Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual

MV-825-RTR Multiviewer with Integrated Router  

User Manual  

Initial MV-825-RTR router connection and configuration should be carried out on a separate  

IT network, separate from any house IT network. The initial configuration sets up the MV-  

825-RTR’s router block - IP addresses, communication settings etc.  

Note: Router Control Ethernet port:  

Typically, a new MV-825-RTR will be using a default IP address (see  

Default IP Addresses, on page 195) on rear Ethernet port ‘Router 1’  

(on the ‘Comms Setup’ MV-825-RTR router control screen).  

To prepare a computer for initial connection:  

1 Connecting to rear Ethernet port ‘Router 1’ on the MV-825-RTR,   

follow the preparation instructions at Connection Preparation Instructions, on page 44.  

Then:  

2 Enter the IP address of the router into the web browser.  

The MV-825-RTR router control ‘Home’ web page is shown.  

Initial Configuration for Router (Web Page)  

The initial configuration of the core multiviewer includes setting up:  

• MV-825-RTR router IP addresses, and  

• communication settings.  

After initial configuration, the MV-825-RTR unit may be connected to the house IT network  

and all remaining MV-825-RTR router configuration settings can be set up.  

To do initial configuration via the web page:  

1 Navigate to the System Configuration web page.  

(For a description of the control screen, see Chapter 7, System Configuration Page, on  

page 144.)  

In the System-Setup control screen:  

2 Change the System Network Settings for the MV-825-RTR’s ‘router control’network  

interfaces.   

Modify:  

• IP Address.  

• Subnet mask.  

• Default Gateway IP address.  

Once all setting changes in the System-Setup template have been done:  

3 Click on the Restart Unit button at the top of the System Configuration web page.  

IMPORTANT  

A unit restart is required before saved settings changes in the System  

Configuration web page take effect.  

Such a reset will affect the MV-825-RTR internal core multiviewer and  

router.  

When the MV-825-RTR has re-started, the new settings for the multiviewer and for the  

router will be adopted by the MV-825-RTR.  

53  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual
Make	grass valley
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• grass valley

Questions and Answers (0)

If you have any questions regarding Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual, please ask here and describe the problem in detail.