FLEX FX4221 24V Trim Router Instruction Manual
INTERNAL ROUTING (FIG. 26)
Fig. 26
1. With the cutting depth set, tilt the tool and
place it on the workpiece, with only the leading
edge of the subbase contacting the workpiece.
2. Turn on the tool and allow it to reach its full
speed, being careful not to allow the cutter bit
to contact the workpiece.
3. To begin the cut, gradually feed the cutter bit
into the workpiece until the subbase is level
with the workpiece, then move the router to
make the cut.
4. When the cut is completed, turn off the tool
and allow the cutter bit to come to a complete
stop before removing it from the workpiece.
Fig. 27
3
5. Remove battery pack and place the tool
upside down on the worktable and inspect the
finished cut.
1
-
Feed
Always clamp the
WARNING
2
Bit Rotation
workpiece securely and
keep a firm grip on the tool base with both
hands at all times. Failure to do so could result
in loss of control, causing possibly serious
personal injury.
4
Feed
FEEDING THE TRIM ROUTER (FIG. 27)
Fig. 27a
When routing or doing related work, the best
finishes will result from setting up the cut
carefully, selecting the proper cutting depth,
knowing how the cutter bit reacts in the
workpiece, and selecting the appropriate rate
and direction of feed for the project.
Thrust
Bit Rotation
Direction of Feed for External Cuts (Fig. 27a)
The cutter bit rotates clockwise. This means that
feeding the bit from left to right will cause the bit
to pull the tool toward the workpiece.
Feed
Guide
If the tool is fed in the opposite direction (right to
left), the rotating force of the cutter bit will tend
to push the bit away from the workpiece. This is
called “climb-cutting”.
Fig. 27b
“Climb-cutting” may cause loss of control,
resulting in possibly personal injury. When
“climb-cutting” is required, exercise extreme
caution to maintain control of the tool.
Guide
Thrust
Bit Rotation
Feed
-22-
| General | Details |
|---|---|
| Name | FLEX FX4221 24V Trim Router Instruction Manual |
| Make | FLEX |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.88 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding FLEX FX4221 24V Trim Router Instruction Manual, please ask here and describe the problem in detail.
ASUS GT-AX11000 Tri Band Gaming Router Instruction Manual
TUBBUTEC TRS Bridge 4×4 TRS Midi Router User Guide
GL iNet GL-B3000/Marbel AX3000 Wireless Router User Manual
TP-Link Archer MR505 Wireless Dual Band Gigabit Router Installation Guide
GL iNet GL-A1300 AC1300 Gigabit Wireless Router User Guide
more eero 6+ TrueMesh Wi-Fi 6 Dual-Band Router User Guide
Doonink FW40-WIFI Wi-Fi Router User Manual
Juniper NETWORKS SSR1300 Router User Guide
Juniper NETWORKS ACX7509 Cloud Metro Router User Guide
KMC CONTROLS BAC-5051AE BACnet Router Owner’s Manual