GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide

Menu  

Voice Prompt  

Options  

Press “*” for the next menu option  

Main  

Menu  

“Enter a Menu Option”  

Press “#” to return to the main menu  

Enter 01-05, 07,10, 12-17,47 or 99 menu options  

Press “9” to toggle the selection  

If using “Static IP Mode”, configure the IP address information using menus 02  

to 05.  

“DHCP Mode”,  

“Static IP Mode”  

“PPPoE Mode“  

01  

If using “Dynamic IP Mode”, all IP address information comes from the DHCP  

server automatically after reboot.  

If using “PPPoE Mode”, configure PPPoE Username and Password from web GUI  

to get IP from your ISP.  

The current WAN IP address is announced  

02  

“IP Address“ + IP address  

If using “Static IP Mode”, enter 12-digit new IP address. You need to reboot  

your HT812/HT814 for the new IP address to take Effect.  

03  

04  

05  

“Subnet“ + IP address  

“Gateway“ + IP address  

“DNS Server“ + IP address  

Same as menu 02  

Same as menu 02  

Same as menu 02  

Press “9” to move to the next selection in the list:  

PCM U / PCM A  

iLBC  

G-726  

07  

Preferred Vocoder  

G-723  

G-729  

OPUS  

G722  

Announces the MAC address of the unit.  

10  

12  

“MAC Address”  

Note: The device has two MAC addresses. One for the WAN port and one for  

the LAN port. The device MAC address announced is the address of LAN port.  

Press “9” to toggle between enable / disable.  

WAN Port Web Access  

Default is disabled.  

13  

14  

Firmware Server IP Address  

Announces current Firmware Server IP address. Enter 12-digit new IP address.  

Announces current Config Server Path IP address. Enter 12-digit new IP address.  

Configuration Server IP  

Address  

Upgrade protocol for firmware and configuration update. Press “9” to toggle  

between TFTP / HTTP / FTP / FTPS or HTTPS. Default is HTTPS.  

15  

16  

Upgrade Protocol  

Firmware Version  

Announces Firmware version information.  

Firmware upgrade mode. Press “9” to toggle among the following three  

options:  

17  

Firmware Upgrade  

Always check  

Check when pre/suffix changes  

Never upgrade  

“Check Device Individual  

Certificate Information”  

The users can now use the IVR system to obtain specific details about the  

device’s certificate.  

20  

47  

Enter the target IP address to make a direct IP call, after dial tone. (See “Make a  

Direct IP Call”.)  

“Direct IP Calling”  

Voice Mail  

86  

99  

Access to your voice mails messages.  

Press “9” to reboot the device  

“RESET”  

Enter MAC address to restore factory default setting  

(See Restore Factory Default Setting section)  

“Invalid Entry”  

Automatically returns to main menu  

This prompt will be played immediately after off hook If the device is not  

registered and the option “Outgoing Call without Registration” is in NO  

“Device not registered”  

Table 5: Voice Prompt Menu  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide
Make	GRANDSTREAM
Language	English
Filetype	PDF (Download)
File size	MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL WI-FI INSTRUCTIONS & USER MANUALS
• GRANDSTREAM

Questions and Answers (0)

If you have any questions regarding GRANDSTREAM HT812 Analog FXS IP Gateway 2 Port + NAT Router User Guide, please ask here and describe the problem in detail.