GEWISS GW A9707 KNX/IP Router Installation Guide
6.2.6 Acknowledge (ACK) of individual addressed telegrams
Used to set the condition that generates the acknowledgement (ACK) by the router of telegrams on the KNX
line that are being sent to any physical address. The values that can be set are:
always
If this value is set, an acknowledgement (ACK) is generated for all the telegrams that transit in the line/area
handled by the router, and are being sent to a physical address.
only if routed
If this value is set, an acknowledgement (ACK) is only generated for BUS telegrams forwarded to the
backbone line (IP) and being sent to a physical address.
answer with NACK
If this value is set, a negative acknowledgement (NACK) is generated for all the telegrams that transit in the
line/area handled by the router, and are being sent to a physical address. This means that communication on
the KNX line with telegrams being sent to a physical address is not possible. None of this affects the transit
of telegrams being sent to any group address. This setting can be used to impede any attempt to tamper
with the KNX devices.
ATTENTION !!!: if this setting is applied, the configuration of the router can no longer be modified except via
another KNX/IP Router belonging to a different line (so that the configuration is made via telegrams on the IP
backbone and not on the KNX BUS line).
6.3
Routing (IP -> KNX)” menu
This menu contains the parameters for configuring the behaviour of the device when the telegrams transit on
the IP backbone line, defining their blockage or forwarding towards the KNX line.
6.3.1 Group telegrams (main groups 0 to 13)
Used to set the behaviour of the router during the transit of telegrams on the IP backbone, being sent to a
main group address between 0 and 13. The values that can be set are:
block
If this value is set, the telegrams being sent to a main group address between 0 and 13 are not forwarded in
the KNX line/area handled by the router.
route
If this value is set, the telegrams being sent to a main group address between 0 and 13 are forwarded in the
KNX line/area handled by the router, regardless of the filter table used. This setting is only used for testing
purposes.
12
| General | Details |
|---|---|
| Name | GEWISS GW A9707 KNX/IP Router Installation Guide |
| Make | GEWiSS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.38 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding GEWISS GW A9707 KNX/IP Router Installation Guide, please ask here and describe the problem in detail.
Tenda TX2 Pro Dual Band Gigabit WiFi 6 Router Owner’s Manual
CARRY CDA3-20 M4 Mesh Wi-Fi Router User Guide
Edge-core AS7926-40XKFB 100G Aggregation Router User Guide
Harvilon MT6833 5G Portable Wi-Fi Hotspot Esim Router User Guide
Cudy WR3000 Wireless WiFi Router Installation Guide
Beijer ELECTRONICS MAEN327 Cloud VPN Router User Guide
xiaomi RA70 Mi Home Router User Guide
CastleNet EBM562 Mesh WiFi Router Installation Guide
REYEE AX3000 Home Wi-Fi Router Instruction Manual
LANCOM 1793VAW VPN Router User Guide