices (Important Safety Information → Symbols And Their Meanings)
- 5. Warnings
- 6. Notices (Cautions → Battery Handling → Cautions For Lcd And Tft Displays)
- 7. Mesures De Sécurité Et Avis Importants (Signification Des Symboles Utilisés)
- 8. Notices (Avertissements → Identifie Une Borne De Mise À La Terre Externe → Signale La Présence De Composants Sensibles À Lélectricité Statique → Utilisez Des Procédures, Des Équipements Et Des Surfaces Antistatiques → Un Cordon Dalimentation Dûment Homologué Doit Être Utilisé → La Protection De Ce Produit Contre Les Courts-circuits)
- 9. Installation De L'équipement (Vérification De La Configuration Des Modules D'alimentation → Ventilation Adéquate → Précautions De Sécurité Avant L'entretien → Utilisation Des Fusibles Appropriés → Éviter Les Atmosphères Explosives → Mise À La Terre Avant La Mise Sous Tension)
- 10. Protectioncontrelesdéchargesélectrostatiques(des) (Manipulationdelapile → Précautionspourlesécranslcdettft)
- 11. Environmental Information (European (ce) Weee Directive → Recycling Information → Specifications Are Subject To Change Without Notice → Questions About Grass Valley Environmental And Social Involvement)
- 12. Notices (Further Safety Information → Lithium Batteries → Battery Warning → Battery Disposal)
- 13. Laser Safety (Laser Safety - Fiber Output Sfp Modules Warning → Ventilation → Caution)
- 14. Notices (Equipment Mains Supply Voltage → Mains Supply Rating For The Equipment. → Rear Mains Inlets And Mains Supply Rating → Power Cords Supplied → Power Cords Supplied For The Usa → Power Cords Supplied For Countries Other Than The Usa)
- 15. Safety And Emc Standards (Safety Standards → Emc Standards → Warning)
- 16. Notices (Emc Performance Of Cables And Connectors → Signal/data Ports → Coaxial Cables → D-type Connectors)
- 17. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Document History → Publication → Document Part Number → Document Issue And Revision → Notes)
- 18.
- 19. Product Overview (Mv-825-rtr Configuration, Control And Monitoring → Router Configuration And Control → Unit Installation → Unpacking → Safety And Emc Standards → Further Safety Information)
- 20. Notices (Environmental Considerations → Chassis Dimensions → Chassis Ventilation → Rack Mounting → Powering → Initial Connection And Configuration)
- 21. Monolithic Crosspoint Sources And Destinations (Accessing Mv-825-rtr Router Crosspoint Control Screen → Xypanel Control Screen - Routing Tab → Routing Examples → Router Config And Control Web Pages → Make A Route In A Crosspoint → Apply Changes And Restart)
- 22. Notices (Router Function → Getting Started → Preliminary Mv-825-rtr Router Configuration → Initial Configuration → Routing → Maintenance - Hardware)
- 23. Appendix A Mv-825-rtr Specification (Operating Environment → Ethernet Rear Panel Connectors → Default Ip Addresses → Monitoring And Alarms → Appendix D Configuration File → Snmp Support (router))
- 24.
- 25. Product Overview (G Sdi Video Inputs → Routed 12g Sdi Video Outputs)
- 26. Product Overview (Features → Configured Via A Web Interface → Controllable From → Internal Multiviewer → Advanced Broadcast Media Monitoring → Screen Layout Flexibility)
- 27. When Designing Video Wall (Flexible Alarm Capability → H.264 Streaming Out Of Scaled Input-copies)
- 28. Product Overview (Order Codes → Licenses → Sfp Modules (sdi Video))
- 29. Mv-825-rtr Architecture (Inputs And Outputs)
- 30. Product Overview (Functional Block Diagram → Mv-8 Series Multiviewer Core (48x12) → Video Router Crosspoint (60x48) → Router Controller → Mv Input Crosspoint (48x48) → Multiviewer Inputs (internal))
- 31. Router Crosspoint (Router Controller → Multiviewer Core → Multiviewer Input Crosspoint → Multiviewer Head Output Crosspoint → Streaming Out Of Multiviewer Input-copies)
- 32. Product Overview (Mv-825-rtr Configuration, Control And Monitoring → Video Router Block → Multiviewer Block → Mv-825-rtr Control Screen Interfaces → Configuring Of The Multiviewers Video Walls)
- 33. Mv-8 Series Core Multiviewer (Video Wall Design → Router Block → Video Reference)
- 34. Product Overview (Router Configuration And Control)
- 35. Mv-825-rtr Web Interface (Hardware Control Panels → Router Control Methods → Protocols → Snmp Support And Mib Files)
- 36. Product Overview (Software Compatibility → Unit Installation → Router Configuration Control Screens → Router Crosspoint Control Screens → Router Config And Control Web Pages → Getting Started)
- 37. Hardware Description (Chassis Overview → Chassis Front → To Open The Front Door → To Close The Front Door → Front Indicators → Rear Panel)
- 38. Hardware Description (Chassis Overview → Optical Outputs)
- 39. Chassis Front (To Open The Front Door → Door Fans → Fan Supply Wires)
- 40. Hardware Description (Before Closing The Door → To Close The Door → Caution: Close The Door)
- 41. Mv-825-rtr Multiviewer With Integrated Router (Front Indicators → Mv-825-rtr Front Main Card → Caution)
- 42. Hardware Description (Front Indicators → Sub-module → Dip Switches (engineering Use Only) → Connectors For (engineering Use Only) → Front Edge Of Card → Fan Supply Header Connectors)
- 43. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Caution: Electrostatic Damage → Contact Grass Valley Customer Support → Ensure The Chassis Front Door Is Closed And The Fans Are All Operating Correctly → Hardware Communications Fault Detected → Software Fault Detected → Mv-825-rtr Card Overheating)
- 44. Hardware Description (Rear Panel → Unit Serial Number → Important)
- 45. Rear Panel Connectors (Router Video Outputs → Router Video Inputs → Aux Inputs/outputs → Multiviewer Head Display → Multiviewer Control And Monitoring → Router Control Ethernet Ports)
- 46. Hardware Description (Rear Panel Connectors → Mv-825-rtr Rear Connectors → Bnc Reference Connectors → Multiviewer Head Display Outputs → Rear Connectors - Network Interface Ports → Ltc & Gpio)
- 47. Rear Connectors (Hd Bnc Video Inputs → Hd-bnc Connector (12g) → Connector Label And Led → Catsii Leds)
- 48. Hardware Description (Hd Bnc Video Outputs → Catsii Leds → Catsii Colors Page)
- 49. Bnc Reference Connectors (Ac Mains Inlets)
- 50. Hardware Description (Ac Mains Inlets → Psu Status Led → Psu Module Outputs → Main Output → Standby Output → Warning)
- 51. Multiviewer Head Display Outputs (Display Output Leds → Multiviewer Head Display Output Sfp Cage)
- 52. Hardware Description (Rear Connectors - Aux Inputs/outputs → Aux Inputs → Aux Outputs)
- 53. Rearconnectors-networkinterfaceports (Routerandmultiviewercontrol → Ethernetports → Linkstatusleds → Gethernetrj45s → Mv-825-rtrethernetleds → Ethernetlinkleds)
- 54. Hardware Description (Ltc And Gpi Connector → Ltc And Gpio Connector Pin-outs → Female High Density 26 Way 'd' Type Connector Assignments → Pin Number Signal)
- 55. Mv-825-rtr Gpi Outputs (Mv-825-rtr Gpi Inputs → Example: Driving Leds From The Gpi Outputs → External Circuit → Gpi Connector Pins)
- 56. Hardware Description (Ltc And Gpi Connector)
- 57. Unit Installation (Unpacking → Environmental Considerations → Chassis Dimensions → Chassis Ventilation → Rack Mounting → Initial Connection And Configuration)
- 58. Unit Installation (Unpacking → Environmental Considerations → Chassis Dimensions → Chassis Ventilation)
- 59. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Air Flow Out → Air Flow In → Caution)
- 60. Unit Installation (Cooling Fan Failure → Air Flow → Fans In Front Door → Air Flow → Cooling Fan Failure → Caution:)
- 61. Rack Mounting (Location In Rack → Mounting The Mv-825-rtr Into A Rack → Preliminaries)
- 62. Unit Installation (Mounting The Mv-825-rtr Into A Rack → Fitting The Unit)
- 63. Secure The Mv-825-rtr Chassis In The Rack (Chassis Rack Mounting Holes → Close And Secure The Front Door)
- 64. Unit Installation (Cabling Up In A Rack → Mains Power → Network Connection → Multiviewer Head Display Outputs → Initial Connection And Configuration → Booting Up)
- 65. Powering (Routing → Licensed Features → Booting Up)
- 66. Unit Installation (Booting Up → License Serial Number)
- 67. The Start-up Splash Screen (Maintenance Of The Core Multiviewer → Initial Unit Configuration → Network Interfaces → Ip Address → Sub-net Mask → Rollcall+ Domain Number)
- 68. Unit Installation (Initial Connection And Configuration → Core Multiviewer Initial Connection And Configuration → Router Initial Connection And Configuration → Connection Preparation Instructions)
- 69. Initial Connection To The Core Multiviewer (Open Template → Enter The Ip Address Of The Mv-825-rtr Units Multiviewer → Default Ip Addresses Of Mv-825-rtr Network Ports → Find Out The Ip Address Of The Mv-825-rtrs Multiviewer → The Start-up Splash Screen → Multiviewer Control Screen)
- 70. Unit Installation (Core Multiviewer Initial Connection And Configuration → Initial Configuration For Core Multiviewer → Core Mv-8 Control Screens → Banner Information In A Control Screen → Ntp Status Box → Selection Box)
- 71. Initial Configuration For Core Multiviewer (Network Settings → Output Format → System-setup Control Screen)
- 72. Unit Installation (Core Multiviewer Initial Connection And Configuration → Reference Input → System Reset → Router Initial Connection And Configuration)
- 73. Router Initial Connection And Configuration (Default Routing For New Mv-825-rtr → Connection And Configuration Methods)
- 74. Unit Installation (Router Initial Connection And Configuration → Router Initial Connection And Configuration (control Screen) → Default Ip Addresses → Initial Connection To The Router)
- 75. Router Configuration Control Screens
- 76. Unit Installation (Router Initial Connection And Configuration → Initial Configuration For Router → Important → Router Initial Connection And Configuration (web Page))
- 77. Initial Configuration For Router (web Page) (Connection Preparation Instructions → System Configuration → System-setup → System Network Settings)
- 78. Unit Installation (Getting Started → Getting Started (core Multiviewer) → Getting Started (gv Orbit) → Getting Started (router))
- 79. Core Mv Control Screens (Mv-8 Series Core Multiviewer User Manual → Control Screens For The Core Multiviewer → Information About The Core Multiviewer In The Mv-825-rtr)
- 80. Core Mv-8 Control Screens
- 81. Router Configuration Control Screens (Configuration Of Router → Configure Mv-825-rtr Router Block → Accessing Configuration Control Screen In Rollcall Control Panel → Accessing Configuration Control Screen In Gv Orbit Client → Router - Configuration Screens → Comms Setup - Ip Settings)
- 82. Router Configuration Control Screens (Configuration Of Router → Router Controller → Main Video Router → Mv Head Output Crosspoint → Mv Input Crosspoint)
- 83. Configure Mv-825-rtr Router Block (Rollcall Control Panel → Gv Orbit Client → Accessing Configuration Control Screen In Rollcall Control Panel)
- 84. Router Configuration Control Screens (Accessing Configuration Control Screen In Gv Orbit Client → Rollcall Control Screen → Open Template Dialog)
- 85. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 86. Routerconfigurationcontrolscreens (Router-configurationscreens → Selectionboxingvorbitclient → Selectionboxinrollcallcontrolpanel → Router-unitinformationscreen → Router-systeminformationscreen → Router-routerportconfigurationscreen)
- 87. Router - Unit Information Screen (Rollcall Control Panel → Read-write Information)
- 88. Routerconfigurationcontrolscreens (Router-unitinformationscreen → Softwareversion → Controllerfpgaversion → Osversion → Enclosure → Serialnumber)
- 89. Mv-825-rtr Unit Information Screen - Further Settings (Use Long Names → Time Auto Set → Ntp Server → Rollcall Log Server)
- 90. Router Configuration Control Screens (Router - Unit Information Screen → Timezone)
- 91. Router - System Information Screen (System Information → Reference)
- 92. Router Configuration Control Screens (Router - System Information Screen → Force Reference One → Force Reference Two → Auto Match)
- 93. Router Port Configuration Screen (Router Crosspoint (60x48) → Router Config And Control Web Pages)
- 94. Router Configuration Control Screens (Router - Router Port Configuration Screen → Router Crosspoint → Router Outputs (1 To 48) → Router Inputs (1 To 48) → Internal Multiviewer Head Signals (1 To 12))
- 95. Input Ports (Output Ports → Persistence)
- 96. Routerconfigurationcontrolscreens (Router-multiviewerinputportconfigurationscreen → Mvinputcrosspoint(48x48) → Multiviewerinputportconfiguration → Configureinputandoutputrouterportsofmvinputcrosspoint → Informationcontrolswebpage)
- 97. Mv Input Crosspoint (Sources → Destinations → Router - Router Port Configuration Screen → Input Ports → Output Ports)
- 98. Router Configuration Control Screens (Router - Multiviewer Head Port Configuration Screen → Mv Head Crosspoint (60x12) → Multiviewer Head Port Configuration Control Screen Enables → Configure Input And Output Router Ports → Information/controls May Also Be Shown/modified On The Units Web Page)
- 99. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Sources → Destinations → Router - Router Port Configuration Screen)
- 100. Router Configuration Control Screens (Router - Comms Setup Screen → Comms Setup - Ip → Comms Setup - Settings → Comms Setup - Snmp → Comms Setup - Rollcall Items → Comms Setup - Syslog (logging))
- 101. Comms Setup - Ip Settings (Caution → Comms Setup - Ip Port 1 And 2 Settings)
- 102. Routerconfigurationcontrolscreens (Commssetup-rollcallitems → Commssetup-ipport1and2settings → Commssetup-dnssettings)
- 103. Comms Setup - Rollcall Items (Any Log Server → Specific Log Server → Comms Setup - General)
- 104. Router Configuration Control Screens (Comms Setup - Rollcall+ → Comms Setup - General Items → General Switcher (sw-p-02) → General Remote (sw-p-08))
- 105. Comms Setup - Rollcall+ Items (Enable → Domain → Address → Note 1 → Rollcall Address)
- 106. Routerconfigurationcontrolscreens (Commssetup-snmp → Trapaddresses)
- 107. Comms Setup - Syslog (logging) (Comms Setup - Syslog Items → Enable → Logging Format → Address → Ip Port → Note 1)
- 108. Router Configuration Control Screens (Comms Setup - Restart Unit)
- 109. Router - Log Fields Screen (Log Fields → System_description → Uptime)
- 110. Routerconfigurationcontrolscreens (Router-logfieldsscreen)
- 111. Router Crosspoint Control Screens (Monolithic Overall Router Crosspoint → Monolithic Crosspoint Sources And Destinations → Accessing Mv-825-rtr Router Crosspoint Control Screen → Monolithic Crosspoint Control Screen → Xypanel Control Screen - Routing Tab → Routing Examples)
- 112. Router Crosspoint Control Screens (Router → Introduction)
- 113. Monolithic Overall Router Crosspoint (Logical Crosspoints → Monolithic Overall Crosspoint → Sources → Destinations → Monolithic Crosspoint Sources And Destinations)
- 114. Router Crosspoint Control Screens (Monolithic Crosspoint Sources And Destinations → Monolithic Crosspoint Sources → Mv-825-rtr Router Video Inputs (48) → Aux Inputs, Reserved For Future Use (2) → Internal Multiviewer Head Signals (12))
- 115. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Monolithic Crosspoint Destinations → Mv-825-rtr Router Video Outputs (48) → Mv-825-rtr Multiviewer Head Display Outputs (12) → Aux Outputs, Reserved For Future Use (2) → Internal Multiviewer Tile Signals (48))
- 116. Router Crosspoint Control Screens (Accessing Mv-825-rtr Router Crosspoint Control Screen → Rollcall Control Panel Installation Instructions → Rollcall Control Panel User Manual → Router Monolithic Crosspoint Routing Control Screen → Making Routes In The Monolithic Crosspoint → Editing Source And Destination Names)
- 117. Mv-825-rtr Multiviewer With Integrated Router (Monolithic Crosspoint Control Screen → Routing Is Initially Set To Be 1-to-1 → Selection: Xy Panel Control, And Routing Screens → Xy Panel Control Screen - Routing Tab → Routing Screen)
- 118. Router Crosspoint Control Screens (Xypanel Control Screen - Routing Tab → Xypanel Control Screen - Edit Names Tab → Xypanel Control Screen - Edit Protect Tab → Xypanel Control Screen - Options Tab → Routing → Routing Examples)
- 119. Destination Protect (Lock Route → Protected Status Of Each Destination → Routing Screen Instructions → Toggling Protected Status → Destination Buttons → Padlock Symbol Indication)
- 120. Router Crosspoint Control Screens (Xypanel Control Screen - Routing Tab → Filter Names → Clear Filter → Regex Filter)
- 121. Panel Lock
- 122. Router Crosspoint Control Screens (Xypanel Control Screen - Edit Names Tab → Edit Names Tab Enables A User To Edit The Crosspoint Source Button Names And Destination Button Names → To Edit A Source Or Destination Button Name)
- 123. Edit Protect Tab (Protecting A Destination → Unprotecting A Destination)
- 124. Router Crosspoint Control Screens (Xypanel Control Screen - Options Tab → User And Admin Mode)
- 125. User Mode (Admin Mode → Options Controls → Router Functions)
- 126. Router Crosspoint Control Screens (Xypanel Control Screen - Options Tab → Xy Panel Control Screen - Option Controls → Router Display → Popout Display)
- 127. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 128. Router Crosspoint Control Screens (Xypanel Control Screen - Options Tab → Xy Panel Control Screen - Option Controls → Panel Sizes → Button Maps)
- 129. Manage Options
- 130. Router Crosspoint Control Screens (Routing Screen → Take Mode → Destination Protect)
- 131. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Routing → Protected Destination)
- 132. Router Crosspoint Control Screens (Routing Screen → Protect Destination In Routing Screen → Destination Protected Shown In Xy Panel Control Screen)
- 133. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Routing Examples → Simple Route With Xy Panel Control Screen)
- 134. Router Crosspoint Control Screens (Simple Route With Xy Panel Control Screen → Undo Timeout Configuration)
- 135. Take Information While Routing (Simple Route With Routing Screen → Select A Destination → Select A New Source → Pre-select A Source → Click Take → Cancel A Source Pre-selection)
- 136. Router Crosspoint Control Screens (Simple Route With Routing Screen → Panel Control)
- 137. Router Config And Control Web Pages (Open Home Web Page → Navigation Side Bar → Router Information → Make A Route In A Crosspoint → Routing And Locking → System Configuration Page)
- 138. Router Config And Control Web Pages (Open Home Web Page → Ethernet Rear Panel Connectors)
- 139. Home Page (Navigation Side Bar → Rear Connection → Functional Block Diagram → System Configuration Page → Catsii Colors Page → Router Crosspoint)
- 140. Router Config And Control Web Pages (Home Page → Functional Block Diagram → Router Crosspoint Inputs Page → Router Crosspoint Page → Router Crosspoint Outputs Page → Mv Input Crosspoint Page)
- 141. Router Information (System Information → System Reference Standard)
- 142. Router Config And Control Web Pages (Router Information → System Status → Controller Dc Power Supply Status → Controller Temperature → Reference Standard One → Controller Fpga Firmware Version)
- 143. Catsii Colors Page (Color Options)
- 144. Router Config And Control Web Pages (Router Crosspoint → Sources And Destinations → Router Crosspoint Page → Router Crosspoint Inputs Page → Router Crosspoint Outputs Page)
- 145. Make A Route In A Crosspoint (To Lock A Destination/route In A Crosspoint → Lock / Unlock From The Web Page → To Lock)
- 146. Router Config And Control Web Pages (Lock A Destination/route In A Crosspoint → Routing To A Locked Destination/route → Unlock A Locked Destination/route)
- 147. Router Crosspoint Page (Mv Input Crosspoint Page → Mv Head Crosspoint Page → Functional Block Diagram → Source Buttons → Destination Buttons → Take Button)
- 148. Router Config And Control Web Pages (Source Buttons → Source Button, Shows: → Currently-routed Source (to A Selected Destination) → Pre-selected Source → Primary Quad-link Source Button → Other Members Of Quad-link Group.)
- 149. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Destination Buttons → Selected Destination → Primary Quad-link Destination Button → Other Members Of Quad-link Group)
- 150. Router Config And Control Web Pages (Router Crosspoint Inputs Page → Router Crosspoint Inputs Page → Router Inputs 1 To 48 → Multiviewer Heads 1 To 12)
- 151. Router Inputs (Internal Multiviewer Head Signals → Router Crosspoint Inputs Page)
- 152. Router Config And Control Web Pages (Router Crosspoint Inputs Page → K → Primary Quad-link → Video 32 Character Name → Video 8 Character Name)
- 153. Router Crosspoint Outputs Page (Apply Button → All Router Outputs (48) → Router Outputs 1 To 48 → Fig. 7-13: Router Crosspoint Outputs Page → Table 7-4 Describes The List Columns On The Page.)
- 154. Router Config And Control Web Pages (Router Crosspoint Outputs Page → Router Crosspoint Outputs Information → First Or Primary Quad-link In Group → Video 32 Character Name → Video 8 Character Name)
- 155. Mv Input Crosspoint (Sources And Destinations)
- 156. Router Config And Control Web Pages (Routing And Locking → Make A Route → To Lock/unlock A Route)
- 157. Mv Input Crosspoint Page (Router Crosspoint Page → Functional Block Diagram → Source Buttons → Destination Buttons → Take Button)
- 158. Router Config And Control Web Pages (Mv Input Crosspoint Inputs Page → Changes Made To Common Inputs Are Reflected In The Other Respective Web Pages. → The Page Displays A List Of Crosspoint Inputs (sources For The Crosspoint).)
- 159. Router Inputs (Apply Button → Input Settings Configuration → Confirming Pop-up Dialog → Table 7-3 Description)
- 160. Router Config And Control Web Pages (Mv Input Crosspoint Outputs Page → Apply Button → Internal Multiviewer → Input Signals → Crosspoint Outputs → Settings Changes)
- 161. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Installation → Setup → Configuration → User Interface → Troubleshooting → Specifications)
- 162. Router Config And Control Web Pages (Mv Head Crosspoint → Sources And Destinations)
- 163. Routing And Locking (Make A Route → To Lock/unlock A Route → Mv Head Crosspoint Page → Mv Head Crosspoint Inputs Page → Mv Head Crosspoint Outputs Page)
- 164. Router Config And Control Web Pages (Mv Head Crosspoint Page → Source Buttons → Destination Buttons → Take Button → Functional Block Diagram)
- 165. Mv Head Crosspoint Inputs (Note → Router Input 8 → Crosspoint Inputs → Mv-825-rtr Router Inputs → Internal Multiviewer Head Signals → All)
- 166. Router Config And Control Web Pages (Mv Head Crosspoint Inputs Page → Router Inputs → Internal Multiviewer)
- 167. Mv Head Crosspoint Outputs Page (Apply Button → All Items → External, Rear → Multiviewer Head → Display Outputs → Table 7-4 On Page 130 Describes The List Columns On The Page.)
- 168. Router Config And Control Web Pages (System Configuration Page → System Settings Are Shown On This Page And May Be Changed. → Apply Changes And Restart → Caution When Two Router Network Ports Are Used (router Ethernet Ports 1 And 2, I.e. Rear Connections Router 1 And Router 2), Then The Ports Should Be Configured To Be On Different Sub-nets For Correct Operation.)
- 169. System Configuration Page Information (Protocol Settings → Snmp → System Network Settings)
- 170. Router Config And Control Web Pages (System Configuration Page → System Files → Logging Settings)
- 171. Apply Changes And Restart
- 172. Router Config And Control Web Pages (About Page)
- 173. Core Mv-8 Multiviewer Features (Core Multiviewer User Manual → Input Alarms → Input-copy H.264 Streams → Audio Meters → Other Supported Core Mv Features)
- 174. Core Mv-8 Multiviewer Features
- 175. Router Function (Router Rear Connections → Internal Crosspoints → Monolithic Router Crosspoint → Default Routing For New Mv-825-rtr → Destination Lock / Unlock (protect / Unprotect))
- 176. Router Function (Router Rear Connections → X Video Inputs → X Video Outputs → Router Control → Video References And Loop-throughs → Introduction)
- 177. Rearconnectors (Internalcrosspoints → Monolithicroutercrosspoint)
- 178. Router Function (Monolithic Router Crosspoint → Logical Crosspoints → Monolithic Crosspoint → Monolithic Crosspoint Sources And Destinations)
- 179. Monolithic Crosspoint Sources And Destinations (Mv-825-rtr Router Video Inputs (48) → Aux Inputs, Reserved For Future Use (2) → Internal Multiviewer Head Signals (12))
- 180. Router Function (Monolithic Crosspoint Sources And Destinations → Monolithic Crosspoint Destinations → Mv-825-rtr Router Video Outputs (48) → Mv-825-rtr Multiviewer Head Display Outputs (12) → Internal Multiviewer Tile Signals (48))
- 181. Default Routing For New Mv-825-rtr (Router Crosspoint Default Routing → Video Router Crosspoint Default Routing → Mv Input Crosspoint Default Routing → Mv Head Output Crosspoint Default Routing)
- 182. Router Function (Destination Lock / Unlock (protect / Unprotect) → Important → Lock / Unlock (protect / Unprotect) From Mv-825-rtr Web Page: → Lock / Unlock (protect / Unprotect) From A Control Panel:)
- 183. Getting Started (core Multiviewer) (Getting Started (gv Orbit) → Getting Started (router) → Mv-825-rtr Rear Connections Summary → Preliminary Mv-825-rtr Router Configuration → Initial Configuration → Routing)
- 184. Getting Started (core Multiviewer) (Getting Started (gv Orbit))
- 185. Getting Started (router) (Hardware Description → Unit Installation → Router Config And Control Web Pages → Mv-825-rtr Rear Connections Summary)
- 186. Getting Started (Preliminary Mv-825-rtr Router Configuration → Web Interface → Rollcall Control Panel → Procedure)
- 187. System Configuration (Router Config And Control Web Pages)
- 188. Getting Started (Procedure → System Network Settings → System Configuration Web Page For Router Configuration → Network Settings Changes → Caution When Two Router Network Ports Are Used → Disconnect The Mv-825-rtr From The Pc)
- 189. Initial Configuration (Routing)
- 190. Gettingstarted (Routing)
- 191. Maintenance - Hardware (Fitting Video Sfp Modules → Power Supply Units → Psu Module Removal → Psu Module Fitting → Mv-825-rtr Main Front Card → Main Front Card Removal)
- 192. Maintenance - Hardware (Fitting Video Sfp Modules → Sfp Module Types → Video Sfps (multiviewer Display Outputs) → Sfp Fiber Blanking Plug → Sfp Blank Plug → Sfp Cages)
- 193. Insertingsfps (Removingsfps)
- 194. Maintenance-hardware (Power Supply Units → Securing Screws → Air Flow → Iec Mains Inlet → Module Handle)
- 195. Mv-825-rtr Multiviewer With Integrated Router (Psu Modules → Psu Module Removal)
- 196. Maintenance - Hardware (Psu Module Fitting → Procedure)
- 197. Mv-825-rtr Main Front Card (Important → Chassis Front)
- 198. Maintenance-hardware (Mv-825-rtr Main Front Card → Ejector Levers → Card Retention Brackets → Led Status Indicators And Connectors On The Upper And Lower Front Edge Of The Main Card)
- 199. Main Front Card Removal (Important → Caution: Electrostatic Damage)
- 200. Maintenance-hardware (Main Front Card Removal → Tools Required → Procedure)
- 201. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Retention Brackets)
- 202. Maintenance-hardware (Maincardfitting → Important)
- 203. Mv-825-rtr Multiviewer With Integrated Router (Important → Caution → Electrostatic Damage → High Components)
- 204. Maintenance - Hardware (Main Card Fitting → Procedure → Items Required → To Fit A Main Card)
- 205. Mv-825-rtr Multiviewer With Integrated Router (Main Card → Chassis → Push Card → Card Inserted → Reconnect Both Mains Cords To The Mv-825-rtr Unit → Check That The Front Door-fans Are All Operating)
- 206. Main Card Fitting (Booting Up)
- 207. Maintenance Of The Core Multiviewer (Licensing For Core Multiviewer → Upgrading Core Multiviewer → Maintenance Of The Router Software → Licensing Router Software → Upgrading Router Software → Downgrading Router Software)
- 208. Maintenance Of The Core Multiviewer (Rear Core Multiviewer Ethernet Ports → Licensing For Core Multiviewer → Upgrading Core Multiviewer → Downloading Of Log Files For Core Multiviewer → Core Mv Maintenance)
- 209. Upgrading Core Multiviewer (Downloading Of Log Files For Core Multiviewer → Router Log File Formats)
- 210. Maintenance Of The Router Software (Licensing Router Software → Upgrading Router Software)
- 211. Upgrade Duration (Downgrading Router Software)
- 212. Maintenance-software (Downgradingroutersoftware)
- 213. Power (Operating Environment → Weight → Overall Dimensions)
- 214. Inputs (Outputs)
- 215. Router Video Outputs (Multiviewer Head Display → Outputs → Video Standard → Frame Rate → Reference Timing → Video Delay)
- 216. Outputs (Streaming Out → Quantity → Encoding)
- 217. Tv Standards (Video Standard → Sd Video Standards)
- 218. Reference Input (Reference Loop Out → Gpi And Ltc)
- 219. Ethernet Rear Panel Connectors (Router Control → Multiviewer Control → Default Ip Addresses → Unused Rear Panel Connectors)
- 220. Monitoring And Alarms (On-screen Monitoring → Audio Level → Metadata And Control Monitoring → Alarm Control)
- 221. Mv-825-rtrmultiviewerwithintegratedrouter (Usermanual → Videowallscreendisplay → Screendisplay → Screendesign → Controlfrom → Softwareversions)
- 222. Mv-825-rtr Specification (Software Versions)
- 223. Bunitdimensions
- 224. Unit Dimensions (Overall)
- 225. C Protocols (Sw-p-02 General Switcher Protocol → Supported Sw-p-02 Commands → Sw-p-08 General Remote Protocol → Supported Sw-p-08 Commands → Supported Commands → Input Commands)
- 226. Protocols (Supportedsw-p-02commands → Outputcommands → Tally → Connected → Extendedtally → Protectdevicenameresponse)
- 227. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Sw-p-08 General Remote Protocol → Supported Sw-p-08 Commands → Input Commands)
- 228. Protocols (Supported Sw-p-08 Commands → Output Commands → Implementation Status → Invalid Message)
- 229. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 230. Protocols (Supportedsw-p-08commands)
- 231. Configuration File (Introduction → Caution → Example Configuration File)
- 232. Configuration File (Example Configuration File → Network → Psu → Rollcall → Rollcallplus → Snmp → Swp02 → Swp08)
- 233. Persistence Settings Include: (Caution → Important → Example Persistence File)
- 234. Persistence File (Example Persistence File)
- 235. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 236. Persistence File (Example Persistence File)
- 237. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 238. Persistence File (Example Persistence File)
- 239. Routersnmpsupport (Snmpsupport(mvcore) → Snmpsupport(router) → Mv-825-rtrmibsupport → Filelisting:probel-common.mib → Filelisting:mv-825-rtr.mib → Thisappendixpresentsthesnmpsupportofthemv-825-rtr.thecoremultiviewerandtherouterofthemv-825-rtrhaveseparatemibfiles.)
- 240. Routersnmpsupport (Mv-825-rtrmibsupport → Traps → Get(readonly) → Get/set(read/write) → Destinationprotect → Routingtable)
- 241. Mv-8 Series Multiviewer (Psu1&psu2connectionstatus → Swp-02portnumber&protocolenable → Swp-08portnumber&protocolenable → Rollcallportnumber&protocolenable → Logserverenable,name&longnames → Snmpenable,communitynameforget,communitynameforset,communitynamefortraps)
- 242. Routersnmpsupport (Filelisting:probel-common.mib → Imports → Textualconventions → Nodedefinitions → Addproductoidsinhere → Endproductoids)
- 243. Mv-8 Series Multiviewer User Manual (File Listing → Mib Definitions → Router Status → Application Version → Contact Information → Description)
- 244. Routersnmpsupport (Filelisting:mv-825-rtr.mib → Versiondescriptionobject-type → Versioncopyrightobject-type → Versionbuilddateobject-type → Versionfpganumberzobject-type → Versionfirmwarerevzobject-type)
- 245. Installation (Setup → Configuration → System Standard Selection Mode → Input Information → Temperature Monitoring → Reference Standards)
- 246. Routersnmpsupport (Outputtable → Outputentry → Sourcetable → Sourceentry)
- 247. Sourceentry (Desttable → Destentry → Destentry → Sourceindex → Sourcename8 → Sourcename32)
- 248. Router Snmp Support (Catsii Settings → Mv825 Router Configuration Settings)
- 249. Router Ip Address Settings (Network/unipaddress0 → Network/unipsubnet0 → Network/unipgateway0 → Network/unipaddress1 → Network/unipsubnet1 → Network/unipgateway1)
- 250. Routersnmpsupport (Mv825controlprotocolsettings → Generalswitchersettings → Generalremotesettings → Rollcallsettings)
- 251. Rollcall Settings (Rollcall+ → Snmp Settings)
- 252. Routersnmpsupport (Debugloggingsettings → Clocksettings)
- 253. Clock/rtcsetmode (Clock/ntpserver → Clock/timezone → Traps And Events For The Mv825 Router → Destroutedsourceevent → Destprotectstateanddeviceevent → Outputstandardevent)
- 254. Router Snmp Support
- 255. Router Terminology (Association → Association Routing → Clean Switch → Crash Switch → Crosspoint Switch → Direct Audio Routing → Direct Video Routing)
- 256. Router Terminology (Router → Route → Signal → Source → Input → Output)
- 257. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Router Terminology)
- 258.
- 259. Hmultiviewerterminology
- 260. Multiviewer Terminology (Video Wall → Tile Grid For Output 1 → Tile Grid For Output 2 → Mv-825-rtr Display Output 1 → Mv-825-rtr Display Output 2 → Audio Bars Widget)
- 261. Definition Of Terms - Multiviewer (Display Output → Multiviewer Input)
- 262. Multiviewer Terminology
- 263. Contact Us (Grass Valley Technical Support → Corporate Head Office)
×
Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual
MV-825-RTR Multiviewer with Integrated Router
User Manual
Router - Router Port Configuration Screen
Router crosspoint (60x48)
The (MV-825-RTR router) Router Port Configuration control screen enables the user to
configure input and output router ports of the Router crosspoint within the MV-825-RTR
unit.
Note: The information/controls may also be shown/modified on the MV-825-RTR’s web
page. (See Chapter 7, Router Config and Control Web Pages, on page 113.)
69
| General | Details |
|---|---|
| Name | Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual |
| Make | grass valley |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual, please ask here and describe the problem in detail.
WAVLINK AC1200 WiFi AP/Router Specifications
Ridgid R860443 18-VOLT CORDLESS COMPACT ROUTER User Guide
Digital Alert Systems R232 Multi Port RF Router Installation Guide
LITE-ON WPXE8326 Wi-Fi 6E Access Point Mesh Router User Manual
MifiData MIFSPOTE5573S 4G Hotspot Wifi Router User Manual
legrand RT-20 High Performance Gigabit Router User Guide
Harvilon MT6833 5G Portable Wi-Fi Hotspot Esim Router User Guide
MSA Safety FS-ROUTER-BAC2 FieldServer BACnet Router Instructions
TP-Link NE200 Outdoor Router Installation Guide
JuniPer ACX7024 Cloud Metro Router User Guide
Table of Contents
- 1. Mv-825-rtr Multiviewer With Integrated Router User Manual →
- 2. Notices - Fcc Compliance →
- 3. Read Me First - About This Manual →
- 4. Notices - Important Safety Information →
- 5. Warnings →
- 6. Notices - Cautions →
- 7. Mesures De Sécurité Et Avis Importants - Signification Des S... →
- 8. Notices - Avertissements →
- 9. Installation De L'équipement - Vérification De La Configurat... →
- 10. Protectioncontrelesdéchargesélectrostatiques(des) - Manipula... →
- 11. Environmental Information - European (ce) Weee Directive →
- 12. Notices - Further Safety Information →
- 13. Laser Safety - Laser Safety - Fiber Output Sfp Modules Warni... →
- 14. Notices - Equipment Mains Supply Voltage →
- 15. Safety And Emc Standards - Safety Standards →
- 16. Notices - Emc Performance Of Cables And Connectors →
- 17. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 18. Page 18 →
- 19. Product Overview - Mv-825-rtr Configuration, Control And Mon... →
- 20. Notices - Environmental Considerations →
- 21. Monolithic Crosspoint Sources And Destinations - Accessing M... →
- 22. Notices - Router Function →
- 23. Appendix A Mv-825-rtr Specification - Operating Environment →
- 24. Page 24 →
- 25. Product Overview - G Sdi Video Inputs →
- 26. Product Overview - Features →
- 27. When Designing Video Wall - Flexible Alarm Capability →
- 28. Product Overview - Order Codes →
- 29. Mv-825-rtr Architecture - Inputs And Outputs →
- 30. Product Overview - Functional Block Diagram →
- 31. Router Crosspoint - Router Controller →
- 32. Product Overview - Mv-825-rtr Configuration, Control And Mon... →
- 33. Mv-8 Series Core Multiviewer - Video Wall Design →
- 34. Product Overview - Router Configuration And Control →
- 35. Mv-825-rtr Web Interface - Hardware Control Panels →
- 36. Product Overview - Software Compatibility →
- 37. Hardware Description - Chassis Overview →
- 38. Hardware Description - Chassis Overview →
- 39. Chassis Front - To Open The Front Door →
- 40. Hardware Description - Before Closing The Door →
- 41. Mv-825-rtr Multiviewer With Integrated Router - Front Indica... →
- 42. Hardware Description - Front Indicators →
- 43. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 44. Hardware Description - Rear Panel →
- 45. Rear Panel Connectors - Router Video Outputs →
- 46. Hardware Description - Rear Panel Connectors →
- 47. Rear Connectors - Hd Bnc Video Inputs →
- 48. Hardware Description - Hd Bnc Video Outputs →
- 49. Bnc Reference Connectors - Ac Mains Inlets →
- 50. Hardware Description - Ac Mains Inlets →
- 51. Multiviewer Head Display Outputs - Display Output Leds →
- 52. Hardware Description - Rear Connectors - Aux Inputs/outputs →
- 53. Rearconnectors-networkinterfaceports - Routerandmultiviewerc... →
- 54. Hardware Description - Ltc And Gpi Connector →
- 55. Mv-825-rtr Gpi Outputs - Mv-825-rtr Gpi Inputs →
- 56. Hardware Description - Ltc And Gpi Connector →
- 57. Unit Installation - Unpacking →
- 58. Unit Installation - Unpacking →
- 59. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 60. Unit Installation - Cooling Fan Failure →
- 61. Rack Mounting - Location In Rack →
- 62. Unit Installation - Mounting The Mv-825-rtr Into A Rack →
- 63. Secure The Mv-825-rtr Chassis In The Rack - Chassis Rack Mou... →
- 64. Unit Installation - Cabling Up In A Rack →
- 65. Powering - Routing →
- 66. Unit Installation - Booting Up →
- 67. The Start-up Splash Screen - Maintenance Of The Core Multivi... →
- 68. Unit Installation - Initial Connection And Configuration →
- 69. Initial Connection To The Core Multiviewer - Open Template →
- 70. Unit Installation - Core Multiviewer Initial Connection And ... →
- 71. Initial Configuration For Core Multiviewer - Network Setting... →
- 72. Unit Installation - Core Multiviewer Initial Connection And ... →
- 73. Router Initial Connection And Configuration - Default Routin... →
- 74. Unit Installation - Router Initial Connection And Configurat... →
- 75. Router Configuration Control Screens →
- 76. Unit Installation - Router Initial Connection And Configurat... →
- 77. Initial Configuration For Router (web Page) - Connection Pre... →
- 78. Unit Installation - Getting Started →
- 79. Core Mv Control Screens - Mv-8 Series Core Multiviewer User ... →
- 80. Core Mv-8 Control Screens →
- 81. Router Configuration Control Screens - Configuration Of Rout... →
- 82. Router Configuration Control Screens - Configuration Of Rout... →
- 83. Configure Mv-825-rtr Router Block - Rollcall Control Panel →
- 84. Router Configuration Control Screens - Accessing Configurati... →
- 85. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 86. Routerconfigurationcontrolscreens - Router-configurationscre... →
- 87. Router - Unit Information Screen - Rollcall Control Panel →
- 88. Routerconfigurationcontrolscreens - Router-unitinformationsc... →
- 89. Mv-825-rtr Unit Information Screen - Further Settings - Use ... →
- 90. Router Configuration Control Screens - Router - Unit Informa... →
- 91. Router - System Information Screen - System Information →
- 92. Router Configuration Control Screens - Router - System Infor... →
- 93. Router Port Configuration Screen - Router Crosspoint (60x48) →
- 94. Router Configuration Control Screens - Router - Router Port ... →
- 95. Input Ports - Output Ports →
- 96. Routerconfigurationcontrolscreens - Router-multiviewerinputp... →
- 97. Mv Input Crosspoint - Sources →
- 98. Router Configuration Control Screens - Router - Multiviewer ... →
- 99. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 100. Router Configuration Control Screens - Router - Comms Setup ... →
- 101. Comms Setup - Ip Settings - Caution →
- 102. Routerconfigurationc... - Commssetup-rollcalli... →
- 103. Comms Setup - Rollcall Items - Any Log Server →
- 104. Router Configuration Control Screens - Comms Setup - Rollcal... →
- 105. Comms Setup - Rollcall+ Items - Enable →
- 106. Routerconfigurationc... - Commssetup-snmp →
- 107. Comms Setup - Syslog (logging) - Comms Setup - Syslog Items →
- 108. Router Configuration Control Screens - Comms Setup - Restart... →
- 109. Router - Log Fields Screen - Log Fields →
- 110. Routerconfigurationc... - Router-logfieldsscre... →
- 111. Router Crosspoint Control Screens - Monolithic Overall Route... →
- 112. Router Crosspoint Control Screens - Router →
- 113. Monolithic Overall Router Crosspoint - Logical Crosspoints →
- 114. Router Crosspoint Control Screens - Monolithic Crosspoint So... →
- 115. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 116. Router Crosspoint Control Screens - Accessing Mv-825-rtr Rou... →
- 117. Mv-825-rtr Multiviewer With Integrated Router - Monolithic C... →
- 118. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 119. Destination Protect - Lock Route →
- 120. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 121. Panel Lock →
- 122. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 123. Edit Protect Tab - Protecting A Destination →
- 124. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 125. User Mode - Admin Mode →
- 126. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 127. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 128. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 129. Manage Options →
- 130. Router Crosspoint Control Screens - Routing Screen →
- 131. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 132. Router Crosspoint Control Screens - Routing Screen →
- 133. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 134. Router Crosspoint Control Screens - Simple Route With Xy Pan... →
- 135. Take Information While Routing - Simple Route With Routing S... →
- 136. Router Crosspoint Control Screens - Simple Route With Routin... →
- 137. Router Config And Control Web Pages - Open Home Web Page →
- 138. Router Config And Control Web Pages - Open Home Web Page →
- 139. Home Page - Navigation Side Bar →
- 140. Router Config And Control Web Pages - Home Page →
- 141. Router Information - System Information →
- 142. Router Config And Control Web Pages - Router Information →
- 143. Catsii Colors Page - Color Options →
- 144. Router Config And Control Web Pages - Router Crosspoint →
- 145. Make A Route In A Crosspoint - To Lock A Destination/route I... →
- 146. Router Config And Control Web Pages - Lock A Destination/rou... →
- 147. Router Crosspoint Page - Mv Input Crosspoint Page →
- 148. Router Config And Control Web Pages - Source Buttons →
- 149. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 150. Router Config And Control Web Pages - Router Crosspoint Inpu... →
- 151. Router Inputs - Internal Multiviewer Head Signals →
- 152. Router Config And Control Web Pages - Router Crosspoint Inpu... →
- 153. Router Crosspoint Outputs Page - Apply Button →
- 154. Router Config And Control Web Pages - Router Crosspoint Outp... →
- 155. Mv Input Crosspoint - Sources And Destinations →
- 156. Router Config And Control Web Pages - Routing And Locking →
- 157. Mv Input Crosspoint Page - Router Crosspoint Page →
- 158. Router Config And Control Web Pages - Mv Input Crosspoint In... →
- 159. Router Inputs - Apply Button →
- 160. Router Config And Control Web Pages - Mv Input Crosspoint Ou... →
- 161. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 162. Router Config And Control Web Pages - Mv Head Crosspoint →
- 163. Routing And Locking - Make A Route →
- 164. Router Config And Control Web Pages - Mv Head Crosspoint Pag... →
- 165. Mv Head Crosspoint Inputs - Note →
- 166. Router Config And Control Web Pages - Mv Head Crosspoint Inp... →
- 167. Mv Head Crosspoint Outputs Page - Apply Button →
- 168. Router Config And Control Web Pages - System Configuration P... →
- 169. System Configuration Page Information - Protocol Settings →
- 170. Router Config And Control Web Pages - System Configuration P... →
- 171. Apply Changes And Restart →
- 172. Router Config And Control Web Pages - About Page →
- 173. Core Mv-8 Multiviewer Features - Core Multiviewer User Manua... →
- 174. Core Mv-8 Multiviewer Features →
- 175. Router Function - Router Rear Connections →
- 176. Router Function - Router Rear Connections →
- 177. Rearconnectors - Internalcrosspoints →
- 178. Router Function - Monolithic Router Crosspoint →
- 179. Monolithic Crosspoint Sources And Destinations - Mv-825-rtr ... →
- 180. Router Function - Monolithic Crosspoint Sources And Destinat... →
- 181. Default Routing For New Mv-825-rtr - Router Crosspoint Defau... →
- 182. Router Function - Destination Lock / Unlock (protect / Unpro... →
- 183. Getting Started (core Multiviewer) - Getting Started (gv Orb... →
- 184. Getting Started (core Multiviewer) - Getting Started (gv Orb... →
- 185. Getting Started (router) - Hardware Description →
- 186. Getting Started - Preliminary Mv-825-rtr Router Configuratio... →
- 187. System Configuration - Router Config And Control Web Pages →
- 188. Getting Started - Procedure →
- 189. Initial Configuration - Routing →
- 190. Gettingstarted - Routing →
- 191. Maintenance - Hardware - Fitting Video Sfp Modules →
- 192. Maintenance - Hardware - Fitting Video Sfp Modules →
- 193. Insertingsfps - Removingsfps →
- 194. Maintenance-hardware - Power Supply Units →
- 195. Mv-825-rtr Multiviewer With Integrated Router - Psu Modules →
- 196. Maintenance - Hardware - Psu Module Fitting →
- 197. Mv-825-rtr Main Front Card - Important →
- 198. Maintenance-hardware - Mv-825-rtr Main Front Card →
- 199. Main Front Card Removal - Important →
- 200. Maintenance-hardware - Main Front Card Removal →
- 201. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 202. Maintenance-hardware - Maincardfitting →
- 203. Mv-825-rtr Multiviewer With Integrated Router - Important →
- 204. Maintenance - Hardware - Main Card Fitting →
- 205. Mv-825-rtr Multiviewer With Integrated Router - Main Card →
- 206. Main Card Fitting - Booting Up →
- 207. Maintenance Of The Core Multiviewer - Licensing For Core Mul... →
- 208. Maintenance Of The Core Multiviewer - Rear Core Multiviewer ... →
- 209. Upgrading Core Multiviewer - Downloading Of Log Files For Co... →
- 210. Maintenance Of The Router Software - Licensing Router Softwa... →
- 211. Upgrade Duration - Downgrading Router Software →
- 212. Maintenance-software - Downgradingroutersof... →
- 213. Power - Operating Environment →
- 214. Inputs - Outputs →
- 215. Router Video Outputs - Multiviewer Head Display →
- 216. Outputs - Streaming Out →
- 217. Tv Standards - Video Standard →
- 218. Reference Input - Reference Loop Out →
- 219. Ethernet Rear Panel Connectors - Router Control →
- 220. Monitoring And Alarms - On-screen Monitoring →
- 221. Mv-825-rtrmultiviewe... - Usermanual →
- 222. Mv-825-rtr Specification - Software Versions →
- 223. Bunitdimensions →
- 224. Unit Dimensions - Overall →
- 225. C Protocols - Sw-p-02 General Switcher Protocol →
- 226. Protocols - Supportedsw-p-02comm... →
- 227. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 228. Protocols - Supported Sw-p-08 Commands →
- 229. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 230. Protocols - Supportedsw-p-08comm... →
- 231. Configuration File - Introduction →
- 232. Configuration File - Example Configuration File →
- 233. Persistence Settings Include: - Caution →
- 234. Persistence File - Example Persistence File →
- 235. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 236. Persistence File - Example Persistence File →
- 237. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 238. Persistence File - Example Persistence File →
- 239. Routersnmpsupport - Snmpsupport(mvcore) →
- 240. Routersnmpsupport - Mv-825-rtrmibsupport →
- 241. Mv-8 Series Multiviewer - Psu1&psu2connections... →
- 242. Routersnmpsupport - Filelisting:probel-c... →
- 243. Mv-8 Series Multiviewer User Manual - File Listing →
- 244. Routersnmpsupport - Filelisting:mv-825-r... →
- 245. Installation - Setup →
- 246. Routersnmpsupport - Outputtable →
- 247. Sourceentry - Desttable →
- 248. Router Snmp Support - Catsii Settings →
- 249. Router Ip Address Settings - Network/unipaddress0 →
- 250. Routersnmpsupport - Mv825controlprotocol... →
- 251. Rollcall Settings - Rollcall+ →
- 252. Routersnmpsupport - Debugloggingsettings →
- 253. Clock/rtcsetmode - Clock/ntpserver →
- 254. Router Snmp Support →
- 255. Router Terminology - Association →
- 256. Router Terminology - Router →
- 257. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 258. Page 258 →
- 259. Hmultiviewerterminol... →
- 260. Multiviewer Terminology - Video Wall →
- 261. Definition Of Terms - Multiviewer - Display Output →
- 262. Multiviewer Terminology →
- 263. Contact Us - Grass Valley Technical Support →