GEWISS GW A9707 KNX/IP Router Installation Guide
7.4 Via a direct IP connection
Whereas the transmission speed for the KNXnet/IP Tunnelling and KNXnet/IP Routing connections is limited
to that of the KNX TP line, with a direct IP connection you can download the router configuration more
quickly. A direct IP connection is only possible if the device has already a valid IP configuration and a
physical address. To enable this option, go to the Bus Connections Options window of ETS5 and select
the “Use direct IP connection if available” option. The router parameters will be downloaded directly onto the
device, and the operation will not be visible in the ETS line control.
NOTE: During ETS application download, the device operating mode status LED (Mode) blinks green.
8 Multi-connection activation without ETS (for use with the
Easy Controller)
In order to use the router without the aid of ETS (e.g. with the Easy Controller), you can activate the multi-
connection directly from the device; the additional addresses will be automatically assigned by the device
itself.
To activate the multi-connection, press the physical address programming push-button for at least 1 second;
the programming LED will light up briefly, and the device will automatically assign the additional addresses.
With the factory configurations, the addresses assigned are:
Physical address
Connection 1
Connection 2
Connection 3
Connection 4
Connection 5
15.15.0 (default)
15.15.250 (default)
15.15.251 (multi-connection assignment)
15.15.252 (multi-connection assignment)
15.15.253 (multi-connection assignment)
15.15.254 (multi-connection assignment)
Remember that, with the factory setting, the IP address is automatically assigned via DHCP; in order to work
properly when using Easy Controller, there must be a DHCP server installed on the LAN network (many DSL
routers have a built-in DHCP server).
16
| General | Details |
|---|---|
| Name | GEWISS GW A9707 KNX/IP Router Installation Guide |
| Make | GEWiSS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.38 MB |
(1 votes, average: 5.00 out of 5)
Loading...
If you have any questions regarding GEWISS GW A9707 KNX/IP Router Installation Guide, please ask here and describe the problem in detail.
DIGI WR21-M52A-DE1-TB TransPort WR21 Cellular Router User Guide
LINOVISION IoT-R32L Router User Guide
orbi RBR860 WiFi 6 Tri-Band Mesh Router User Guide
Qolsys IQ WiFi 6 Router Instruction Manual
Cisco RV160 Router User Guide
ASUS RP-AX56 Dual Band Wireless Router User Guide
TP-Link NE200 Outdoor Router Installation Guide
SKIL RT1323-00 10 Amp Fixed Base Corded Router Owner’s Manual
ASUS GT-AX6000 Dual Band WiFi 6 Extendable Gaming Router User Guide
NETGEAR BE9300 Nighthawk WiFi 7 Tri-Band Router Owner’s Manual