GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide

All trusted Certificates: Both built-in and uploaded Certificates  

Configures the Root CA version. can be set to either Current root or new root.  

Default Value is New Root.  

Root CA Version  

Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT8xx has built-in  

private key and SSL certificate.  

SIP TLS Certificate  

Maximum supported length is 4069.  

Specifies TLS private key used for SIP over TLS is in X.509 format.  

Maximum supported length is 4069.  

SIP TLS Private Key  

SIP TLS Private Key Password  

Specifies SSL Private key password used for SIP Transport in TLS/TCP.  

Custom Certificate  

Allows users to update to the device their own certificate signed by a custom CA certificate to  

manage client authentication.  

(Private Key + Certificate)  

Configures the Gen-2 Elliptic Curve Private Key. based on RFC 5915.  

The Max value length is 8192 characters.  

Gen-2 EC private key  

Enable TR-069  

Sets the phone adapter system to enable the “CPE WAN Management Protocol” (TR-069).  

Default setting is Yes.  

Note: New Parameters were added to the TR069 Data model starting from Firmware version  

1.0.47.4  

TR-069 firewall rules  

ACS URL  

Configures the TR-069 firewall rules , Value port range is 1-65535  

Specifies URL of TR-069 Auto Configuration Servers (e.g., http://acs.mycompany.com), or IP  

address.  

Default setting is: “https://acs.gdms.cloud”  

Enters username to authenticate to ACS.  

Enters password to authenticate to ACS.  

ACS Username  

ACS Password  

Periodic Inform Enable  

Sends periodic inform packets to ACS. Default is Yes.  

Sets frequency that the inform packets will be sent out to ACS.  

Default is 86400 seconds.  

Periodic Inform Interval  

Connection Request Username  

Connection Request Password  

Connection Request Port  

CPE SSL Certificate  

CPE SSL Private Key  

Enable SNMP  

Enters username for ACS to connect to the HT8xx.  

Enters password for ACS to connect to the HT8xx.  

Configures the TR-069 connection request port. The value range is 0 to 65535.Default is 7547  

Configures the Cert File for the phone adapter to connect to the ACS via SSL.  

Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.  

Default is No.  

SNMP Version  

Choose between (Version 1, Version 2c, or Version 3).  

Listening Port of SNMP daemon (Default 161).  

SNMP Port  

IP address of trap destination. Up to 3 trap destinations are supported. Users should enter the IP  

addresses separated with comma (,).  

SNMP Trap IPAddress  

SNMP Trap port  

Port of Trap destination (Default 162)  

Choose between (Version 1, Version 2c, or Version 3).  

Time interval between traps (Default is 5).  

Name of SNMPv1/v2c community.  

SNMP Trap Version  

SNMP Trap Interval  

SNMPv1/v2c Community  

SNMPv1/v2c Trap Community  

SNMPv3 Username  

Name of SNMPv1/v2c trap community.  

Username for SNMPv3.  

noAuthUser: Users with security level noAuthnoPriv and context name as noAuth.  

authUser: Users with security level authNoPriv and context name as auth.  

privUser: Users with security level authPriv and context name as priv.  

SNMPv3 Security Level  

SNMPv3 Authentication Protocol  

SNMPv3 Privacy Protocol  

SNMPv3 Authentication Key  

SNMPv3 Privacy Key  

Select the Authentication Protocol: “None” or “MD5” or “SHA.”  

Select the Privacy Protocol: “None” or “AES/AES128” or “DES”.  

Enter the Authentication Key.  

Enter the Privacy Key.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide, please ask here and describe the problem in detail.