KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

10. Once the actuator stops moving, visibly verify that the damper is fully open.  

If the actuator is moving the damper in reverse (i.e. 10 volts = closed), see the  

next section, “Set Damper Reverse Action”.  

Set Damper Reverse Action (if needed)  

If visual inspection (see the previous section) revealed that the damper actuator  

moves in reverse action (i.e. 10 volts = closed), on the Configure page, in the  

Damper group:  

1. For Damper Reverse Action, select REVERSE from the drop-down menu.  

2. Click Save.  

(if needed)  

Stroke Damper and Verify that Reported Damper Position  

Follows  

1. Go to Configure > the System Setup group:  

2. Ensure that DMPR POSITION is set for Control Mode.  

3. For Damper Setpoint, enter 0.  

4. Click Save.  

5. Once the actuator stops moving, visibly verify that the damper is fully  

closed.  

6. Go to the Monitor tab.  

7. Verify that Damper Position (in the Operation group) reports a value within  

±1% of 0.  

NOTE: The inclinometer can detect very small movements of the damper  

assembly.  

8. Go to the Configure tab again.  

9. For Damper Setpoint, enter 50.  

10. Click Save.  

11. Once the actuator stops moving, visibly verify that the damper is 50% open/  

closed.  

12. Go to the Monitor tab again.\  

13. Verify that Damper Position reports a value within ±1% of 50.  

14. Go to the Configure tab again.  

15. For Damper Setpoint, enter 100.  

16. Click Save.  

17. Once the actuator stops moving, visibly verify that the damper is now fully  

open.  

BAC-5051(A)E Pages for Configuring an AFMS, AG230819C  

7

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide
Make	KMC CONTROLS
Language	English
Filetype	PDF (Download)
File size	0.27 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• KMC CONTROLS

Questions and Answers (0)

If you have any questions regarding KMC Controls BAC-5051 TRUEFIT Measurement System Router User Guide, please ask here and describe the problem in detail.