GEWISS GW A9707 KNX/IP Router Installation Guide
route
If this value is set, all the telegrams that transit in the line/area handled by the router, and are being sent to a
main group address between 0 and 13, are forwarded to the backbone (IP) regardless of the filter table used.
This setting is only used for testing purposes.
filter
If this value is set, the filter table generated by ETS is used to distinguish which of the telegrams transiting in
the line/area handled by the router, and being sent to a main group address between 0 and 13, should be
forwarded to the backbone (IP).
6.2.2 Group telegrams (main groups 14 to 31)
Used to set the behaviour of the router during the transit of BUS telegrams sent to a main group address
between 14 and 31. For the values that can be set, refer to Group telegrams (main groups 0 to 13).
6.2.3 Individual addressed telegrams
Used to set the behaviour of the router during the transit of BUS telegrams sent to a physical address. The
values that can be set are:
block
If this value is set, all the telegrams that transit in the line/area handled by the router, and are being sent to a
physical address, are not forwarded to the backbone (IP).
route
If this value is set, all the telegrams that transit in the line/area handled by the router, and are being sent to a
physical address, are forwarded to the backbone (IP) regardless of the filter table used.
filter
If this value is set, the filter table generated by ETS is used to distinguish which of the telegrams transiting in
the line/area handled by the router, and being sent to a physical address, should be forwarded to the
backbone (IP).
6.2.4 Broadcast telegrams
Used to set the behaviour of the router during the transit of broadcast BUS telegrams. The values that can
be set are:
block
If this value is set, all the broadcast telegrams that transit in the line/area handled by the router are not
forwarded to the backbone (IP).
route
If this value is set, all the broadcast telegrams that transit in the line/area handled by the router are
forwarded to the backbone (IP).
6.2.5 Acknowledge (ACK) of group telegrams
Used to set the condition that generates the acknowledgement (ACK) by the router of telegrams on the KNX
line that are being sent to any group address. The values that can be set are:
always
If this value is set, an acknowledgement (ACK) is generated for all the telegrams that transit in the line/area
handled by the router, and are being sent to a group address.
only if routed
If this value is set, an acknowledgement (ACK) is only generated for BUS telegrams forwarded to the
backbone line (IP) and being sent to a group address.
11
| General | Details |
|---|---|
| Name | GEWISS GW A9707 KNX/IP Router Installation Guide |
| Make | GEWiSS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.38 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding GEWISS GW A9707 KNX/IP Router Installation Guide, please ask here and describe the problem in detail.
VIRTUAL ACCESS GW1000M Series Router User Manual
GlocalMe G4 Pro 4G LTE Mobile WiFi Router User Guide
TP-Link RM100 Router WiFi 4G LTE 300MBPS User Manual
Netcomm NF18MESH Upgraded WiFi Router User Guide
trend T1ETS Electric Trim Router Instruction Manual
TP-Link TL-WR802N 300Mbps Wireless N Nano Router User Manual
Cudy WR3000 AX3000 Gigabit Wi-Fi 6 Mesh Router Installation Guide
Kangwei ZLT W304VA PRO WIFI6 Wireless Dual Band Router User Manual
ASUS RT-AX58U AX3000 Dual Band Wi-Fi Router User Guide
D-Link DIR-601 Wireless-N 150 Home Router Instructions