Home > grass valley > Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual
×
- 1. Mv-825-rtr Multiviewer With Integrated Router User Manual
- 2. Notices (Fcc Compliance → Patent Information → Copyright And Trademark Notice → Terms And Conditions → Warranty Information)
- 3. Read Me First (About This Manual → Installation → Configuration → Operation → Safety Information → Related Documents)
- 4. Notices (Important Safety Information → Symbols And Their Meanings)
- 5. Warnings
- 6. Notices (Cautions → Battery Handling → Cautions For Lcd And Tft Displays)
- 7. Mesures De Sécurité Et Avis Importants (Signification Des Symboles Utilisés)
- 8. Notices (Avertissements → Identifie Une Borne De Mise À La Terre Externe → Signale La Présence De Composants Sensibles À Lélectricité Statique → Utilisez Des Procédures, Des Équipements Et Des Surfaces Antistatiques → Un Cordon Dalimentation Dûment Homologué Doit Être Utilisé → La Protection De Ce Produit Contre Les Courts-circuits)
- 9. Installation De L'équipement (Vérification De La Configuration Des Modules D'alimentation → Ventilation Adéquate → Précautions De Sécurité Avant L'entretien → Utilisation Des Fusibles Appropriés → Éviter Les Atmosphères Explosives → Mise À La Terre Avant La Mise Sous Tension)
- 10. Protectioncontrelesdéchargesélectrostatiques(des) (Manipulationdelapile → Précautionspourlesécranslcdettft)
- 11. Environmental Information (European (ce) Weee Directive → Recycling Information → Specifications Are Subject To Change Without Notice → Questions About Grass Valley Environmental And Social Involvement)
- 12. Notices (Further Safety Information → Lithium Batteries → Battery Warning → Battery Disposal)
- 13. Laser Safety (Laser Safety - Fiber Output Sfp Modules Warning → Ventilation → Caution)
- 14. Notices (Equipment Mains Supply Voltage → Mains Supply Rating For The Equipment. → Rear Mains Inlets And Mains Supply Rating → Power Cords Supplied → Power Cords Supplied For The Usa → Power Cords Supplied For Countries Other Than The Usa)
- 15. Safety And Emc Standards (Safety Standards → Emc Standards → Warning)
- 16. Notices (Emc Performance Of Cables And Connectors → Signal/data Ports → Coaxial Cables → D-type Connectors)
- 17. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Document History → Publication → Document Part Number → Document Issue And Revision → Notes)
- 18.
- 19. Product Overview (Mv-825-rtr Configuration, Control And Monitoring → Router Configuration And Control → Unit Installation → Unpacking → Safety And Emc Standards → Further Safety Information)
- 20. Notices (Environmental Considerations → Chassis Dimensions → Chassis Ventilation → Rack Mounting → Powering → Initial Connection And Configuration)
- 21. Monolithic Crosspoint Sources And Destinations (Accessing Mv-825-rtr Router Crosspoint Control Screen → Xypanel Control Screen - Routing Tab → Routing Examples → Router Config And Control Web Pages → Make A Route In A Crosspoint → Apply Changes And Restart)
- 22. Notices (Router Function → Getting Started → Preliminary Mv-825-rtr Router Configuration → Initial Configuration → Routing → Maintenance - Hardware)
- 23. Appendix A Mv-825-rtr Specification (Operating Environment → Ethernet Rear Panel Connectors → Default Ip Addresses → Monitoring And Alarms → Appendix D Configuration File → Snmp Support (router))
- 24.
- 25. Product Overview (G Sdi Video Inputs → Routed 12g Sdi Video Outputs)
- 26. Product Overview (Features → Configured Via A Web Interface → Controllable From → Internal Multiviewer → Advanced Broadcast Media Monitoring → Screen Layout Flexibility)
- 27. When Designing Video Wall (Flexible Alarm Capability → H.264 Streaming Out Of Scaled Input-copies)
- 28. Product Overview (Order Codes → Licenses → Sfp Modules (sdi Video))
- 29. Mv-825-rtr Architecture (Inputs And Outputs)
- 30. Product Overview (Functional Block Diagram → Mv-8 Series Multiviewer Core (48x12) → Video Router Crosspoint (60x48) → Router Controller → Mv Input Crosspoint (48x48) → Multiviewer Inputs (internal))
- 31. Router Crosspoint (Router Controller → Multiviewer Core → Multiviewer Input Crosspoint → Multiviewer Head Output Crosspoint → Streaming Out Of Multiviewer Input-copies)
- 32. Product Overview (Mv-825-rtr Configuration, Control And Monitoring → Video Router Block → Multiviewer Block → Mv-825-rtr Control Screen Interfaces → Configuring Of The Multiviewers Video Walls)
- 33. Mv-8 Series Core Multiviewer (Video Wall Design → Router Block → Video Reference)
- 34. Product Overview (Router Configuration And Control)
- 35. Mv-825-rtr Web Interface (Hardware Control Panels → Router Control Methods → Protocols → Snmp Support And Mib Files)
- 36. Product Overview (Software Compatibility → Unit Installation → Router Configuration Control Screens → Router Crosspoint Control Screens → Router Config And Control Web Pages → Getting Started)
- 37. Hardware Description (Chassis Overview → Chassis Front → To Open The Front Door → To Close The Front Door → Front Indicators → Rear Panel)
- 38. Hardware Description (Chassis Overview → Optical Outputs)
- 39. Chassis Front (To Open The Front Door → Door Fans → Fan Supply Wires)
- 40. Hardware Description (Before Closing The Door → To Close The Door → Caution: Close The Door)
- 41. Mv-825-rtr Multiviewer With Integrated Router (Front Indicators → Mv-825-rtr Front Main Card → Caution)
- 42. Hardware Description (Front Indicators → Sub-module → Dip Switches (engineering Use Only) → Connectors For (engineering Use Only) → Front Edge Of Card → Fan Supply Header Connectors)
- 43. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Caution: Electrostatic Damage → Contact Grass Valley Customer Support → Ensure The Chassis Front Door Is Closed And The Fans Are All Operating Correctly → Hardware Communications Fault Detected → Software Fault Detected → Mv-825-rtr Card Overheating)
- 44. Hardware Description (Rear Panel → Unit Serial Number → Important)
- 45. Rear Panel Connectors (Router Video Outputs → Router Video Inputs → Aux Inputs/outputs → Multiviewer Head Display → Multiviewer Control And Monitoring → Router Control Ethernet Ports)
- 46. Hardware Description (Rear Panel Connectors → Mv-825-rtr Rear Connectors → Bnc Reference Connectors → Multiviewer Head Display Outputs → Rear Connectors - Network Interface Ports → Ltc & Gpio)
- 47. Rear Connectors (Hd Bnc Video Inputs → Hd-bnc Connector (12g) → Connector Label And Led → Catsii Leds)
- 48. Hardware Description (Hd Bnc Video Outputs → Catsii Leds → Catsii Colors Page)
- 49. Bnc Reference Connectors (Ac Mains Inlets)
- 50. Hardware Description (Ac Mains Inlets → Psu Status Led → Psu Module Outputs → Main Output → Standby Output → Warning)
- 51. Multiviewer Head Display Outputs (Display Output Leds → Multiviewer Head Display Output Sfp Cage)
- 52. Hardware Description (Rear Connectors - Aux Inputs/outputs → Aux Inputs → Aux Outputs)
- 53. Rearconnectors-networkinterfaceports (Routerandmultiviewercontrol → Ethernetports → Linkstatusleds → Gethernetrj45s → Mv-825-rtrethernetleds → Ethernetlinkleds)
- 54. Hardware Description (Ltc And Gpi Connector → Ltc And Gpio Connector Pin-outs → Female High Density 26 Way 'd' Type Connector Assignments → Pin Number Signal)
- 55. Mv-825-rtr Gpi Outputs (Mv-825-rtr Gpi Inputs → Example: Driving Leds From The Gpi Outputs → External Circuit → Gpi Connector Pins)
- 56. Hardware Description (Ltc And Gpi Connector)
- 57. Unit Installation (Unpacking → Environmental Considerations → Chassis Dimensions → Chassis Ventilation → Rack Mounting → Initial Connection And Configuration)
- 58. Unit Installation (Unpacking → Environmental Considerations → Chassis Dimensions → Chassis Ventilation)
- 59. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Air Flow Out → Air Flow In → Caution)
- 60. Unit Installation (Cooling Fan Failure → Air Flow → Fans In Front Door → Air Flow → Cooling Fan Failure → Caution:)
- 61. Rack Mounting (Location In Rack → Mounting The Mv-825-rtr Into A Rack → Preliminaries)
- 62. Unit Installation (Mounting The Mv-825-rtr Into A Rack → Fitting The Unit)
- 63. Secure The Mv-825-rtr Chassis In The Rack (Chassis Rack Mounting Holes → Close And Secure The Front Door)
- 64. Unit Installation (Cabling Up In A Rack → Mains Power → Network Connection → Multiviewer Head Display Outputs → Initial Connection And Configuration → Booting Up)
- 65. Powering (Routing → Licensed Features → Booting Up)
- 66. Unit Installation (Booting Up → License Serial Number)
- 67. The Start-up Splash Screen (Maintenance Of The Core Multiviewer → Initial Unit Configuration → Network Interfaces → Ip Address → Sub-net Mask → Rollcall+ Domain Number)
- 68. Unit Installation (Initial Connection And Configuration → Core Multiviewer Initial Connection And Configuration → Router Initial Connection And Configuration → Connection Preparation Instructions)
- 69. Initial Connection To The Core Multiviewer (Open Template → Enter The Ip Address Of The Mv-825-rtr Units Multiviewer → Default Ip Addresses Of Mv-825-rtr Network Ports → Find Out The Ip Address Of The Mv-825-rtrs Multiviewer → The Start-up Splash Screen → Multiviewer Control Screen)
- 70. Unit Installation (Core Multiviewer Initial Connection And Configuration → Initial Configuration For Core Multiviewer → Core Mv-8 Control Screens → Banner Information In A Control Screen → Ntp Status Box → Selection Box)
- 71. Initial Configuration For Core Multiviewer (Network Settings → Output Format → System-setup Control Screen)
- 72. Unit Installation (Core Multiviewer Initial Connection And Configuration → Reference Input → System Reset → Router Initial Connection And Configuration)
- 73. Router Initial Connection And Configuration (Default Routing For New Mv-825-rtr → Connection And Configuration Methods)
- 74. Unit Installation (Router Initial Connection And Configuration → Router Initial Connection And Configuration (control Screen) → Default Ip Addresses → Initial Connection To The Router)
- 75. Router Configuration Control Screens
- 76. Unit Installation (Router Initial Connection And Configuration → Initial Configuration For Router → Important → Router Initial Connection And Configuration (web Page))
- 77. Initial Configuration For Router (web Page) (Connection Preparation Instructions → System Configuration → System-setup → System Network Settings)
- 78. Unit Installation (Getting Started → Getting Started (core Multiviewer) → Getting Started (gv Orbit) → Getting Started (router))
- 79. Core Mv Control Screens (Mv-8 Series Core Multiviewer User Manual → Control Screens For The Core Multiviewer → Information About The Core Multiviewer In The Mv-825-rtr)
- 80. Core Mv-8 Control Screens
- 81. Router Configuration Control Screens (Configuration Of Router → Configure Mv-825-rtr Router Block → Accessing Configuration Control Screen In Rollcall Control Panel → Accessing Configuration Control Screen In Gv Orbit Client → Router - Configuration Screens → Comms Setup - Ip Settings)
- 82. Router Configuration Control Screens (Configuration Of Router → Router Controller → Main Video Router → Mv Head Output Crosspoint → Mv Input Crosspoint)
- 83. Configure Mv-825-rtr Router Block (Rollcall Control Panel → Gv Orbit Client → Accessing Configuration Control Screen In Rollcall Control Panel)
- 84. Router Configuration Control Screens (Accessing Configuration Control Screen In Gv Orbit Client → Rollcall Control Screen → Open Template Dialog)
- 85. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 86. Routerconfigurationcontrolscreens (Router-configurationscreens → Selectionboxingvorbitclient → Selectionboxinrollcallcontrolpanel → Router-unitinformationscreen → Router-systeminformationscreen → Router-routerportconfigurationscreen)
- 87. Router - Unit Information Screen (Rollcall Control Panel → Read-write Information)
- 88. Routerconfigurationcontrolscreens (Router-unitinformationscreen → Softwareversion → Controllerfpgaversion → Osversion → Enclosure → Serialnumber)
- 89. Mv-825-rtr Unit Information Screen - Further Settings (Use Long Names → Time Auto Set → Ntp Server → Rollcall Log Server)
- 90. Router Configuration Control Screens (Router - Unit Information Screen → Timezone)
- 91. Router - System Information Screen (System Information → Reference)
- 92. Router Configuration Control Screens (Router - System Information Screen → Force Reference One → Force Reference Two → Auto Match)
- 93. Router Port Configuration Screen (Router Crosspoint (60x48) → Router Config And Control Web Pages)
- 94. Router Configuration Control Screens (Router - Router Port Configuration Screen → Router Crosspoint → Router Outputs (1 To 48) → Router Inputs (1 To 48) → Internal Multiviewer Head Signals (1 To 12))
- 95. Input Ports (Output Ports → Persistence)
- 96. Routerconfigurationcontrolscreens (Router-multiviewerinputportconfigurationscreen → Mvinputcrosspoint(48x48) → Multiviewerinputportconfiguration → Configureinputandoutputrouterportsofmvinputcrosspoint → Informationcontrolswebpage)
- 97. Mv Input Crosspoint (Sources → Destinations → Router - Router Port Configuration Screen → Input Ports → Output Ports)
- 98. Router Configuration Control Screens (Router - Multiviewer Head Port Configuration Screen → Mv Head Crosspoint (60x12) → Multiviewer Head Port Configuration Control Screen Enables → Configure Input And Output Router Ports → Information/controls May Also Be Shown/modified On The Units Web Page)
- 99. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Sources → Destinations → Router - Router Port Configuration Screen)
- 100. Router Configuration Control Screens (Router - Comms Setup Screen → Comms Setup - Ip → Comms Setup - Settings → Comms Setup - Snmp → Comms Setup - Rollcall Items → Comms Setup - Syslog (logging))
- 101. Comms Setup - Ip Settings (Caution → Comms Setup - Ip Port 1 And 2 Settings)
- 102. Routerconfigurationcontrolscreens (Commssetup-rollcallitems → Commssetup-ipport1and2settings → Commssetup-dnssettings)
- 103. Comms Setup - Rollcall Items (Any Log Server → Specific Log Server → Comms Setup - General)
- 104. Router Configuration Control Screens (Comms Setup - Rollcall+ → Comms Setup - General Items → General Switcher (sw-p-02) → General Remote (sw-p-08))
- 105. Comms Setup - Rollcall+ Items (Enable → Domain → Address → Note 1 → Rollcall Address)
- 106. Routerconfigurationcontrolscreens (Commssetup-snmp → Trapaddresses)
- 107. Comms Setup - Syslog (logging) (Comms Setup - Syslog Items → Enable → Logging Format → Address → Ip Port → Note 1)
- 108. Router Configuration Control Screens (Comms Setup - Restart Unit)
- 109. Router - Log Fields Screen (Log Fields → System_description → Uptime)
- 110. Routerconfigurationcontrolscreens (Router-logfieldsscreen)
- 111. Router Crosspoint Control Screens (Monolithic Overall Router Crosspoint → Monolithic Crosspoint Sources And Destinations → Accessing Mv-825-rtr Router Crosspoint Control Screen → Monolithic Crosspoint Control Screen → Xypanel Control Screen - Routing Tab → Routing Examples)
- 112. Router Crosspoint Control Screens (Router → Introduction)
- 113. Monolithic Overall Router Crosspoint (Logical Crosspoints → Monolithic Overall Crosspoint → Sources → Destinations → Monolithic Crosspoint Sources And Destinations)
- 114. Router Crosspoint Control Screens (Monolithic Crosspoint Sources And Destinations → Monolithic Crosspoint Sources → Mv-825-rtr Router Video Inputs (48) → Aux Inputs, Reserved For Future Use (2) → Internal Multiviewer Head Signals (12))
- 115. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Monolithic Crosspoint Destinations → Mv-825-rtr Router Video Outputs (48) → Mv-825-rtr Multiviewer Head Display Outputs (12) → Aux Outputs, Reserved For Future Use (2) → Internal Multiviewer Tile Signals (48))
- 116. Router Crosspoint Control Screens (Accessing Mv-825-rtr Router Crosspoint Control Screen → Rollcall Control Panel Installation Instructions → Rollcall Control Panel User Manual → Router Monolithic Crosspoint Routing Control Screen → Making Routes In The Monolithic Crosspoint → Editing Source And Destination Names)
- 117. Mv-825-rtr Multiviewer With Integrated Router (Monolithic Crosspoint Control Screen → Routing Is Initially Set To Be 1-to-1 → Selection: Xy Panel Control, And Routing Screens → Xy Panel Control Screen - Routing Tab → Routing Screen)
- 118. Router Crosspoint Control Screens (Xypanel Control Screen - Routing Tab → Xypanel Control Screen - Edit Names Tab → Xypanel Control Screen - Edit Protect Tab → Xypanel Control Screen - Options Tab → Routing → Routing Examples)
- 119. Destination Protect (Lock Route → Protected Status Of Each Destination → Routing Screen Instructions → Toggling Protected Status → Destination Buttons → Padlock Symbol Indication)
- 120. Router Crosspoint Control Screens (Xypanel Control Screen - Routing Tab → Filter Names → Clear Filter → Regex Filter)
- 121. Panel Lock
- 122. Router Crosspoint Control Screens (Xypanel Control Screen - Edit Names Tab → Edit Names Tab Enables A User To Edit The Crosspoint Source Button Names And Destination Button Names → To Edit A Source Or Destination Button Name)
- 123. Edit Protect Tab (Protecting A Destination → Unprotecting A Destination)
- 124. Router Crosspoint Control Screens (Xypanel Control Screen - Options Tab → User And Admin Mode)
- 125. User Mode (Admin Mode → Options Controls → Router Functions)
- 126. Router Crosspoint Control Screens (Xypanel Control Screen - Options Tab → Xy Panel Control Screen - Option Controls → Router Display → Popout Display)
- 127. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 128. Router Crosspoint Control Screens (Xypanel Control Screen - Options Tab → Xy Panel Control Screen - Option Controls → Panel Sizes → Button Maps)
- 129. Manage Options
- 130. Router Crosspoint Control Screens (Routing Screen → Take Mode → Destination Protect)
- 131. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Routing → Protected Destination)
- 132. Router Crosspoint Control Screens (Routing Screen → Protect Destination In Routing Screen → Destination Protected Shown In Xy Panel Control Screen)
- 133. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Routing Examples → Simple Route With Xy Panel Control Screen)
- 134. Router Crosspoint Control Screens (Simple Route With Xy Panel Control Screen → Undo Timeout Configuration)
- 135. Take Information While Routing (Simple Route With Routing Screen → Select A Destination → Select A New Source → Pre-select A Source → Click Take → Cancel A Source Pre-selection)
- 136. Router Crosspoint Control Screens (Simple Route With Routing Screen → Panel Control)
- 137. Router Config And Control Web Pages (Open Home Web Page → Navigation Side Bar → Router Information → Make A Route In A Crosspoint → Routing And Locking → System Configuration Page)
- 138. Router Config And Control Web Pages (Open Home Web Page → Ethernet Rear Panel Connectors)
- 139. Home Page (Navigation Side Bar → Rear Connection → Functional Block Diagram → System Configuration Page → Catsii Colors Page → Router Crosspoint)
- 140. Router Config And Control Web Pages (Home Page → Functional Block Diagram → Router Crosspoint Inputs Page → Router Crosspoint Page → Router Crosspoint Outputs Page → Mv Input Crosspoint Page)
- 141. Router Information (System Information → System Reference Standard)
- 142. Router Config And Control Web Pages (Router Information → System Status → Controller Dc Power Supply Status → Controller Temperature → Reference Standard One → Controller Fpga Firmware Version)
- 143. Catsii Colors Page (Color Options)
- 144. Router Config And Control Web Pages (Router Crosspoint → Sources And Destinations → Router Crosspoint Page → Router Crosspoint Inputs Page → Router Crosspoint Outputs Page)
- 145. Make A Route In A Crosspoint (To Lock A Destination/route In A Crosspoint → Lock / Unlock From The Web Page → To Lock)
- 146. Router Config And Control Web Pages (Lock A Destination/route In A Crosspoint → Routing To A Locked Destination/route → Unlock A Locked Destination/route)
- 147. Router Crosspoint Page (Mv Input Crosspoint Page → Mv Head Crosspoint Page → Functional Block Diagram → Source Buttons → Destination Buttons → Take Button)
- 148. Router Config And Control Web Pages (Source Buttons → Source Button, Shows: → Currently-routed Source (to A Selected Destination) → Pre-selected Source → Primary Quad-link Source Button → Other Members Of Quad-link Group.)
- 149. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Destination Buttons → Selected Destination → Primary Quad-link Destination Button → Other Members Of Quad-link Group)
- 150. Router Config And Control Web Pages (Router Crosspoint Inputs Page → Router Crosspoint Inputs Page → Router Inputs 1 To 48 → Multiviewer Heads 1 To 12)
- 151. Router Inputs (Internal Multiviewer Head Signals → Router Crosspoint Inputs Page)
- 152. Router Config And Control Web Pages (Router Crosspoint Inputs Page → K → Primary Quad-link → Video 32 Character Name → Video 8 Character Name)
- 153. Router Crosspoint Outputs Page (Apply Button → All Router Outputs (48) → Router Outputs 1 To 48 → Fig. 7-13: Router Crosspoint Outputs Page → Table 7-4 Describes The List Columns On The Page.)
- 154. Router Config And Control Web Pages (Router Crosspoint Outputs Page → Router Crosspoint Outputs Information → First Or Primary Quad-link In Group → Video 32 Character Name → Video 8 Character Name)
- 155. Mv Input Crosspoint (Sources And Destinations)
- 156. Router Config And Control Web Pages (Routing And Locking → Make A Route → To Lock/unlock A Route)
- 157. Mv Input Crosspoint Page (Router Crosspoint Page → Functional Block Diagram → Source Buttons → Destination Buttons → Take Button)
- 158. Router Config And Control Web Pages (Mv Input Crosspoint Inputs Page → Changes Made To Common Inputs Are Reflected In The Other Respective Web Pages. → The Page Displays A List Of Crosspoint Inputs (sources For The Crosspoint).)
- 159. Router Inputs (Apply Button → Input Settings Configuration → Confirming Pop-up Dialog → Table 7-3 Description)
- 160. Router Config And Control Web Pages (Mv Input Crosspoint Outputs Page → Apply Button → Internal Multiviewer → Input Signals → Crosspoint Outputs → Settings Changes)
- 161. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Installation → Setup → Configuration → User Interface → Troubleshooting → Specifications)
- 162. Router Config And Control Web Pages (Mv Head Crosspoint → Sources And Destinations)
- 163. Routing And Locking (Make A Route → To Lock/unlock A Route → Mv Head Crosspoint Page → Mv Head Crosspoint Inputs Page → Mv Head Crosspoint Outputs Page)
- 164. Router Config And Control Web Pages (Mv Head Crosspoint Page → Source Buttons → Destination Buttons → Take Button → Functional Block Diagram)
- 165. Mv Head Crosspoint Inputs (Note → Router Input 8 → Crosspoint Inputs → Mv-825-rtr Router Inputs → Internal Multiviewer Head Signals → All)
- 166. Router Config And Control Web Pages (Mv Head Crosspoint Inputs Page → Router Inputs → Internal Multiviewer)
- 167. Mv Head Crosspoint Outputs Page (Apply Button → All Items → External, Rear → Multiviewer Head → Display Outputs → Table 7-4 On Page 130 Describes The List Columns On The Page.)
- 168. Router Config And Control Web Pages (System Configuration Page → System Settings Are Shown On This Page And May Be Changed. → Apply Changes And Restart → Caution When Two Router Network Ports Are Used (router Ethernet Ports 1 And 2, I.e. Rear Connections Router 1 And Router 2), Then The Ports Should Be Configured To Be On Different Sub-nets For Correct Operation.)
- 169. System Configuration Page Information (Protocol Settings → Snmp → System Network Settings)
- 170. Router Config And Control Web Pages (System Configuration Page → System Files → Logging Settings)
- 171. Apply Changes And Restart
- 172. Router Config And Control Web Pages (About Page)
- 173. Core Mv-8 Multiviewer Features (Core Multiviewer User Manual → Input Alarms → Input-copy H.264 Streams → Audio Meters → Other Supported Core Mv Features)
- 174. Core Mv-8 Multiviewer Features
- 175. Router Function (Router Rear Connections → Internal Crosspoints → Monolithic Router Crosspoint → Default Routing For New Mv-825-rtr → Destination Lock / Unlock (protect / Unprotect))
- 176. Router Function (Router Rear Connections → X Video Inputs → X Video Outputs → Router Control → Video References And Loop-throughs → Introduction)
- 177. Rearconnectors (Internalcrosspoints → Monolithicroutercrosspoint)
- 178. Router Function (Monolithic Router Crosspoint → Logical Crosspoints → Monolithic Crosspoint → Monolithic Crosspoint Sources And Destinations)
- 179. Monolithic Crosspoint Sources And Destinations (Mv-825-rtr Router Video Inputs (48) → Aux Inputs, Reserved For Future Use (2) → Internal Multiviewer Head Signals (12))
- 180. Router Function (Monolithic Crosspoint Sources And Destinations → Monolithic Crosspoint Destinations → Mv-825-rtr Router Video Outputs (48) → Mv-825-rtr Multiviewer Head Display Outputs (12) → Internal Multiviewer Tile Signals (48))
- 181. Default Routing For New Mv-825-rtr (Router Crosspoint Default Routing → Video Router Crosspoint Default Routing → Mv Input Crosspoint Default Routing → Mv Head Output Crosspoint Default Routing)
- 182. Router Function (Destination Lock / Unlock (protect / Unprotect) → Important → Lock / Unlock (protect / Unprotect) From Mv-825-rtr Web Page: → Lock / Unlock (protect / Unprotect) From A Control Panel:)
- 183. Getting Started (core Multiviewer) (Getting Started (gv Orbit) → Getting Started (router) → Mv-825-rtr Rear Connections Summary → Preliminary Mv-825-rtr Router Configuration → Initial Configuration → Routing)
- 184. Getting Started (core Multiviewer) (Getting Started (gv Orbit))
- 185. Getting Started (router) (Hardware Description → Unit Installation → Router Config And Control Web Pages → Mv-825-rtr Rear Connections Summary)
- 186. Getting Started (Preliminary Mv-825-rtr Router Configuration → Web Interface → Rollcall Control Panel → Procedure)
- 187. System Configuration (Router Config And Control Web Pages)
- 188. Getting Started (Procedure → System Network Settings → System Configuration Web Page For Router Configuration → Network Settings Changes → Caution When Two Router Network Ports Are Used → Disconnect The Mv-825-rtr From The Pc)
- 189. Initial Configuration (Routing)
- 190. Gettingstarted (Routing)
- 191. Maintenance - Hardware (Fitting Video Sfp Modules → Power Supply Units → Psu Module Removal → Psu Module Fitting → Mv-825-rtr Main Front Card → Main Front Card Removal)
- 192. Maintenance - Hardware (Fitting Video Sfp Modules → Sfp Module Types → Video Sfps (multiviewer Display Outputs) → Sfp Fiber Blanking Plug → Sfp Blank Plug → Sfp Cages)
- 193. Insertingsfps (Removingsfps)
- 194. Maintenance-hardware (Power Supply Units → Securing Screws → Air Flow → Iec Mains Inlet → Module Handle)
- 195. Mv-825-rtr Multiviewer With Integrated Router (Psu Modules → Psu Module Removal)
- 196. Maintenance - Hardware (Psu Module Fitting → Procedure)
- 197. Mv-825-rtr Main Front Card (Important → Chassis Front)
- 198. Maintenance-hardware (Mv-825-rtr Main Front Card → Ejector Levers → Card Retention Brackets → Led Status Indicators And Connectors On The Upper And Lower Front Edge Of The Main Card)
- 199. Main Front Card Removal (Important → Caution: Electrostatic Damage)
- 200. Maintenance-hardware (Main Front Card Removal → Tools Required → Procedure)
- 201. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Retention Brackets)
- 202. Maintenance-hardware (Maincardfitting → Important)
- 203. Mv-825-rtr Multiviewer With Integrated Router (Important → Caution → Electrostatic Damage → High Components)
- 204. Maintenance - Hardware (Main Card Fitting → Procedure → Items Required → To Fit A Main Card)
- 205. Mv-825-rtr Multiviewer With Integrated Router (Main Card → Chassis → Push Card → Card Inserted → Reconnect Both Mains Cords To The Mv-825-rtr Unit → Check That The Front Door-fans Are All Operating)
- 206. Main Card Fitting (Booting Up)
- 207. Maintenance Of The Core Multiviewer (Licensing For Core Multiviewer → Upgrading Core Multiviewer → Maintenance Of The Router Software → Licensing Router Software → Upgrading Router Software → Downgrading Router Software)
- 208. Maintenance Of The Core Multiviewer (Rear Core Multiviewer Ethernet Ports → Licensing For Core Multiviewer → Upgrading Core Multiviewer → Downloading Of Log Files For Core Multiviewer → Core Mv Maintenance)
- 209. Upgrading Core Multiviewer (Downloading Of Log Files For Core Multiviewer → Router Log File Formats)
- 210. Maintenance Of The Router Software (Licensing Router Software → Upgrading Router Software)
- 211. Upgrade Duration (Downgrading Router Software)
- 212. Maintenance-software (Downgradingroutersoftware)
- 213. Power (Operating Environment → Weight → Overall Dimensions)
- 214. Inputs (Outputs)
- 215. Router Video Outputs (Multiviewer Head Display → Outputs → Video Standard → Frame Rate → Reference Timing → Video Delay)
- 216. Outputs (Streaming Out → Quantity → Encoding)
- 217. Tv Standards (Video Standard → Sd Video Standards)
- 218. Reference Input (Reference Loop Out → Gpi And Ltc)
- 219. Ethernet Rear Panel Connectors (Router Control → Multiviewer Control → Default Ip Addresses → Unused Rear Panel Connectors)
- 220. Monitoring And Alarms (On-screen Monitoring → Audio Level → Metadata And Control Monitoring → Alarm Control)
- 221. Mv-825-rtrmultiviewerwithintegratedrouter (Usermanual → Videowallscreendisplay → Screendisplay → Screendesign → Controlfrom → Softwareversions)
- 222. Mv-825-rtr Specification (Software Versions)
- 223. Bunitdimensions
- 224. Unit Dimensions (Overall)
- 225. C Protocols (Sw-p-02 General Switcher Protocol → Supported Sw-p-02 Commands → Sw-p-08 General Remote Protocol → Supported Sw-p-08 Commands → Supported Commands → Input Commands)
- 226. Protocols (Supportedsw-p-02commands → Outputcommands → Tally → Connected → Extendedtally → Protectdevicenameresponse)
- 227. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Sw-p-08 General Remote Protocol → Supported Sw-p-08 Commands → Input Commands)
- 228. Protocols (Supported Sw-p-08 Commands → Output Commands → Implementation Status → Invalid Message)
- 229. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 230. Protocols (Supportedsw-p-08commands)
- 231. Configuration File (Introduction → Caution → Example Configuration File)
- 232. Configuration File (Example Configuration File → Network → Psu → Rollcall → Rollcallplus → Snmp → Swp02 → Swp08)
- 233. Persistence Settings Include: (Caution → Important → Example Persistence File)
- 234. Persistence File (Example Persistence File)
- 235. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 236. Persistence File (Example Persistence File)
- 237. Mv-825-rtr Multiviewer With Integrated Router (User Manual)
- 238. Persistence File (Example Persistence File)
- 239. Routersnmpsupport (Snmpsupport(mvcore) → Snmpsupport(router) → Mv-825-rtrmibsupport → Filelisting:probel-common.mib → Filelisting:mv-825-rtr.mib → Thisappendixpresentsthesnmpsupportofthemv-825-rtr.thecoremultiviewerandtherouterofthemv-825-rtrhaveseparatemibfiles.)
- 240. Routersnmpsupport (Mv-825-rtrmibsupport → Traps → Get(readonly) → Get/set(read/write) → Destinationprotect → Routingtable)
- 241. Mv-8 Series Multiviewer (Psu1&psu2connectionstatus → Swp-02portnumber&protocolenable → Swp-08portnumber&protocolenable → Rollcallportnumber&protocolenable → Logserverenable,name&longnames → Snmpenable,communitynameforget,communitynameforset,communitynamefortraps)
- 242. Routersnmpsupport (Filelisting:probel-common.mib → Imports → Textualconventions → Nodedefinitions → Addproductoidsinhere → Endproductoids)
- 243. Mv-8 Series Multiviewer User Manual (File Listing → Mib Definitions → Router Status → Application Version → Contact Information → Description)
- 244. Routersnmpsupport (Filelisting:mv-825-rtr.mib → Versiondescriptionobject-type → Versioncopyrightobject-type → Versionbuilddateobject-type → Versionfpganumberzobject-type → Versionfirmwarerevzobject-type)
- 245. Installation (Setup → Configuration → System Standard Selection Mode → Input Information → Temperature Monitoring → Reference Standards)
- 246. Routersnmpsupport (Outputtable → Outputentry → Sourcetable → Sourceentry)
- 247. Sourceentry (Desttable → Destentry → Destentry → Sourceindex → Sourcename8 → Sourcename32)
- 248. Router Snmp Support (Catsii Settings → Mv825 Router Configuration Settings)
- 249. Router Ip Address Settings (Network/unipaddress0 → Network/unipsubnet0 → Network/unipgateway0 → Network/unipaddress1 → Network/unipsubnet1 → Network/unipgateway1)
- 250. Routersnmpsupport (Mv825controlprotocolsettings → Generalswitchersettings → Generalremotesettings → Rollcallsettings)
- 251. Rollcall Settings (Rollcall+ → Snmp Settings)
- 252. Routersnmpsupport (Debugloggingsettings → Clocksettings)
- 253. Clock/rtcsetmode (Clock/ntpserver → Clock/timezone → Traps And Events For The Mv825 Router → Destroutedsourceevent → Destprotectstateanddeviceevent → Outputstandardevent)
- 254. Router Snmp Support
- 255. Router Terminology (Association → Association Routing → Clean Switch → Crash Switch → Crosspoint Switch → Direct Audio Routing → Direct Video Routing)
- 256. Router Terminology (Router → Route → Signal → Source → Input → Output)
- 257. Mv-825-rtr Multiviewer With Integrated Router (User Manual → Router Terminology)
- 258.
- 259. Hmultiviewerterminology
- 260. Multiviewer Terminology (Video Wall → Tile Grid For Output 1 → Tile Grid For Output 2 → Mv-825-rtr Display Output 1 → Mv-825-rtr Display Output 2 → Audio Bars Widget)
- 261. Definition Of Terms - Multiviewer (Display Output → Multiviewer Input)
- 262. Multiviewer Terminology
- 263. Contact Us (Grass Valley Technical Support → Corporate Head Office)
×
Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual
Router Config and Control Web Pages
MV Head Crosspoint Page
MV Head Crosspoint Page
Note: This crosspoint page is similar to the Router Crosspoint Page. See
the Router Crosspoint Page for more information.
This page enables a user to make routes with the MV Head crosspoint in the MV-825-RTR.
(The router/crosspoint architecture of the MV-825-RTR is described in Functional Block
Diagram, on page 6.)
Source buttons
Destination buttons
Take button
Fig. 7-19: MV Head Crosspoint Page
140
| General | Details |
|---|---|
| Name | Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual |
| Make | grass valley |
| Language | English |
| Filetype | PDF (Download) |
| File size | MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual, please ask here and describe the problem in detail.
ozito PXBLTS Trim Router Instruction Manual
JUNIPER NETWORKS PTX10004 Packet Transport Router User Guide
WIND telecom Surf-i TD-LTE 4G Wireless Router User Manual
MMB NETWORKS MMB Thread Border Router User Guide
SIEMENS PXG3.L BACnet Router Instruction Manual
DrayTek VigorLTE 200 Series LTE Router User Guide
NIRAD Networks N200-I-SDWAN-EDGE EDGE Router Installation Guide
verizon CR100A Wireless Router User Guide
SMAWAVE SRP620-B 5G IP67 Ruggedized Router User Guide
REYEE RG-E4 Networking Router Installation Guide
Table of Contents
- 1. Mv-825-rtr Multiviewer With Integrated Router User Manual →
- 2. Notices - Fcc Compliance →
- 3. Read Me First - About This Manual →
- 4. Notices - Important Safety Information →
- 5. Warnings →
- 6. Notices - Cautions →
- 7. Mesures De Sécurité Et Avis Importants - Signification Des S... →
- 8. Notices - Avertissements →
- 9. Installation De L'équipement - Vérification De La Configurat... →
- 10. Protectioncontrelesdéchargesélectrostatiques(des) - Manipula... →
- 11. Environmental Information - European (ce) Weee Directive →
- 12. Notices - Further Safety Information →
- 13. Laser Safety - Laser Safety - Fiber Output Sfp Modules Warni... →
- 14. Notices - Equipment Mains Supply Voltage →
- 15. Safety And Emc Standards - Safety Standards →
- 16. Notices - Emc Performance Of Cables And Connectors →
- 17. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 18. Page 18 →
- 19. Product Overview - Mv-825-rtr Configuration, Control And Mon... →
- 20. Notices - Environmental Considerations →
- 21. Monolithic Crosspoint Sources And Destinations - Accessing M... →
- 22. Notices - Router Function →
- 23. Appendix A Mv-825-rtr Specification - Operating Environment →
- 24. Page 24 →
- 25. Product Overview - G Sdi Video Inputs →
- 26. Product Overview - Features →
- 27. When Designing Video Wall - Flexible Alarm Capability →
- 28. Product Overview - Order Codes →
- 29. Mv-825-rtr Architecture - Inputs And Outputs →
- 30. Product Overview - Functional Block Diagram →
- 31. Router Crosspoint - Router Controller →
- 32. Product Overview - Mv-825-rtr Configuration, Control And Mon... →
- 33. Mv-8 Series Core Multiviewer - Video Wall Design →
- 34. Product Overview - Router Configuration And Control →
- 35. Mv-825-rtr Web Interface - Hardware Control Panels →
- 36. Product Overview - Software Compatibility →
- 37. Hardware Description - Chassis Overview →
- 38. Hardware Description - Chassis Overview →
- 39. Chassis Front - To Open The Front Door →
- 40. Hardware Description - Before Closing The Door →
- 41. Mv-825-rtr Multiviewer With Integrated Router - Front Indica... →
- 42. Hardware Description - Front Indicators →
- 43. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 44. Hardware Description - Rear Panel →
- 45. Rear Panel Connectors - Router Video Outputs →
- 46. Hardware Description - Rear Panel Connectors →
- 47. Rear Connectors - Hd Bnc Video Inputs →
- 48. Hardware Description - Hd Bnc Video Outputs →
- 49. Bnc Reference Connectors - Ac Mains Inlets →
- 50. Hardware Description - Ac Mains Inlets →
- 51. Multiviewer Head Display Outputs - Display Output Leds →
- 52. Hardware Description - Rear Connectors - Aux Inputs/outputs →
- 53. Rearconnectors-networkinterfaceports - Routerandmultiviewerc... →
- 54. Hardware Description - Ltc And Gpi Connector →
- 55. Mv-825-rtr Gpi Outputs - Mv-825-rtr Gpi Inputs →
- 56. Hardware Description - Ltc And Gpi Connector →
- 57. Unit Installation - Unpacking →
- 58. Unit Installation - Unpacking →
- 59. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 60. Unit Installation - Cooling Fan Failure →
- 61. Rack Mounting - Location In Rack →
- 62. Unit Installation - Mounting The Mv-825-rtr Into A Rack →
- 63. Secure The Mv-825-rtr Chassis In The Rack - Chassis Rack Mou... →
- 64. Unit Installation - Cabling Up In A Rack →
- 65. Powering - Routing →
- 66. Unit Installation - Booting Up →
- 67. The Start-up Splash Screen - Maintenance Of The Core Multivi... →
- 68. Unit Installation - Initial Connection And Configuration →
- 69. Initial Connection To The Core Multiviewer - Open Template →
- 70. Unit Installation - Core Multiviewer Initial Connection And ... →
- 71. Initial Configuration For Core Multiviewer - Network Setting... →
- 72. Unit Installation - Core Multiviewer Initial Connection And ... →
- 73. Router Initial Connection And Configuration - Default Routin... →
- 74. Unit Installation - Router Initial Connection And Configurat... →
- 75. Router Configuration Control Screens →
- 76. Unit Installation - Router Initial Connection And Configurat... →
- 77. Initial Configuration For Router (web Page) - Connection Pre... →
- 78. Unit Installation - Getting Started →
- 79. Core Mv Control Screens - Mv-8 Series Core Multiviewer User ... →
- 80. Core Mv-8 Control Screens →
- 81. Router Configuration Control Screens - Configuration Of Rout... →
- 82. Router Configuration Control Screens - Configuration Of Rout... →
- 83. Configure Mv-825-rtr Router Block - Rollcall Control Panel →
- 84. Router Configuration Control Screens - Accessing Configurati... →
- 85. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 86. Routerconfigurationcontrolscreens - Router-configurationscre... →
- 87. Router - Unit Information Screen - Rollcall Control Panel →
- 88. Routerconfigurationcontrolscreens - Router-unitinformationsc... →
- 89. Mv-825-rtr Unit Information Screen - Further Settings - Use ... →
- 90. Router Configuration Control Screens - Router - Unit Informa... →
- 91. Router - System Information Screen - System Information →
- 92. Router Configuration Control Screens - Router - System Infor... →
- 93. Router Port Configuration Screen - Router Crosspoint (60x48) →
- 94. Router Configuration Control Screens - Router - Router Port ... →
- 95. Input Ports - Output Ports →
- 96. Routerconfigurationcontrolscreens - Router-multiviewerinputp... →
- 97. Mv Input Crosspoint - Sources →
- 98. Router Configuration Control Screens - Router - Multiviewer ... →
- 99. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 100. Router Configuration Control Screens - Router - Comms Setup ... →
- 101. Comms Setup - Ip Settings - Caution →
- 102. Routerconfigurationc... - Commssetup-rollcalli... →
- 103. Comms Setup - Rollcall Items - Any Log Server →
- 104. Router Configuration Control Screens - Comms Setup - Rollcal... →
- 105. Comms Setup - Rollcall+ Items - Enable →
- 106. Routerconfigurationc... - Commssetup-snmp →
- 107. Comms Setup - Syslog (logging) - Comms Setup - Syslog Items →
- 108. Router Configuration Control Screens - Comms Setup - Restart... →
- 109. Router - Log Fields Screen - Log Fields →
- 110. Routerconfigurationc... - Router-logfieldsscre... →
- 111. Router Crosspoint Control Screens - Monolithic Overall Route... →
- 112. Router Crosspoint Control Screens - Router →
- 113. Monolithic Overall Router Crosspoint - Logical Crosspoints →
- 114. Router Crosspoint Control Screens - Monolithic Crosspoint So... →
- 115. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 116. Router Crosspoint Control Screens - Accessing Mv-825-rtr Rou... →
- 117. Mv-825-rtr Multiviewer With Integrated Router - Monolithic C... →
- 118. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 119. Destination Protect - Lock Route →
- 120. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 121. Panel Lock →
- 122. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 123. Edit Protect Tab - Protecting A Destination →
- 124. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 125. User Mode - Admin Mode →
- 126. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 127. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 128. Router Crosspoint Control Screens - Xypanel Control Screen -... →
- 129. Manage Options →
- 130. Router Crosspoint Control Screens - Routing Screen →
- 131. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 132. Router Crosspoint Control Screens - Routing Screen →
- 133. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 134. Router Crosspoint Control Screens - Simple Route With Xy Pan... →
- 135. Take Information While Routing - Simple Route With Routing S... →
- 136. Router Crosspoint Control Screens - Simple Route With Routin... →
- 137. Router Config And Control Web Pages - Open Home Web Page →
- 138. Router Config And Control Web Pages - Open Home Web Page →
- 139. Home Page - Navigation Side Bar →
- 140. Router Config And Control Web Pages - Home Page →
- 141. Router Information - System Information →
- 142. Router Config And Control Web Pages - Router Information →
- 143. Catsii Colors Page - Color Options →
- 144. Router Config And Control Web Pages - Router Crosspoint →
- 145. Make A Route In A Crosspoint - To Lock A Destination/route I... →
- 146. Router Config And Control Web Pages - Lock A Destination/rou... →
- 147. Router Crosspoint Page - Mv Input Crosspoint Page →
- 148. Router Config And Control Web Pages - Source Buttons →
- 149. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 150. Router Config And Control Web Pages - Router Crosspoint Inpu... →
- 151. Router Inputs - Internal Multiviewer Head Signals →
- 152. Router Config And Control Web Pages - Router Crosspoint Inpu... →
- 153. Router Crosspoint Outputs Page - Apply Button →
- 154. Router Config And Control Web Pages - Router Crosspoint Outp... →
- 155. Mv Input Crosspoint - Sources And Destinations →
- 156. Router Config And Control Web Pages - Routing And Locking →
- 157. Mv Input Crosspoint Page - Router Crosspoint Page →
- 158. Router Config And Control Web Pages - Mv Input Crosspoint In... →
- 159. Router Inputs - Apply Button →
- 160. Router Config And Control Web Pages - Mv Input Crosspoint Ou... →
- 161. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 162. Router Config And Control Web Pages - Mv Head Crosspoint →
- 163. Routing And Locking - Make A Route →
- 164. Router Config And Control Web Pages - Mv Head Crosspoint Pag... →
- 165. Mv Head Crosspoint Inputs - Note →
- 166. Router Config And Control Web Pages - Mv Head Crosspoint Inp... →
- 167. Mv Head Crosspoint Outputs Page - Apply Button →
- 168. Router Config And Control Web Pages - System Configuration P... →
- 169. System Configuration Page Information - Protocol Settings →
- 170. Router Config And Control Web Pages - System Configuration P... →
- 171. Apply Changes And Restart →
- 172. Router Config And Control Web Pages - About Page →
- 173. Core Mv-8 Multiviewer Features - Core Multiviewer User Manua... →
- 174. Core Mv-8 Multiviewer Features →
- 175. Router Function - Router Rear Connections →
- 176. Router Function - Router Rear Connections →
- 177. Rearconnectors - Internalcrosspoints →
- 178. Router Function - Monolithic Router Crosspoint →
- 179. Monolithic Crosspoint Sources And Destinations - Mv-825-rtr ... →
- 180. Router Function - Monolithic Crosspoint Sources And Destinat... →
- 181. Default Routing For New Mv-825-rtr - Router Crosspoint Defau... →
- 182. Router Function - Destination Lock / Unlock (protect / Unpro... →
- 183. Getting Started (core Multiviewer) - Getting Started (gv Orb... →
- 184. Getting Started (core Multiviewer) - Getting Started (gv Orb... →
- 185. Getting Started (router) - Hardware Description →
- 186. Getting Started - Preliminary Mv-825-rtr Router Configuratio... →
- 187. System Configuration - Router Config And Control Web Pages →
- 188. Getting Started - Procedure →
- 189. Initial Configuration - Routing →
- 190. Gettingstarted - Routing →
- 191. Maintenance - Hardware - Fitting Video Sfp Modules →
- 192. Maintenance - Hardware - Fitting Video Sfp Modules →
- 193. Insertingsfps - Removingsfps →
- 194. Maintenance-hardware - Power Supply Units →
- 195. Mv-825-rtr Multiviewer With Integrated Router - Psu Modules →
- 196. Maintenance - Hardware - Psu Module Fitting →
- 197. Mv-825-rtr Main Front Card - Important →
- 198. Maintenance-hardware - Mv-825-rtr Main Front Card →
- 199. Main Front Card Removal - Important →
- 200. Maintenance-hardware - Main Front Card Removal →
- 201. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 202. Maintenance-hardware - Maincardfitting →
- 203. Mv-825-rtr Multiviewer With Integrated Router - Important →
- 204. Maintenance - Hardware - Main Card Fitting →
- 205. Mv-825-rtr Multiviewer With Integrated Router - Main Card →
- 206. Main Card Fitting - Booting Up →
- 207. Maintenance Of The Core Multiviewer - Licensing For Core Mul... →
- 208. Maintenance Of The Core Multiviewer - Rear Core Multiviewer ... →
- 209. Upgrading Core Multiviewer - Downloading Of Log Files For Co... →
- 210. Maintenance Of The Router Software - Licensing Router Softwa... →
- 211. Upgrade Duration - Downgrading Router Software →
- 212. Maintenance-software - Downgradingroutersof... →
- 213. Power - Operating Environment →
- 214. Inputs - Outputs →
- 215. Router Video Outputs - Multiviewer Head Display →
- 216. Outputs - Streaming Out →
- 217. Tv Standards - Video Standard →
- 218. Reference Input - Reference Loop Out →
- 219. Ethernet Rear Panel Connectors - Router Control →
- 220. Monitoring And Alarms - On-screen Monitoring →
- 221. Mv-825-rtrmultiviewe... - Usermanual →
- 222. Mv-825-rtr Specification - Software Versions →
- 223. Bunitdimensions →
- 224. Unit Dimensions - Overall →
- 225. C Protocols - Sw-p-02 General Switcher Protocol →
- 226. Protocols - Supportedsw-p-02comm... →
- 227. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 228. Protocols - Supported Sw-p-08 Commands →
- 229. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 230. Protocols - Supportedsw-p-08comm... →
- 231. Configuration File - Introduction →
- 232. Configuration File - Example Configuration File →
- 233. Persistence Settings Include: - Caution →
- 234. Persistence File - Example Persistence File →
- 235. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 236. Persistence File - Example Persistence File →
- 237. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 238. Persistence File - Example Persistence File →
- 239. Routersnmpsupport - Snmpsupport(mvcore) →
- 240. Routersnmpsupport - Mv-825-rtrmibsupport →
- 241. Mv-8 Series Multiviewer - Psu1&psu2connections... →
- 242. Routersnmpsupport - Filelisting:probel-c... →
- 243. Mv-8 Series Multiviewer User Manual - File Listing →
- 244. Routersnmpsupport - Filelisting:mv-825-r... →
- 245. Installation - Setup →
- 246. Routersnmpsupport - Outputtable →
- 247. Sourceentry - Desttable →
- 248. Router Snmp Support - Catsii Settings →
- 249. Router Ip Address Settings - Network/unipaddress0 →
- 250. Routersnmpsupport - Mv825controlprotocol... →
- 251. Rollcall Settings - Rollcall+ →
- 252. Routersnmpsupport - Debugloggingsettings →
- 253. Clock/rtcsetmode - Clock/ntpserver →
- 254. Router Snmp Support →
- 255. Router Terminology - Association →
- 256. Router Terminology - Router →
- 257. Mv-825-rtr Multiviewer With Integrated Router - User Manual →
- 258. Page 258 →
- 259. Hmultiviewerterminol... →
- 260. Multiviewer Terminology - Video Wall →
- 261. Definition Of Terms - Multiviewer - Display Output →
- 262. Multiviewer Terminology →
- 263. Contact Us - Grass Valley Technical Support →