FLEX FX4221 24V Trim Router Instruction Manual
Direction of Feed for Internal Cuts (Fig. 27b)
Fig. 27c
When making an internal cut, such as groove,
dado, or slot, always position the guide (edge
guide, straight edge, or board guide) on the
right-hand side of the tool as the cut is made.
Feeding too quickly
Always be alert and exercise extreme caution
in order to maintain control of the tool when
making this type of cut around curves.
In either case, the lateral thrust of the cutting is
always against the guide, as is proper.
Always clamp the workpiece
WARNING
securely and keep a firm grip
Fig. 27d
on the tool base with both hands at all times.
Failure to do so could result in loss of control,
causing possibly serious personal injury.
Feeding too slowly
Rate of Feed
The proper rate of feed depends on several
factors: the hardness and moisture content of
the workpiece, the cutting depth, and the cutting
diameter of the bit. Use a faster rate of feed
when cutting shallow grooves in soft woods,
such as pine. Use a slower rate of feed when
making deep cuts in hardwoods, such as oak.
Kickback may damage the workpiece and
could result in losing control of the tool, causing
possible personal injury.
Feeding too quickly (Fig. 27c)
Forcing the feed of the cutter bit forward
too quickly slows the rotational speed of the
cutter bit and the bit takes larger bites as it
rotates, causing splintering and gouging of the
workpiece. This forcing action can also cause
the router motor to overheat.
Feeding too slowly (Fig. 27d)
When the cutter bit is fed too slowly, the rotating
cutter bit does not cut into new wood rapidly
enough to take a bite. Instead, it scrapes away
sawdust-like particles. This scraping produces
heat, which can glaze, burn, and mar the cut
in the workpiece, and in extreme cases, can
overheat the cutter bit.
The high speed of the cutter bit during a proper
feeding operation (left to right) results in very
little kickback under normal conditions.
-23-
| General | Details |
|---|---|
| Name | FLEX FX4221 24V Trim Router Instruction Manual |
| Make | FLEX |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.88 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding FLEX FX4221 24V Trim Router Instruction Manual, please ask here and describe the problem in detail.
ATEL WB550 Apex 5G CPE Router Owner’s Manual
Teltonika RUT955 Dual SIM 4G LTE and WiFi Cellular Router User Guide
Hisense HBR6303M WiFi Router User Manual
Kangwei ZLT W304VA PRO WIFI6 Wireless Dual Band Router User Manual
ASUS RT-BE86U, RT-BE6800 Dual Band Wi-Fi Router User Guide
legrand RT-20 Router User Guide
xiaomi RB02 AC1200 Gigabit Router User Manual
ADVANTECH ICR-2041 LTE Router User Manual
YESKAMO IPC Router Expand NVR Wifi Area and Strengthen Camera Signal User Guide
Shenzhen 802.11AX Wi-Fi 6 1800M Wireless Router Installation Guide