KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

POINT-TO-POINT CHECKOUT TASKS  

The steps for each point-to-point checkout task are presented in subsections  

below. Complete each task/subsection in the order presented.  

Set Control Mode to Damper Position Control  

On the Configure page, in the System Setup group:  

1. For Control Mode, select DMPR POSITION CTRL from the drop-down menu.  

2. Click Save.  

Verify Pressure Transducer Settings  

Do the following for all pressure transducers (supply and pressure assist) that  

were installed, following their manufacturer’s installation instructions:  

1. Verify that the signal output type is set to volts.  

2. Verify that the transducer is set to unipolar mode.  

3. If the transducer has several pressure range options, verify that the correct  

range is set (according to the pressure range of the unit).  

Make Pressure Transducer Zero Adjustment  

Zero out all pressure transducers (supply and pressure assist) that were  

installed, following their manufacturer’s installation instructions.  

You will need to expose the transducer high and low ports to ambient pressure  

by temporarily removing the tubing from the ports. After zeroing the transducer,  

reconnect each tube to the correct port.  

Set the Supply Air Differential Pressure Range (5901-  

AFMS only)  

On the Configure page, in the General group:  

1. For SA DP Range, enter the maximum inches of water column that the  

supply air pressure transducer can measure.  

NOTE: For example, a TPE-1475-21, can measure up to 2” wc, so enter 2. A  

TPE-1475-22 can measure up to 10” wc, so enter 10. (A 9311-AFMS can  

measure up to 2” wc.) Some AFMS installations may use other pressure  

transducers.  

2. Click Save.  

BAC-5051(A)E Pages for Configuring an AFMS, AG230819C  

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide
Make	KMC CONTROLS
Language	English
Filetype	PDF (Download)
File size	0.27 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• KMC CONTROLS

Questions and Answers (0)

If you have any questions regarding KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide, please ask here and describe the problem in detail.