KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

Enabling Learning Mode to Auto Start  

If Learn Ready reports NOT READY because of currently unfavorable  

temperatures, you may enable the AFMS to automatically start Learning Mode  

when it detects favorable temperatures later (overnight is likely).  

1. Leave Min Delta Temp set to the default or adjust it if needed.  

NOTE: If the ΔT becomes less than Min Delta Temp, the AFMS controller will  

abort Learning Mode. This is to ensure that the controller does not  

receive unusable learning samples. Setting Min Delta Temp at a 15°F or  

larger difference is recommended.  

2. Leave Auto Start Delta Temp set to the default, or adjust it if needed.  

NOTE: When the ΔT reaches the Auto Start Delta Temp, Learning Mode will  

start. Learning Mode will complete if the ΔT remains greater than the  

Min Delta Temp for the entire duration. An Auto Start Delta Temp that is  

at least 20°F more than Min Delta Temp is recommended.  

3. Leave Time Between Samples (Seconds) set to the default or adjust it if  

needed.  

NOTE: Most often, Time Between Samples (Seconds) can be left on the default  

(60 seconds). You might increase the value if the damper Stroke Time  

is longer than that of a typical unit, or if the damper actuator requires  

extra time to respond.  

4. For Auto Learn Enable, select ON.  

5. Click Save.  

6. Wait for Learning Mode to complete during favorable temperatures  

(overnight is likely).  

Skip to Verify Learning Mode Completed and Record Date on page 10.  

Verify that AFMS Status is in Learning Mode  

On the Monitor page, in the Operation group, verify whether AFMS Status reports  

LEARN MODE.  

Verify Learning Mode Completed and Record Date  

After the AFMS completes Learning Mode (approximately 2 hours), on the Learn  

page:  

1. Locate the Date of Last Learn (YYMMDD).  

2. Enter the date into the Note Sheets for AFMS Checkout and Commissioning.  

Skip to Access the AFMS Table and Record Data on page 11.  

10  

BAC-5051(A)E Pages for Configuring an AFMS, AG230819C  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide
Make	KMC CONTROLS
Language	English
Filetype	PDF (Download)
File size	0.27 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• KMC CONTROLS

Questions and Answers (0)

If you have any questions regarding KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide, please ask here and describe the problem in detail.