Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual

Getting Started  

Preliminary MV-825-RTR Router Configuration  

Preliminary MV-825-RTR Router Configuration  

The MV-825-RTR unit initially requires some network settings to be set up. The network  

settings may be set up via either of the following unit interfaces:  

• Web Interface  

- see Router Config and Control Web Pages, on page 113.  

or  

• RollCall Control Panel  

- see Router Configuration Control Screens, on page 57.  

Here, the web interface is used to describe the preliminary configuration procedure.  

You will require:  

• A PC with a network port configured with a static IP address on the same sub-net as the  

MV-825-RTR unit (255.255.0.0).   

Do not use the same IP address as the router default IP address. (Default IP addresses  

are listed in Ethernet Rear Panel Connectors, on page 195.)  

• A standard CAT 5 network cable.   

(Older PCs may require a cross-over network cable instead.)  

Procedure  

1 Connect the CAT5 network cable to the RJ45 1GbE Router 1 “Ethernet”port on the rear  

of the unit.  

Connect the other end of the CAT5 cable to the PC’s configured network port.  

2 Open a web browser on the PC.  

3 Enter the default IP address of the MV-825-RTR’s router block. (Default IP addresses are  

listed in Ethernet Rear Panel Connectors, on page 195.)  

The MV-825-RTR’s router home web page is shown in the browser, see Figure 10-2.  

162  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual
Make	grass valley
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• grass valley

Questions and Answers (0)

If you have any questions regarding Grass Valley MV-825-RTRUM Multiviewer with Integrated Router User Manual, please ask here and describe the problem in detail.