GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide

offering a reboot button on the web page.  

Saving the Configuration Changes  

After users make changes to the configuration, pressing Update button will save but not apply the changes until Apply  

button is clicked. Users can instead directly press Apply button. When a reboot is required to apply changes, the web page  

will prompt the user to reboot by offering a reboot button on the web page.  

Changing Admin Level Password  

1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.  

2. Enter your admin password (default: admin).  

3. Press Login to access your settings.  

4. Go to Advanced Settings  New Admin Password and enter the new admin password.  

5. Confirm the new admin password.  

6. Press Apply at the bottom of the page to save your new settings.  

Figure 7: Admin Level Password  

Changing User Level Password  

1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.  

2. Enter your admin password (default: admin).  

3. Press Login to access your settings.  

4. Go to Basic Settings  New End User Password and enter the new end-user password.  

5. Confirm the new end-user password.  

6. Press Apply at the bottom of the page to save your new settings.  

Figure 8: User Level Password  

Changing Viewer Password  

1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.  

2. Enter your admin password (default: admin).  

3. Press Login to access your settings.  

4. Go to Basic Settings  New Viewer Password and enter the new viewer password.  

5. Confirm the new viewer password.  

6. Press Apply at the bottom of the page to save your new settings.  

Figure 9: Viewer Level Password  

Changing HTTP Web Port  

1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.  

2. Enter your admin password (default: admin).  

3. Press Login to access your settings.  

4. Go to Basic Settings  HTTP Web Port.  

5. Make sure that the Web Access Mode is set to HTTP.  

6. Change the current port to your desired/new HTTP port. Ports accepted are in range [1-65535].  

7. Press Apply at the bottom of the page to save your new settings  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide, please ask here and describe the problem in detail.